new version out. FHS compliance and gcc-4.4 support

Package-Manager: portage-2.1.8.3/cvs/Linux x86_64

1 files changed, 289 insertions, 0 deletions

diff --git a/net-fs/coda/coda-6.9.5.ebuild b/net-fs/coda/coda-6.9.5.ebuild
new file mode 100644
index 000000000000..c3ae9550936e
--- /dev/null
+++ b/net-fs/coda/coda-6.9.5.ebuild
@@ -0,0 +1,289 @@
+# Copyright 1999-2010 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/net-fs/coda/coda-6.9.5.ebuild,v 1.1 2010/05/10 22:07:06 george Exp $
+
+inherit autotools eutils toolchain-funcs
+
+IUSE="client server coda_layout coda_symlinks kerberos"
+# client        : causes the coda client (venus) to be built.
+# server        : causes the coda server (vice) to be built.
+# coda_layout   : doesn't apply FHS compliancy patches. Use this if using any directory
+#     other than /coda for the mount point makes you upset.
+# coda_symlinks : create legacy symlinks if FHS layout is used.
+
+DESCRIPTION="Coda is an advanced networked filesystem developed at Carnegie Mellon Univ."
+HOMEPAGE="http://www.coda.cs.cmu.edu/"
+SRC_URI="http://www.coda.cs.cmu.edu/pub/coda/src/${P}.tar.gz"
+
+SLOT="0"
+LICENSE="GPL-2"
+KEYWORDS="~amd64 ~ppc ~x86"
+
+# partly based on the deps suggested by Mandrake's RPM, and/or on my current versions
+# Also, definely needs coda.h from linux-headers.
+RDEPEND=">=sys-libs/lwp-2.1
+	>=net-libs/rpc2-2.6
+	>=sys-libs/rvm-1.15
+	>=sys-libs/db-3
+	>=sys-libs/ncurses-4
+	>=sys-libs/readline-3
+	>=dev-lang/perl-5.8
+	kerberos? ( virtual/krb5 )"
+
+DEPEND="${RDEPEND}
+	sys-apps/gawk
+	sys-devel/bison
+	sys-apps/grep
+	virtual/os-headers"
+
+pkg_setup() {
+	echo
+	einfo "gcc-version = $(gcc-version)"
+	echo
+
+	if ! use client && ! use server; then
+		eerror "Neither client nor server is enabled."
+		eerror "Please enable at least one of these flags!"
+		die "at  least one of client or server flags should be on!"
+	fi
+
+	if use coda_layout; then
+		einfo
+		ewarn "You selected coda (legacy) layout."
+		ewarn "Please note, that coda itself have transitioned to more FHS"
+		ewarn "compilant layout starting with version 6.9.5. Although not all"
+		ewarn "internal paths seem to have been updated."
+		ewarn "Use with care!"
+		einfo
+		ewarn "In case you are updating existing installation it is"
+		ewarn "recommended to keep old layout in conf files or perform a clean"
+		ewarn "transition - copying data externally to fresh version."
+		einfo
+		sleep 5
+	fi
+}
+
+src_unpack() {
+	unpack ${A}
+
+	cd "${S}"
+	tar xjpf "${FILESDIR}"/scripts.tar.bz2
+	epatch "${FILESDIR}"/fixdeps.patch
+	epatch "${FILESDIR}"/vice-setup.in.patch
+
+	if ! use coda_layout; then
+		einfo "seding sources.."
+		# First, some common substitutions.
+		# As this is a rather critical subsystem and screwing paths can break
+		# user's data, protect all seds by die.
+		#
+		# NOTE: gentoo  specific init scripts installed as a part of unpack ${A}
+		# have some paths specified inside. However these will be autoupdated by
+		# below seds for free, no need for special care.
+		#
+		# first, special cases under /usr/coda
+		# for spool, look only in subdirs, as we do not want to touch ChangeLog
+		grep -rl "/usr/coda/spool" "${S}"/*/* | xargs \
+			sed -i -e "s:/usr/coda/spool:/var/spool/coda:" \
+			|| die "setting FHS compliant paths failed"
+
+		# coda/etc used to contain vstab file, which normally would reside in
+		# /etc/coda. However this file was deprecated, so no special handling..
+		# do only subdirs here too.
+		grep -rl "/usr/coda/etc" "${S}"/*/*   | xargs \
+			sed -i -e "s:/usr/coda/etc:/var/log/coda:" \
+			|| die "setting FHS compliant paths failed"
+
+		# stuff uder venus.cache need special care
+		# "real cache" goues under /var/cache and pid related files under
+		# /var/run
+		grep -rl "cachedir=/usr/coda/venus.cache" "${S}"/* | xargs \
+			sed -i -e "s:cachedir=/usr/coda/venus.cache:cachedir=/var/cache/coda:" \
+			|| die "setting FHS compliant paths failed"
+		sed -i -e "s:DFLT_CD \"/usr/coda/venus.cache\":DFLT_CD \"/var/cache/coda\":" \
+			"${S}"/coda-src/venus/venus.private.h || die "seding venus.private.h failed"
+		grep -rl "/usr/coda/venus.cache" "${S}"/* | xargs \
+			sed -i -e "s:/usr/coda/venus.cache:/var/run/coda:" \
+			|| die "setting FHS compliant paths failed"
+
+		# what's left in /usr/coda goes to /var/lib/coda
+		# NOTE: dumplits.5 man page seems unduly touched by this sed, ignoring
+		# for now..
+		grep -rl "/usr/coda" "${S}"/*/*   | xargs \
