media-gfx/sane-backends: remove no longer needed sane-backends-1.0.25_pre20150628

2 files changed, 0 insertions, 347 deletions

diff --git a/media-gfx/sane-backends/Manifest b/media-gfx/sane-backends/Manifest
index 71000610f8b2..c55f6ece576f 100644
--- a/media-gfx/sane-backends/Manifest
+++ b/media-gfx/sane-backends/Manifest
@@ -1,3 +1,2 @@
 DIST sane-backends-1.0.24.tar.gz 5778749 SHA256 27c7085a54f1505d8b551e6f1e69d30e1ee57328b18429bb2225dabf4c45462d SHA512 1e9f962bb9d27f17067eb662dabfc0a1aa0d06e16bec4bd28868124b468578d82f14f6d2c1f5de63d2cec57ca4584ec12d3b2c2b1de20f1199aece581453ebc5 WHIRLPOOL 19b939c920a3c157044c85a941debdc664d8781562fa3fc04f061b9d216b089be80edfd43479069382adf13e68160518fdbd5c84a5f4c506a46f8521d4ed2a1c
 DIST sane-backends-1.0.25.tar.gz 5955016 SHA256 a4d7ba8d62b2dea702ce76be85699940992daf3f44823ddc128812da33dc6e2c SHA512 b9548646fff13558a4da4a4e9e8bad730f05121bcc65b72d24ded3bfddc6fe574e08c39c8651544b8fbfeab036fffd76cc14d76ef5d5d47e7513a2ce3afcc9df WHIRLPOOL 557a3ac8785c0dd7f98aa55d5edaf76fb5b2b3c86a2431bb40b5b132ac05de3abcb250a8bcf8ed188868c4f124ce0a323a92a5a83c7b44a20908fe40ca323711
-DIST sane-backends-git20150628.tar.gz 5765552 SHA256 4cfd1245df8ade75cbfaedec91b1daaea6d30e0736e5d2f9afcd0a56fc357711 SHA512 8e8160b2337502a0b77724ffaa5bd65a6daaa3fa5587f1b72e2714c9253e8130e96170d7f1de38210e17c5524cbe0953ff0464d29db194354d4e9b7249782eaf WHIRLPOOL d9b9a4f44cb3fcda9c8099d5ed3a9764e0a961f80ae1a89dda4e0ec8e6c24c830ad0feebd13c28af848c133a99e50d21c2f01269e434af31b17164a377edbbff
diff --git a/media-gfx/sane-backends/sane-backends-1.0.25_pre20150628.ebuild b/media-gfx/sane-backends/sane-backends-1.0.25_pre20150628.ebuild
deleted file mode 100644
index 61a6e8fc0f35..000000000000
--- a/media-gfx/sane-backends/sane-backends-1.0.25_pre20150628.ebuild
+++ /dev/null
@@ -1,346 +0,0 @@
-# Copyright 1999-2015 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Id$
-
-EAPI="5"
-
-inherit autotools eutils flag-o-matic multilib multilib-minimal udev user toolchain-funcs
-
-# gphoto and v4l are handled by their usual USE flags.
-# The pint backend was disabled because I could not get it to compile.
-IUSE_SANE_BACKENDS="
-	abaton
-	agfafocus
-	apple
-	artec
-	artec_eplus48u
-	as6e
-	avision
-	bh
-	canon
-	canon630u
-	canon_dr
-	canon_pp
-	cardscan
-	coolscan
-	coolscan2
-	coolscan3
-	dc210
-	dc240
-	dc25
-	dell1600n_net
-	dmc
-	epjitsu
-	epson
-	epson2
-	fujitsu
-	genesys
-	gt68xx
-	hp
-	hp3500
-	hp3900
-	hp4200
-	hp5400
-	hp5590
-	hpljm1005
-	hpsj5s
-	hs2p
-	ibm
-	kodak
-	kodakaio
-	kvs1025
-	kvs20xx
-	kvs40xx
-	leo
-	lexmark
-	ma1509
-	magicolor
-	matsushita
-	microtek
-	microtek2
-	mustek
-	mustek_pp
-	mustek_usb
-	mustek_usb2
-	nec
-	net
-	niash
-	p5
-	pie
-	pixma
-	plustek
-	plustek_pp
-	pnm
-	qcam
-	ricoh
-	rts8891
-	s9036
-	sceptre
-	sharp
-	sm3600
-	sm3840
-	snapscan
-	sp15c
-	st400
-	stv680
-	tamarack
-	teco1
-	teco2
-	teco3
-	test
-	u12
-	umax
-	umax1220u
-	umax_pp
-	xerox_mfp"
-
-IUSE="avahi doc gphoto2 ipv6 nls snmp systemd threads usb v4l xinetd"
-
-for backend in ${IUSE_SANE_BACKENDS}; do
-	case ${backend} in
-	# Disable backends that require parallel ports as no one has those anymore.
