Version bump

Package-Manager: portage-2.0.51.22-r1

1 files changed, 227 insertions, 0 deletions

diff --git a/net-misc/zaptel/zaptel-1.0.8.ebuild b/net-misc/zaptel/zaptel-1.0.8.ebuild
new file mode 100644
index 000000000000..5d5d593a0783
--- /dev/null
+++ b/net-misc/zaptel/zaptel-1.0.8.ebuild
@@ -0,0 +1,227 @@
+# Copyright 1999-2005 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/net-misc/zaptel/zaptel-1.0.8.ebuild,v 1.1 2005/06/25 08:56:54 stkn Exp $
+
+IUSE="devfs26 bri florz"
+
+inherit toolchain-funcs eutils linux-mod
+
+BRI_VERSION="0.2.0-RC8h"
+FLORZ_VERSION="0.2.0-RC8a_florz-6"
+
+DESCRIPTION="Drivers for Digium and ZapataTelephony cards"
+HOMEPAGE="http://www.asterisk.org"
+SRC_URI="ftp://ftp.asterisk.org/pub/telephony/zaptel/zaptel-${PV}.tar.gz
+	 bri? ( http://www.junghanns.net/asterisk/downloads/bristuff-${BRI_VERSION}.tar.gz )
+	 florz? ( http://zaphfc.florz.dyndns.org/zaphfc_${FLORZ_VERSION}.diff.gz )"
+
+SLOT="0"
+LICENSE="GPL-2"
+KEYWORDS="~x86 ~ppc ~amd64"
+
+DEPEND="virtual/libc
+	virtual/linux-sources
+	>=dev-libs/newt-0.50.0"
+
+pkg_setup() {
+	linux-mod_pkg_setup
+
+	# show an nice warning message about zaptel not supporting devfs on 2.6
+	if kernel_is 2 6 && linux_chkconfig_present DEVFS_FS ; then
+		echo
+		einfo "You're using a 2.6 kernel with DEVFS."
+		einfo "The Zaptel drivers won't work unless you either:"
+		einfo "   * switch to udev"
+		einfo "   * write a script that re-creates the necessary device nodes for you"
+		einfo "   * enable the devfs26 useflag (see below)"
+		einfo ""
+		einfo "There's an experimental patch which adds devfs support when using linux-2.6, but:"
+		einfo "  1. It's an ugly hack atm and needs a cleanup..."
+		einfo "  2. I was only abled to test loding / unloading with the ztd-eth driver..."
+		einfo "  3. I _really_ don't know if it works with real hardware..."
+		einfo "  4. It disables udev support to avoid conflicts"
+		eerror "  5. And more important: This is not officially supported by Digium / the Asterisk project!"
+		einfo ""
+		einfo "If you're still interested, abort now (ctrl+c) and enable the devfs26 USE-flag"
+		einfo "Feedback and bug-reports should go to: stkn@gentoo.org"
+		einfo "You have been warned!"
+		echo
+		einfo "Sleeping 20 Seconds..."
+		epause 20
+	fi
+}
+
+src_unpack() {
+	unpack ${A}
+
+	cd ${S}
+	# >= 1.0.7 requires new patch (-modulesd patch renamed to -gentoo)
+	epatch ${FILESDIR}/${PN}-1.0.8-gentoo.diff
+
+	# devfs support
+	if use devfs26; then
+		einfo "Enabling experimental devfs support for linux-2.6..."
+		epatch ${FILESDIR}/${PN}-1.0.4-experimental-devfs26.diff
+
+		# disable udev
+		sed -i -e "s:#define[\t ]\+\(CONFIG_ZAP_UDEV\):#undef \1:" \
+			zconfig.h
+	fi
+
+	# apply patch for gcc-3.4.x if that's the compiler in use...
+	# fixes (#76707)
+	if use x86 && [[ `gcc-fullversion` = "3.4.3" ]]; then
+		epatch ${FILESDIR}/${PN}-1.0.4-gcc34.patch
+	fi
+
+	# try to apply bristuff patch
+	if use bri; then
+		einfo "Patching zaptel w/ BRI stuff (${BRI_VERSION})"
+		epatch ${FILESDIR}/zaptel-bristuff-${BRI_VERSION}.patch
+
+		cd ${WORKDIR}/bristuff-${BRI_VERSION}
+
+		if use florz; then
+			einfo "Using florz patches (${FLORZ_VERSION}) for zaphfc"
+
+			# remove as soon as there's a new florz patch available
+			sed -i -e "s:zaptel-1\.0\.7:zaptel-1.0.8:g" \
+				${WORKDIR}/zaphfc_${FLORZ_VERSION}.diff
+
+			epatch ${WORKDIR}/zaphfc_${FLORZ_VERSION}.diff
