add perl scripts under USE=perl so it pulls in the perl depends

Package-Manager: portage-2.1.4

1 files changed, 145 insertions, 0 deletions

diff --git a/media-tv/ivtv/ivtv-1.0.3-r2.ebuild b/media-tv/ivtv/ivtv-1.0.3-r2.ebuild
new file mode 100644
index 000000000000..4d6330efe08e
--- /dev/null
+++ b/media-tv/ivtv/ivtv-1.0.3-r2.ebuild
@@ -0,0 +1,145 @@
+# Copyright 1999-2008 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/media-tv/ivtv/ivtv-1.0.3-r2.ebuild,v 1.1 2008/01/14 22:04:09 cardoe Exp $
+
+inherit eutils linux-mod
+
+DESCRIPTION="ivtv driver for Hauppauge PVR PCI cards"
+HOMEPAGE="http://www.ivtvdriver.org"
+SRC_URI="http://dl.ivtvdriver.org/ivtv/archive/1.0.x/${P}.tar.gz"
+SLOT="0"
+LICENSE="GPL-2"
+KEYWORDS="~amd64 ~ppc ~x86"
+IUSE="fbcon perl"
+RDEPEND="|| ( >=sys-fs/udev-103 sys-apps/hotplug )"
+DEPEND="app-arch/unzip"
+PDEPEND="=media-tv/pvr-firmware-20070217
+	perl? (
+		dev-perl/Video-Frequencies
+		dev-perl/Video-ivtv
+		dev-perl/Config-IniFiles
+		virtual/perl-Getopt-Long
+		dev-perl/perl-tk )"
+
+pkg_setup() {
+
+	MODULE_NAMES="saa717x(extra:${S}/i2c-drivers)"
+	BUILD_TARGETS="all"
+	CONFIG_CHECK="EXPERIMENTAL KMOD HAS_IOMEM FW_LOADER I2C I2C_ALGOBIT
+		VIDEO_DEV VIDEO_CAPTURE_DRIVERS VIDEO_V4L1 VIDEO_V4L2
+		!VIDEO_HELPER_CHIPS_AUTO VIDEO_IVTV"
+
+	if use fbcon; then
+		MODULE_NAMES="${MODULE_NAMES} ivtvfb(extra:${S}/driver)"
+		CONFIG_CHECK="${CONFIG_CHECK} FB FB_TRIDENT FRAMEBUFFER_CONSOLE FONTS"
+	fi
+
+	if ! ( kernel_is 2 6 22 || kernel_is 2 6 23 ); then
+		eerror "Each IVTV driver branch will only work with a specific"
+		eerror "linux kernel branch."
+		eerror ""
+		eerror "You will need to either:"
+		eerror "a) emerge a different kernel"
+		eerror "b) emerge a different ivtv driver"
+		eerror ""
+		eerror "See http://ivtvdriver.org/ for more information"
+		die "This only works on 2.6.22 and greater kernels"
+	fi
+
+	if use fbcon; then
+		ewarn ""
+		ewarn "From the README regarding framebuffer support:"
+		ewarn ""
+		ewarn "ivtvfb now requires that you enable the following kernel config"
+		ewarn "options: Go to 'Device drivers -> Graphics support'. Enable"
+		ewarn "'Support for frame buffer devices'. Enable 'Trident support'"
+		ewarn "(the Trident module itself is not required)."
+		ewarn ""
+		ewarn "To get working console output, keep going to 'Console display"
+		ewarn "driver support', and enable 'Framebuffer Console support'."
+		ewarn "Enable 'Select compiled-in fonts' & once that's done, you should"
+		ewarn "have a list of fonts. Choose one. With the default OSD size,"
+		ewarn "'VGA 8x16' gives 80x30(PAL) 80x25(NTSC)."
+		ewarn ""
+		ewarn "This ebuild checks for all the correct kernel config options for"
+		ewarn "framebuffer use with the exception of choosing a font.  Be sure"
+		ewarn "to pick one yourself!"
+		ewarn ""
+	fi
+
+	ewarn ""
+	ewarn "Make sure that your I2C and V4L kernel drivers are loaded as"
+	ewarn "modules, and not compiled into the kernel, or IVTV will not"
+	ewarn "work."
+	ewarn ""
+
+	linux-mod_pkg_setup
+
+	BUILD_PARAMS="KDIR=${KV_DIR}"
+}
+
+src_compile() {
+
+	cd "${S}/driver"
+	linux-mod_src_compile || die "failed to build driver"
+
+	cd "${S}/utils"
+	emake INCDIR="${KV_DIR}/include" || die "failed to build utils "
+}
+
+src_install() {
+	cd "${S}/utils"
+	make DESTDIR="${D}" PREFIX="/usr" install || die "failed to install utils"
+	use perl && dobin perl/*.pl
+
+	cd "${S}"
+	dodoc README* doc/* ChangeLog*
+	use perl && dodoc utils/perl/README.ptune
+
+	cd "${S}/driver"
+	linux-mod_src_install || die "failed to install modules"
+}
+
+pkg_postinst() {
+
+	linux-mod_pkg_postinst
+
+	elog ""
+	elog "This version of the IVTV driver supports the following hardware:"
+	elog "Hauppauge WinTV PVR-250"
+	elog "Hauppauge WinTV PVR-350"
+	elog "Hauppauge WinTV PVR-150"
+	elog "Hauppauge WinTV PVR-500"
+	elog "AVerMedia M179"
+	elog "Yuan MPG600/Kuroutoshikou iTVC16-STVLP"
+	elog "Yuan MPG160/Kuroutoshikou iTVC15-STVLP"
+	elog "Yuan PG600/DiamondMM PVR-550 (CX Falcon 2)"
+	elog "Adaptec AVC-2410"
+	elog "Adaptec AVC-2010"
+	elog "Nagase Transgear 5000TV"
+	elog "AOpen VA2000MAX-STN6"
+	elog "Yuan MPG600GR/Kuroutoshikou CX23416GYC-STVLP"
+	elog "I/O Data GV-MVP/RX"
+	elog "I/O Data GV-MVP/RX2E"
+	elog "Gotview PCI DVD (preliminary support only)"
+	elog "Gotview PCI DVD2 Deluxe"
+	elog "Yuan MPC622"
+	elog ""
+	ewarn ""
+	ewarn "IMPORTANT: In case of problems first read this page:"
+	ewarn "http://www.ivtvdriver.org/index.php/Troubleshooting"
+	ewarn ""
+	ewarn "If any of these conditions match your setup, you may want to look at the"
+	ewarn "README in /usr/share/doc/${PF}/"
+	ewarn ""
+	ewarn " - Using MythTV, a PVR-350 and the ivtvfb module"
+	ewarn " - Using the ivtv X driver and the ivtvfb module"
+	ewarn " - You want to manually build ivtv against v4l-dvb"
+	ewarn ""
+	ewarn "Also, the ivtv package comes with lots of documentation regarding setup,"
+	ewarn "proper use and debugging utilities."
+	ewarn "They are also located in /usr/share/doc/${PF}/"
+	ewarn ""
+	ewarn "For more information, see the IVTV driver homepage at:"
+	ewarn "http://www.ivtvdriver.org/"
+}