-	canon_pp|hpsj5s|mustek_pp|\
-	pnm)
-		IUSE+=" -sane_backends_${backend}"
-		;;
-	mustek_usb2|kvs40xx)
-		IUSE+=" sane_backends_${backend}"
-		;;
-	*)
-		IUSE+=" +sane_backends_${backend}"
-	esac
-done
-
-REQUIRED_USE="
-	sane_backends_mustek_usb2? ( threads )
-	sane_backends_kvs40xx? ( threads )
-"
-
-DESCRIPTION="Scanner Access Now Easy - Backends"
-HOMEPAGE="http://www.sane-project.org/"
-case ${PV} in
-9999)
-	EGIT_REPO_URI="git://anonscm.debian.org/sane/sane-backends.git"
-	inherit git-r3
-	;;
-*_pre*)
-	MY_P="${PN}-git${PV#*_pre}"
-	SRC_URI="http://www.sane-project.org/snapshots/${MY_P}.tar.gz
-		mirror://gentoo/${MY_P}.tar.gz"
-	S=${WORKDIR}/${MY_P}
-	;;
-*)
-	MY_P=${P}
-	SRC_URI="https://alioth.debian.org/frs/download.php/file/3958/${P}.tar.gz"
-	;;
-esac
-
-LICENSE="GPL-2 public-domain"
-SLOT="0"
-if [[ ${PV} != "9999" ]] ; then
-	KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sh ~sparc ~x86 ~x86-fbsd ~amd64-linux ~x86-linux"
-fi
-
-RDEPEND="
-	sane_backends_dc210? ( >=virtual/jpeg-0-r2[${MULTILIB_USEDEP}] )
-	sane_backends_dc240? ( >=virtual/jpeg-0-r2[${MULTILIB_USEDEP}] )
-	sane_backends_dell1600n_net? ( >=virtual/jpeg-0-r2[${MULTILIB_USEDEP}]
-									>=media-libs/tiff-3.9.7-r1[${MULTILIB_USEDEP}] )
-	avahi? ( >=net-dns/avahi-0.6.31-r2[${MULTILIB_USEDEP}] )
-	sane_backends_canon_pp? ( >=sys-libs/libieee1284-0.2.11-r3[${MULTILIB_USEDEP}] )
-	sane_backends_hpsj5s? ( >=sys-libs/libieee1284-0.2.11-r3[${MULTILIB_USEDEP}] )
-	sane_backends_mustek_pp? ( >=sys-libs/libieee1284-0.2.11-r3[${MULTILIB_USEDEP}] )
-	usb? ( >=virtual/libusb-1-r1:1[${MULTILIB_USEDEP}] )
-	gphoto2? (
-		>=media-libs/libgphoto2-2.5.3.1:=[${MULTILIB_USEDEP}]
-		>=virtual/jpeg-0-r2[${MULTILIB_USEDEP}]
-	)
-	v4l? ( >=media-libs/libv4l-0.9.5[${MULTILIB_USEDEP}] )
-	xinetd? ( sys-apps/xinetd )
-	snmp? ( net-analyzer/net-snmp )
-	systemd? ( sys-apps/systemd:0= )
-"
-
-DEPEND="${RDEPEND}
-	v4l? ( sys-kernel/linux-headers )
-	doc? (
-		virtual/latex-base
-		dev-texlive/texlive-latexextra
-	)
-	>=virtual/pkgconfig-0-r1[${MULTILIB_USEDEP}]"
-
-# We now use new syntax construct (SUBSYSTEMS!="usb|usb_device)
-RDEPEND="${RDEPEND}
-	!<sys-fs/udev-114
-	abi_x86_32? (
-		!<=app-emulation/emul-linux-x86-medialibs-20140508
-		!app-emulation/emul-linux-x86-medialibs[-abi_x86_32(-)]
-	)"
-
-MULTILIB_CHOST_TOOLS=(
-	/usr/bin/sane-config
-)
-
-pkg_setup() {
-	enewgroup scanner
-	enewuser saned -1 -1 -1 scanner
-}
-
-src_prepare() {
-	cat >> backend/dll.conf.in <<-EOF
-	# Add support for the HP-specific backend.  Needs net-print/hplip installed.
-	hpaio
-	# Add support for the Epson-specific backend.  Needs media-gfx/iscan installed.
-	epkowa
-	EOF
-	epatch "${FILESDIR}"/niash_array_index.patch \
-		"${FILESDIR}"/${PN}-1.0.24-automagic_systemd.patch \
-		"${FILESDIR}"/${PN}-1.0.24-systemd_pkgconfig.patch \
-		"${FILESDIR}"/${PN}-1.0.24-saned_pidfile_location.patch \
-		"${FILESDIR}"/${PN}-1.0.24-cross-compile.patch \
-		"${FILESDIR}"/${PN}-1.0.25-disable-usb-tests.patch
-	# Fix for "make check".
-	sed -i -e 's/sane-backends 1.0.24/sane-backends 1.0.25git/' testsuite/tools/data/html*
-	mv configure.{in,ac} || die
-	AT_NOELIBTOOLIZE=yes eautoreconf
-}
-
-src_configure() {
-	append-flags -fno-strict-aliasing
-
-	# if LINGUAS is set, just use the listed and supported localizations.
