sys-power/apcupsd: Bump to version 3.14.13

Package-Manager: portage-2.2.26
Signed-off-by: Lars Wendler <polynomial-c@gentoo.org>

1 files changed, 139 insertions, 0 deletions

diff --git a/sys-power/apcupsd/apcupsd-3.14.13.ebuild b/sys-power/apcupsd/apcupsd-3.14.13.ebuild
new file mode 100644
index 000000000000..ce3e408365ff
--- /dev/null
+++ b/sys-power/apcupsd/apcupsd-3.14.13.ebuild
@@ -0,0 +1,139 @@
+# Copyright 1999-2015 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Id$
+
+EAPI=5
+
+inherit eutils linux-info flag-o-matic systemd udev
+
+DESCRIPTION="APC UPS daemon with integrated tcp/ip remote shutdown"
+HOMEPAGE="http://www.apcupsd.org/"
+SRC_URI="mirror://sourceforge/apcupsd/${P}.tar.gz"
+
+LICENSE="GPL-2"
+SLOT="0"
+KEYWORDS="~amd64 ~arm ~ppc ~x86 ~x86-fbsd"
+IUSE="snmp +usb cgi nls gnome kernel_linux"
+
+DEPEND="
+	||	( >=sys-apps/util-linux-2.23[tty-helpers(-)]
+		  <=sys-apps/sysvinit-2.88-r4
+		  sys-freebsd/freebsd-ubin
+		)
+	cgi? ( >=media-libs/gd-1.8.4 )
+	nls? ( sys-devel/gettext )
+	snmp? ( >=net-analyzer/net-snmp-5.7.2 )
+	gnome? ( >=x11-libs/gtk+-2.4.0:2
+		dev-libs/glib:2
+		>=gnome-base/gconf-2.0 )"
+RDEPEND="${DEPEND}
+	sys-apps/openrc
+	virtual/mailx"
+
+CONFIG_CHECK="~USB_HIDDEV ~HIDRAW"
+ERROR_USB_HIDDEV="CONFIG_USB_HIDDEV:	needed to access USB-attached UPSes"
+ERROR_HIDRAW="CONFIG_HIDRAW:		needed to access USB-attached UPSes"
+
+pkg_setup() {
+	if use kernel_linux && use usb && linux_config_exists; then
+		check_extra_config
+	fi
+}
+
+src_prepare() {
+	epatch "${FILESDIR}/${PN}-3.14.9-aliasing.patch"
+}
+
+src_configure() {
+	local myconf
+	use cgi && myconf="${myconf} --enable-cgi --with-cgi-bin=/usr/libexec/${PN}/cgi-bin"
+	if use usb; then
+		myconf="${myconf} --with-upstype=usb --with-upscable=usb --enable-usb --with-dev= "
+	else
+		myconf="${myconf} --with-upstype=apcsmart --with-upscable=smart --disable-usb"
+	fi
+
+	# We force the DISTNAME to gentoo so it will use gentoo's layout also
+	# when installed on non-linux systems.
+	econf \
+		--sbindir=/sbin \
+		--sysconfdir=/etc/apcupsd \
+		--with-pwrfail-dir=/etc/apcupsd \
+		--with-lock-dir=/run/apcupsd \
+		--with-pid-dir=/run/apcupsd \
+		--with-log-dir=/var/log \
+		--with-nis-port=3551 \
+		--enable-net --enable-pcnet \
+		--with-distname=gentoo \
+		$(use_enable snmp net-snmp) \
+		$(use_enable gnome gapcmon) \
+		${myconf} \
+		APCUPSD_MAIL=/bin/mail
+}
+
+src_compile() {
+	# Workaround for bug #280674; upstream should really just provide
+	# the text files in the distribution, but I wouldn't count on them
+	# doing that anytime soon.
+	MANPAGER=$(type -p cat) \
+		emake || die "emake failed"
+}
+
+src_install() {
+	emake DESTDIR="${D}" install
+	rm -f "${D}"/etc/init.d/halt
+
+	insinto /etc/apcupsd
+	newins examples/safe.apccontrol safe.apccontrol
+	doins "${FILESDIR}"/apcupsd.conf
+
+	dodoc ChangeLog* ReleaseNotes
+	doman doc/*.8 doc/*.5
+
+	dohtml -r doc/manual/*
+
+	rm "${D}"/etc/init.d/apcupsd
+	newinitd "${FILESDIR}/${PN}.init.4" "${PN}"
+	newinitd "${FILESDIR}/${PN}.powerfail.init" "${PN}".powerfail
+
+	systemd_dounit "${FILESDIR}"/${PN}.service
+	systemd_dotmpfilesd "${FILESDIR}"/${PN}-tmpfiles.conf
+
+	# remove hal settings, we don't really want to have it around still.
+	rm -r "${D}"/usr/share/hal
+
+	# replace it with our udev rules if we're in Linux
+	if use kernel_linux; then
+		udev_newrules "${FILESDIR}"/apcupsd-udev.rules 60-${PN}.rules
+	fi
+
+}
+
+pkg_postinst() {
+	if use cgi; then
+		elog "The cgi-bin directory for ${PN} is /usr/libexec/${PN}/cgi-bin."
+		elog "Set up your ScriptAlias or symbolic links accordingly."
+	fi
+
+	elog ""
+	elog "Since version 3.14.0 you can use multiple apcupsd instances to"
+	elog "control more than one UPS in a single box with openRC."
+	elog "To do this, create a link between /etc/init.d/apcupsd to a new"
+	elog "/etc/init.d/apcupsd.something, and it will then load the"
+	elog "configuration file at /etc/apcupsd/something.conf."
+	elog ""
+
+	elog 'If you want apcupsd to power off your UPS when it'
+	elog 'shuts down your system in a power failure, you must'
+	elog 'add apcupsd.powerfail to your shutdown runlevel:'
+	elog ''
+	elog ' \e[01m rc-update add apcupsd.powerfail shutdown \e[0m'
+	elog ''
+
+	if use kernel_linux; then
+		elog "Starting from version 3.14.9-r1, ${PN} installs udev rules"
+		elog "for persistent device naming. If you have multiple UPS"
+		elog "connected to the machine, you can point them to the devices"
+		elog "in /dev/apcups/by-id directory."
+	fi
+}