media-gfx/sane-backends: Drop live ebuild as this package lacks a maintainer and nobody is taking care of keeping it updated with upstream changes

Package-Manager: portage-2.3.1

1 files changed, 0 insertions, 347 deletions

diff --git a/media-gfx/sane-backends/sane-backends-9999.ebuild b/media-gfx/sane-backends/sane-backends-9999.ebuild
deleted file mode 100644
index 9604d38a5827..000000000000
--- a/media-gfx/sane-backends/sane-backends-9999.ebuild
+++ /dev/null
@@ -1,347 +0,0 @@
-# Copyright 1999-2015 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Id$
-
-EAPI="5"
-
-inherit eutils flag-o-matic multilib multilib-minimal udev user toolchain-funcs
-
-# gphoto and v4l are handled by their usual USE flags.
-# The pint backend was disabled because I could not get it to compile.
-IUSE_SANE_BACKENDS="
-	abaton
-	agfafocus
-	apple
-	artec
-	artec_eplus48u
-	as6e
-	avision
-	bh
-	canon
-	canon630u
-	canon_dr
-	canon_pp
-	cardscan
-	coolscan
-	coolscan2
-	coolscan3
-	dc210
-	dc240
-	dc25
-	dell1600n_net
-	dmc
-	epjitsu
-	epson
-	epson2
-	fujitsu
-	genesys
-	gt68xx
-	hp
-	hp3500
-	hp3900
-	hp4200
-	hp5400
-	hp5590
-	hpljm1005
-	hpsj5s
-	hs2p
-	ibm
-	kodak
-	kodakaio
-	kvs1025
-	kvs20xx
-	kvs40xx
-	leo
-	lexmark
-	ma1509
-	magicolor
-	matsushita
-	microtek
-	microtek2
-	mustek
-	mustek_pp
-	mustek_usb
-	mustek_usb2
-	nec
-	net
-	niash
-	p5
-	pie
-	pixma
-	plustek
-	plustek_pp
-	pnm
-	qcam
-	ricoh
-	rts8891
-	s9036
-	sceptre
-	sharp
-	sm3600
-	sm3840
-	snapscan
-	sp15c
-	st400
-	stv680
-	tamarack
-	teco1
-	teco2
-	teco3
-	test
-	u12
-	umax
-	umax1220u
-	umax_pp
-	xerox_mfp"
-
-IUSE="avahi doc gphoto2 ipv6 nls snmp systemd threads usb v4l xinetd"
-
-for backend in ${IUSE_SANE_BACKENDS}; do
-	case ${backend} in
-	# Disable backends that require parallel ports as no one has those anymore.
-	canon_pp|hpsj5s|mustek_pp|\
-	pnm)
-		IUSE+=" -sane_backends_${backend}"
-		;;
-	mustek_usb2|kvs40xx)
-		IUSE+=" sane_backends_${backend}"
-		;;
-	*)
-		IUSE+=" +sane_backends_${backend}"
-	esac
-done
-
-REQUIRED_USE="
-	sane_backends_mustek_usb2? ( threads )
-	sane_backends_kvs40xx? ( threads )
-"
-
-DESCRIPTION="Scanner Access Now Easy - Backends"
-HOMEPAGE="http://www.sane-project.org/"
-case ${PV} in
-9999)
-	EGIT_REPO_URI="git://anonscm.debian.org/sane/sane-backends.git"
-	inherit git-r3 autotools
-	;;
-*_pre*)
-	MY_P="${PN}-git${PV#*_pre}"
-	SRC_URI="http://www.sane-project.org/snapshots/${MY_P}.tar.gz
-		mirror://gentoo/${MY_P}.tar.gz"
-	S=${WORKDIR}/${MY_P}
-	;;
-*)
-	MY_P=${P}
-	FRS_ID="4146"
-	SRC_URI="https://alioth.debian.org/frs/download.php/file/${FRS_ID}/${P}.tar.gz"
-	;;
-esac
-
-LICENSE="GPL-2 public-domain"
-SLOT="0"
-if [[ ${PV} != "9999" ]] ; then
-	KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sh ~sparc ~x86 ~x86-fbsd ~amd64-linux ~x86-linux"
-fi
-
-RDEPEND="
-	sane_backends_dc210? ( >=virtual/jpeg-0-r2:0=[${MULTILIB_USEDEP}] )