-	if [[ ${LINGUAS+set} == "set" ]]; then
-		mkdir -p po || die
-		strip-linguas -u po
-		printf '%s\n' ${LINGUAS} > po/LINGUAS
-	fi
-
-	multilib-minimal_src_configure
-}
-
-multilib_src_configure() {
-	# the blank is intended - an empty string would result in building ALL backends.
-	local BACKENDS=" "
-
-	use gphoto2 && BACKENDS="gphoto2"
-	use v4l && BACKENDS="${BACKENDS} v4l"
-	for backend in ${IUSE_SANE_BACKENDS}; do
-		if use "sane_backends_${backend}" && [ ${backend} != pnm ]; then
-			BACKENDS="${BACKENDS} ${backend}"
-		fi
-	done
-
-	local myconf=(
-		$(use_enable usb libusb_1_0)
-		$(multilib_native_use_with snmp)
-	)
-
-	# you can only enable this backend, not disable it...
-	if use sane_backends_pnm; then
-		myconf+=( --enable-pnm-backend )
-	fi
-	if ! use doc; then
-		myconf+=( --disable-latex )
-	fi
-	if use sane_backends_mustek_pp; then
-		myconf+=( --enable-parport-directio )
-	fi
-	if ! { use sane_backends_canon_pp || use sane_backends_hpsj5s || use sane_backends_mustek_pp; }; then
-		myconf+=( sane_cv_use_libieee1284=no )
-	fi
-
-	# relative path must be used for tests to work properly
-	ECONF_SOURCE=${S} \
-	SANEI_JPEG="sanei_jpeg.o" SANEI_JPEG_LO="sanei_jpeg.lo" \
-	BACKENDS="${BACKENDS}" \
-	econf \
-		$(use_with gphoto2) \
-		$(multilib_native_use_with systemd) \
-		$(use_with v4l) \
-		$(use_enable avahi) \
-		$(use_enable ipv6) \
-		$(use_enable nls translations) \
-		$(use_enable threads pthread) \
-		"${myconf[@]}"
-}
-
-multilib_src_compile() {
-	emake VARTEXFONTS="${T}/fonts"
-
-	if tc-is-cross-compiler; then
-		pushd "${BUILD_DIR}"/tools >/dev/null || die
-
-		# The build system sucks and doesn't handle this properly.
-		# https://alioth.debian.org/tracker/index.php?func=detail&aid=314236&group_id=30186&atid=410366
-		tc-export_build_env BUILD_CC
-		${BUILD_CC} ${BUILD_CPPFLAGS} ${BUILD_CFLAGS} ${BUILD_LDFLAGS} \
-			-I. -I../include -I"${S}"/include \
-			"${S}"/sanei/sanei_config.c "${S}"/sanei/sanei_constrain_value.c \
-			"${S}"/sanei/sanei_init_debug.c "${S}"/tools/sane-desc.c -o sane-desc || die
-		local dirs=( hal hotplug hotplug-ng udev )
-		local targets=(
-			hal/libsane.fdi
-			hotplug/libsane.usermap
-			hotplug-ng/libsane.db
-			udev/libsane.rules
-		)
-		mkdir -p "${dirs[@]}" || die
-		emake "${targets[@]}"
-
-		popd >/dev/null
-	fi
-
-	if use usb; then
-		sed -i -e '/^$/d' \
-			tools/hotplug/libsane.usermap || die
-	fi
-}
-
-multilib_src_install() {
-	emake INSTALL_LOCKPATH="" DESTDIR="${D}" install \
-		docdir="${EPREFIX}"/usr/share/doc/${PF}
-
-	if multilib_is_native_abi; then
-		if use usb; then
-			insinto /etc/hotplug/usb
-			doins tools/hotplug/libsane.usermap
-		fi
-
-		udev_newrules tools/udev/libsane.rules 41-libsane.rules
-		insinto "/usr/share/pkgconfig"
-		doins tools/sane-backends.pc
-	fi
-}
-
-multilib_src_install_all() {
-	keepdir /var/lib/lock/sane
-	fowners root:scanner /var/lib/lock/sane
-	fperms g+w /var/lib/lock/sane
-	dodir /etc/env.d
-
-	if use usb; then
-		exeinto /etc/hotplug/usb
-		doexe tools/hotplug/libusbscanner
-		newdoc tools/hotplug/README README.hotplug
-	fi
-
-	dodoc NEWS AUTHORS ChangeLog* PROBLEMS README README.linux
-	prune_libtool_files --all
-	if use xinetd; then
-		insinto /etc/xinetd.d
-		doins "${FILESDIR}"/saned
-	fi
-
-	newinitd "${FILESDIR}"/saned.initd saned
-	newconfd "${FILESDIR}"/saned.confd saned
-}
-
-pkg_postinst() {
-	if use xinetd; then
-		elog "If you want remote clients to connect, edit"
-		elog "/etc/sane.d/saned.conf and /etc/hosts.allow"
-	fi
-
-	elog "If you are using a USB scanner, add all users who want"
-	elog "to access your scanner to the \"scanner\" group."
-}