+		fi
+
+		# patch includes
+		sed -i  -e "s:^#include.*zaptel\.h.*:#include <zaptel.h>:" \
+			qozap/qozap.c \
+			zaphfc/zaphfc.c \
+			cwain/cwain.c
+
+		# patch makefiles
+		sed -i  -e "s:^ZAP[\t ]*=.*:ZAP=-I${S}:" \
+			-e "s:^MODCONF=.*:MODCONF=/etc/modules.d/zaptel:" \
+			-e "s:linux-2.6:linux:g" \
+			qozap/Makefile \
+			zaphfc/Makefile \
+			cwain/Makefile
+
+		sed -i  -e "s:^\(CFLAGS+=-I. \).*:\1 \$(ZAP):" \
+			zaphfc/Makefile
+	fi
+
+	# replace `uname -r` with ${KV_FULL} in all Makefiles
+	find ${WORKDIR} -iname "Makefile" -exec sed -i -e "s:\`uname -r\`:${KV_FULL}:g" {} \;
+}
+
+src_compile() {
+	# TODO: bristuff modules
+
+	set_arch_to_kernel
+	make KERNEL_SOURCE=/usr/src/linux || die
+
+	if use bri; then
+		cd ${WORKDIR}/bristuff-${BRI_VERSION}
+		make -C qozap  || die
+		make -C zaphfc || die
+		make -C cwain  || die
+	fi
+	set_arch_to_portage
+}
+
+src_install() {
+	make INSTALL_PREFIX=${D} install || die
+
+	dodoc ChangeLog README README.udev README.Linux26 README.fxsusb zaptel.init
+	dodoc zaptel.conf.sample LICENSE zaptel.sysconfig
+
+	# additional tools
+	dobin ztmonitor ztspeed zttest
+
+	if use bri; then
+		einfo "Installing bri"
+		cd ${WORKDIR}/bristuff-${BRI_VERSION}
+
+		insinto /lib/modules/${KV_FULL}/misc
+		doins qozap/qozap.${KV_OBJ}
+		doins zaphfc/zaphfc.${KV_OBJ}
+		doins cwain/cwain.${KV_OBJ}
+
+		# install example configs for octoBRI and quadBRI
+		insinto /etc
+		doins qozap/zaptel.conf.octoBRI
+		newins qozap/zaptel.conf zaptel.conf.quadBRI
+		newins zaphfc/zaptel.conf zaptel.conf.zaphfc
+
+		insinto /etc/asterisk
+		doins qozap/zapata.conf.octoBRI
+		newins qozap/zapata.conf zapata.conf.quadBRI
+		newins zaphfc/zapata.conf zapata.conf.zaphfc
+
+		docinto bristuff
+		dodoc CHANGES INSTALL
+
+		docinto bristuff/qozap
+		dodoc qozap/LICENSE qozap/TODO qozap/*.conf*
+
+		docinto bristuff/zaphfc
+		dodoc zaphfc/LICENSE zaphfc/*.conf
+
+		docinto bristuff/cwain
+		dodoc cwain/TODO cwain/LICENSE
+	fi
+
+	# install init script
+	newinitd ${FILESDIR}/zaptel.rc6 zaptel
+	newconfd ${FILESDIR}/zaptel.confd zaptel
+
+	# install devfsd rule file
+	insinto /etc/devfs.d
+	newins ${FILESDIR}/zaptel.devfsd zaptel
+
+	# install udev rule file
+	insinto /etc/udev/rules.d
+	newins ${FILESDIR}/zaptel.udevd 10-zaptel.rules
+
+	# fix permissions if there's no udev / devfs around
+	if [[ -d ${D}/dev/zap ]]; then
+		chown -R root:dialout	${D}/dev/zap
+		chmod -R u=rwX,g=rwX,o= ${D}/dev/zap
+	fi
+}
+
+pkg_postinst() {
+	linux-mod_pkg_postinst
+
+	if use devfs26; then
+		ewarn "*** Warning! ***"
+		ewarn "Devfs support for linux-2.6 is experimental and not"
+		ewarn "supported by digium or the asterisk project!"
+		echo
+		ewarn "Send bug-reports to: stkn@gentoo.org"
+	fi
+
+	echo
+	einfo "Use the /etc/init.d/zaptel script to load zaptel.conf settings on startup!"
+	echo
+
+	if use bri; then
+		einfo "Bristuff configs have been merged as:"
+		einfo ""
+		einfo "${ROOT}etc/"
+		einfo "    zaptel.conf.zaphfc"
+		einfo "    zaptel.conf.quadBRI"
+		einfo "    zaptel.conf.octoBRI"
+		einfo ""
+		einfo "${ROOT}etc/asterisk/"
+		einfo "    zapata.conf.zaphfc"
+		einfo "    zapata.conf.quadBRI"
+		einfo "    zapata.conf.octoBRI"
+		echo
+	fi
+
+	# fix permissions if there's no udev / devfs around
+	if [[ -d ${ROOT}/dev/zap ]]; then
+		chown -R root:dialout	${ROOT}/dev/zap
+		chmod -R u=rwX,g=rwX,o= ${ROOT}/dev/zap
+	fi
+}