-	sane_backends_dc240? ( >=virtual/jpeg-0-r2:0=[${MULTILIB_USEDEP}] )
-	sane_backends_dell1600n_net? (
-		>=virtual/jpeg-0-r2:0=[${MULTILIB_USEDEP}]
-		>=media-libs/tiff-3.9.7-r1:0=[${MULTILIB_USEDEP}]
-	)
-	avahi? ( >=net-dns/avahi-0.6.31-r2[${MULTILIB_USEDEP}] )
-	sane_backends_canon_pp? ( >=sys-libs/libieee1284-0.2.11-r3[${MULTILIB_USEDEP}] )
-	sane_backends_hpsj5s? ( >=sys-libs/libieee1284-0.2.11-r3[${MULTILIB_USEDEP}] )
-	sane_backends_mustek_pp? ( >=sys-libs/libieee1284-0.2.11-r3[${MULTILIB_USEDEP}] )
-	usb? ( >=virtual/libusb-1-r1:1=[${MULTILIB_USEDEP}] )
-	gphoto2? (
-		>=media-libs/libgphoto2-2.5.3.1:=[${MULTILIB_USEDEP}]
-		>=virtual/jpeg-0-r2:0=[${MULTILIB_USEDEP}]
-	)
-	v4l? ( >=media-libs/libv4l-0.9.5[${MULTILIB_USEDEP}] )
-	xinetd? ( sys-apps/xinetd )
-	snmp? ( net-analyzer/net-snmp )
-	systemd? ( sys-apps/systemd:0= )
-"
-
-DEPEND="${RDEPEND}
-	v4l? ( sys-kernel/linux-headers )
-	doc? (
-		virtual/latex-base
-		dev-texlive/texlive-latexextra
-	)
-	>=virtual/pkgconfig-0-r1[${MULTILIB_USEDEP}]"
-
-# We now use new syntax construct (SUBSYSTEMS!="usb|usb_device)
-RDEPEND="${RDEPEND}
-	!<sys-fs/udev-114"
-
-MULTILIB_CHOST_TOOLS=(
-	/usr/bin/sane-config
-)
-
-pkg_setup() {
-	enewgroup scanner
-	enewuser saned -1 -1 -1 scanner
-}
-
-src_prepare() {
-	cat >> backend/dll.conf.in <<-EOF
-	# Add support for the HP-specific backend.  Needs net-print/hplip installed.
-	hpaio
-	# Add support for the Epson-specific backend.  Needs media-gfx/iscan installed.
-	epkowa
-	EOF
-	epatch "${FILESDIR}"/${PN}-1.0.24-saned_pidfile_location.patch
-	epatch "${FILESDIR}"/${PN}-1.0.25-disable-usb-tests.patch
-	if [[ ${PV} == "9999" ]] ; then
-		mv configure.{in,ac} || die
-		AT_NOELIBTOOLIZE=yes eautoreconf
-	fi
-
-	# Fix for "make check".  Upstream sometimes forgets to update this.
-	local ver=$(./configure --version | awk '{print $NF; exit 0}')
-	sed -i \
-		-e "/by sane-desc 3.5 from sane-backends/s:sane-backends .*:sane-backends ${ver}:" \
-		testsuite/tools/data/html* || die
-}
-
-src_configure() {
-	append-flags -fno-strict-aliasing
-
-	# if LINGUAS is set, just use the listed and supported localizations.
-	if [[ ${LINGUAS+set} == "set" ]]; then
-		mkdir -p po || die
-		strip-linguas -u po
-		printf '%s\n' ${LINGUAS} > po/LINGUAS
-	fi
-
-	multilib-minimal_src_configure
-}
-
-multilib_src_configure() {
-	# the blank is intended - an empty string would result in building ALL backends.
-	local BACKENDS=" "
-
-	use gphoto2 && BACKENDS="gphoto2"
-	use v4l && BACKENDS="${BACKENDS} v4l"
-	for backend in ${IUSE_SANE_BACKENDS}; do
-		if use "sane_backends_${backend}" && [ ${backend} != pnm ]; then
-			BACKENDS="${BACKENDS} ${backend}"
-		fi
-	done
-
-	local myconf=(
-		$(use_enable usb libusb_1_0)
-		$(multilib_native_use_with snmp)
-	)
-
-	# you can only enable this backend, not disable it...