+			sed -i -e "s:/usr/coda:/var/lib/coda:" \
+			|| die "setting FHS compliant paths failed"
+
+		# move /coda to /mnt/coda
+		grep -rle "[[:space:]\"=]/coda" "${S}"/*/*   | xargs \
+			sed -i -e "s:\([[:space:]\"=]\)/coda:\1/mnt/coda:" \
+			|| die "setting FHS compliant paths failed"
+
+		# move /vice and /vicepX under /var/lib/coda/
+		grep -rle "[[:space:]\"=\[]/vice" "${S}"/*/*   | xargs \
+			sed -i -e "s:\([[:space:]\"=\[]\)/vice:\1/var/lib/coda/vice:g" \
+			|| die "setting FHS compliant paths failed"
+	fi
+
+	eautoreconf
+}
+
+my_build_venus_prereqs() {
+	# Coda uses a recursive make with some directories depending
+	# on objects built in other directories, so run make inside
+	# the prerequisite dirs first. This builds everything required
+	# by venus in the order listed in coda-src/Makefile.am.
+
+	cd "${S}/lib-src"
+	emake || die "emake failed"
+
+	# auth2 depends on kerndep
+	cd "${S}/coda-src/kerndep"
+	emake || die "emake failed"
+
+	# auth2 depends on util.
+	cd "${S}/coda-src/util"
+	emake || die "emake failed"
+
+	# librepair depends on vicedep
+	cd "${S}/coda-src/vicedep"
+	emake || die "emake failed"
+
+	# venus depends on dir
+	cd "${S}/coda-src/dir"
+	emake || die "emake failed"
+
+	# venus depends on al
+	cd "${S}/coda-src/al"
+	emake || die "emake failed"
+
+	# librepair depends on auth2
+	cd "${S}/coda-src/auth2"
+	emake || die "emake failed"
+
+	# venus depends on vv
+	cd "${S}/coda-src/vv"
+	emake || die "emake failed"
+
+	# venus depends on lka
+	cd "${S}/coda-src/lka"
+	emake || die "emake failed"
+
+	# venus depends on vol
+	cd "${S}/coda-src/vol"
+	emake || die "emake failed"
+
+	# venus depends on librepair
+	cd "${S}/coda-src/librepair"
+	emake || die "emake failed"
+}
+
+src_compile() {
+	local myflags=""
+
+	# Coda uses type punning in a way that violates assumptions made by -O2
+	# and friends (via -fstrict-aliasing). Disable this optimization where
+	# required.
+	local my_safe_cflags="${CFLAGS} -fno-strict-aliasing"
+	local my_safe_cxxflags="${CXXFLAGS} -fno-strict-aliasing"
+
+	# Include the server/client code.
+	use client && myflags="${myflags} --enable-client"
+	use server && myflags="${myflags} --enable-server"
+
+	# Enable kerboeros?
+	if use kerberos; then
+		myflags="${myflags} --with-crypto --with-krb5"
+		myflags="${myflags} --with-krb5-includes=/usr/include/krb5"
+		myflags="${myflags} --with-krb5-libs=/usr/lib"
+	fi
+
+	# Perform the actual configure.
+	econf ${myflags} || die "configure failed"
+
+	# Build any prerequisites for venus.
+	my_build_venus_prereqs
+
+	# Venus uses unsafe type punning, so disable
+	# some optimizations for venus.
+	pushd coda-src/venus
+	emake \
+		CFLAGS="${my_safe_cflags}" \
+		CXXFLAGS="${my_safe_cxxflags}" \
+		|| die "emake failed"
+	popd
+
+	# Now run make in the source directory to finish the compile.
+	emake -j1 || die "emake failed"
+}
+
+src_install () {
+	emake DESTDIR="${D}" install
+
+	dodoc INSTALL* README* NEWS ChangeLog AUTHORS
+
+	use server && doinitd coda-src/scripts/codasrv
+	use client && doinitd coda-src/scripts/venus
+
+	# Fix conflict with backup.sh from tar
+	mv -f "${D}"/usr/sbin/backup{,-coda}.sh
+
+	if use coda_layout; then
+		# Create coda specific layout
+		dodir /usr/coda
+		dodir /usr/coda/etc
+		dodir /usr/coda/spool
+		if use server; then
+			dodir /vice
+			dodir /vicepa
+		fi
+		if use client; then
+			dodir /coda
+			diropts -m0700
+			dodir /usr/coda/venus.cache
+		fi
+	else
+		# Create FHS compliant layout
+		dodir /var/lib/coda
+		dodir /var/log/coda
+		dodir /var/spool/coda
+
+		if use server; then
+			dodir /var/lib/coda/vice
+			dodir /var/lib/coda/vicepa
+		fi
+
+		if use client; then
+			dodir /mnt/coda
+			dosym mnt/coda /coda
+			diropts -m0700
+			dodir /var/cache/coda
+		fi
+
+		if use coda_symlinks; then
+			# Symlink traditional coda dirs to gentoo dirs.
+			# NOTE: /coda symlink is unconditional for compatibility of client apps
+			dosym ../var/lib/coda /usr/coda
+			if use server; then
+				dosym var/lib/coda/vice /vice
+				dosym var/lib/coda/vicepa /vicepa
+			fi
+		fi
+	fi
+}
+
+pkg_preinst () {
+	enewgroup codaroot
+	enewuser codaroot -1 -1 -1 codaroot
+}
+
+pkg_postinst () {
+	einfo
+	elog "To enable the coda server at boot up, please do:"
+	elog "    rc-update add codasrv default"
+	elog
+	elog "To enable the coda client at boot up, do:"
+	elog "    rc-update add venus default"
+	elog
+	elog "To get started, run vice-setup and/or venus-setup."
+	einfo
+}