-	if use sane_backends_pnm; then
-		myconf+=( --enable-pnm-backend )
-	fi
-	if ! use doc; then
-		myconf+=( --disable-latex )
-	fi
-	if use sane_backends_mustek_pp; then
-		myconf+=( --enable-parport-directio )
-	fi
-	if ! { use sane_backends_canon_pp || use sane_backends_hpsj5s || use sane_backends_mustek_pp; }; then
-		myconf+=( sane_cv_use_libieee1284=no )
-	fi
-
-	# relative path must be used for tests to work properly
-	ECONF_SOURCE=${S} \
-	SANEI_JPEG="sanei_jpeg.o" SANEI_JPEG_LO="sanei_jpeg.lo" \
-	BACKENDS="${BACKENDS}" \
-	econf \
-		$(use_with gphoto2) \
-		$(multilib_native_use_with systemd) \
-		$(use_with v4l) \
-		$(use_enable avahi) \
-		$(use_enable ipv6) \
-		$(use_enable nls translations) \
-		$(use_enable threads pthread) \
-		"${myconf[@]}"
-}
-
-multilib_src_compile() {
-	emake VARTEXFONTS="${T}/fonts"
-
-	if tc-is-cross-compiler; then
-		pushd "${BUILD_DIR}"/tools >/dev/null || die
-
-		# The build system sucks and doesn't handle this properly.
-		# https://alioth.debian.org/tracker/index.php?func=detail&aid=314236&group_id=30186&atid=410366
-		tc-export_build_env BUILD_CC
-		${BUILD_CC} ${BUILD_CPPFLAGS} ${BUILD_CFLAGS} ${BUILD_LDFLAGS} \
-			-I. -I../include -I"${S}"/include \
-			"${S}"/sanei/sanei_config.c "${S}"/sanei/sanei_constrain_value.c \
-			"${S}"/sanei/sanei_init_debug.c "${S}"/tools/sane-desc.c -o sane-desc || die
-		local dirs=( hal hotplug hotplug-ng udev )
-		local targets=(
-			hal/libsane.fdi
-			hotplug/libsane.usermap
-			hotplug-ng/libsane.db
-			udev/libsane.rules
-		)
-		mkdir -p "${dirs[@]}" || die
-		emake "${targets[@]}"
-
-		popd >/dev/null
-	fi
-
-	if use usb; then
-		sed -i -e '/^$/d' \
-			tools/hotplug/libsane.usermap || die
-	fi
-}
-
-multilib_src_install() {
-	emake INSTALL_LOCKPATH="" DESTDIR="${D}" install \
-		docdir="${EPREFIX}"/usr/share/doc/${PF}
-
-	if multilib_is_native_abi; then
-		if use usb; then
-			insinto /etc/hotplug/usb
-			doins tools/hotplug/libsane.usermap
-		fi
-
-		udev_newrules tools/udev/libsane.rules 41-libsane.rules
-		insinto "/usr/share/pkgconfig"
-		doins tools/sane-backends.pc
-	fi
-}
-
-multilib_src_install_all() {
-	keepdir /var/lib/lock/sane
-	fowners root:scanner /var/lib/lock/sane
-	fperms g+w /var/lib/lock/sane
-	dodir /etc/env.d
-
-	if use usb; then
-		exeinto /etc/hotplug/usb
-		doexe tools/hotplug/libusbscanner
-		newdoc tools/hotplug/README README.hotplug
-	fi
-
-	dodoc NEWS AUTHORS ChangeLog* PROBLEMS README README.linux
-	prune_libtool_files --all
-	if use xinetd; then
-		insinto /etc/xinetd.d
-		doins "${FILESDIR}"/saned
-	fi
-
-	newinitd "${FILESDIR}"/saned.initd saned
-	newconfd "${FILESDIR}"/saned.confd saned
-}
-
-pkg_postinst() {
-	if use xinetd; then
-		elog "If you want remote clients to connect, edit"
-		elog "/etc/sane.d/saned.conf and /etc/hosts.allow"
-	fi
-
-	elog "If you are using a USB scanner, add all users who want"
-	elog "to access your scanner to the \"scanner\" group."
-}