net-wireless/hostapd: add new version 2.8

Package-Manager: Portage-2.3.62, Repoman-2.3.12
Signed-off-by: Andrey Utkin <andrey_utkin@gentoo.org>

2 files changed, 263 insertions, 0 deletions

diff --git a/net-wireless/hostapd/Manifest b/net-wireless/hostapd/Manifest
index f18f59bcb9b8..8224998b89c3 100644
--- a/net-wireless/hostapd/Manifest
+++ b/net-wireless/hostapd/Manifest
@@ -1,2 +1,3 @@
 DIST hostapd-2.7.tar.gz 2101166 BLAKE2B 4e88b7f0d2c57a02edf4214bb35efa08e87a2cbdac4eda9934a40b09f8c046da6cca1250fe5714cb403eb81739bd99e04ea5a9fad62e47bcee4d72106170905d SHA512 1c9a210dfffb951fb667be19aa44ad8c66dccd2aed26cdab939185923550e3c1998a678ebe6975e560e1b3385bff2098f1b2cb773452ba66fb35246fdd3eb2c1
+DIST hostapd-2.8.tar.gz 2169018 BLAKE2B 29e331d8ebb52732d2548734fe9ea55d8401826da7a35962705335da7d81232c785ffa89d77e8ee848148d82bea1d9141cc4d515706eebacb267754829cf7ed6 SHA512 5a352517470912bcb87755a592238eac2d814a7089d4ba1ecb7969f172dbb746a4e9a6c0d47c0d7c4a6a86b04b14ac39147d729fdf3163371c1067490a4897aa
 DIST net-wireless_hostapd_2.7-r2_extras.tar.xz 1820 BLAKE2B 5c4daf0e4fcf5ae0803cdbe2aabcc75e89b1e92048e8a01894d73639a16b049174b37eca6b6206c337a2874a6e6d5588d50fa5b8a4813e7f6c22bf02efca852f SHA512 65bc4634c8314280ceab44d1f5d6d62092f4bca48253f107b076211020f6f6502388490aee907f9910846a25ba2da7e4122bdb1873eb2b12bf94e867e3295f4c
diff --git a/net-wireless/hostapd/hostapd-2.8.ebuild b/net-wireless/hostapd/hostapd-2.8.ebuild
new file mode 100644
index 000000000000..382256f224b1
--- /dev/null
+++ b/net-wireless/hostapd/hostapd-2.8.ebuild
@@ -0,0 +1,262 @@
+# Copyright 1999-2019 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI="6"
+
+inherit toolchain-funcs systemd savedconfig
+
+DESCRIPTION="IEEE 802.11 wireless LAN Host AP daemon"
+HOMEPAGE="http://w1.fi"
+EXTRAS_VER="2.7-r2"
+EXTRAS_NAME="${CATEGORY}_${PN}_${EXTRAS_VER}_extras"
+SRC_URI="https://dev.gentoo.org/~andrey_utkin/distfiles/${EXTRAS_NAME}.tar.xz"
+
+if [[ $PV == 9999 ]]; then
+	inherit git-r3
+	EGIT_REPO_URI="https://w1.fi/hostap.git"
+else
+	if [[ $PV =~ ^.*_p[0-9]{8}$ ]]; then
+		SRC_URI+=" https://dev.gentoo.org/~andrey_utkin/distfiles/${P}.tar.xz"
+	else
+		SRC_URI+=" https://w1.fi/releases/${P}.tar.gz"
+	fi
+	# Never stabilize snapshot ebuilds please
+	KEYWORDS="~amd64 ~arm ~arm64 ~mips ~ppc ~x86"
+fi
+
+LICENSE="BSD"
+SLOT="0"
+IUSE="internal-tls ipv6 libressl logwatch netlink sqlite +wps +crda"
+
+DEPEND="
+	libressl? ( dev-libs/libressl:0= )
+	!libressl? (
+		internal-tls? ( dev-libs/libtommath )
+		!internal-tls? ( dev-libs/openssl:0=[-bindist] )
+	)
+	kernel_linux? (
+		dev-libs/libnl:3
+		crda? ( net-wireless/crda )
+	)
+	netlink? ( net-libs/libnfnetlink )
+	sqlite? ( >=dev-db/sqlite-3 )"
+
+RDEPEND="${DEPEND}"
+
+S="${S}/${PN}"
+
+pkg_pretend() {
+	if use internal-tls; then
+		if use libressl; then
+			elog "libressl flag takes precedence over internal-tls"
+		else
+			ewarn "internal-tls implementation is experimental and provides fewer features"
+		fi
+	fi
+}
+
+src_unpack() {
+	# Override default one because we need the SRC_URI ones even in case of 9999 ebuilds
+	default
+	if [[ ${PV} == 9999 ]] ; then
+		git-r3_src_unpack
+	fi
+}
+
+src_prepare() {
+	# Allow users to apply patches to src/drivers for example,
+	# i.e. anything outside ${S}/${PN}
+	pushd ../ >/dev/null || die
+	default
+	popd >/dev/null || die
+
+	sed -i -e "s:/etc/hostapd:/etc/hostapd/hostapd:g" \
+		"${S}/hostapd.conf" || die
+}
+
+src_configure() {
+	local CONFIG="${S}/.config"
+
+	restore_config "${CONFIG}"
+	if [[ -f "${CONFIG}" ]]; then
+		default_src_configure
+		return 0
+	fi
+
+	# toolchain setup
+	echo "CC = $(tc-getCC)" > ${CONFIG}
+
+	# EAP authentication methods
+	echo "CONFIG_EAP=y" >> ${CONFIG}
+	echo "CONFIG_ERP=y" >> ${CONFIG}
+	echo "CONFIG_EAP_MD5=y" >> ${CONFIG}
+
+	if use internal-tls && ! use libressl; then
+		echo "CONFIG_TLS=internal" >> ${CONFIG}
+	else
+		# SSL authentication methods
+		echo "CONFIG_EAP_FAST=y" >> ${CONFIG}
+		echo "CONFIG_EAP_TLS=y" >> ${CONFIG}
+		echo "CONFIG_EAP_TTLS=y" >> ${CONFIG}
+		echo "CONFIG_EAP_MSCHAPV2=y" >> ${CONFIG}
+		echo "CONFIG_EAP_PEAP=y" >> ${CONFIG}
+		echo "CONFIG_TLSV11=y" >> ${CONFIG}
+		echo "CONFIG_TLSV12=y" >> ${CONFIG}
+		echo "CONFIG_EAP_PWD=y" >> ${CONFIG}
+	fi
+
+	if use wps; then
+		# Enable Wi-Fi Protected Setup
+		echo "CONFIG_WPS=y" >> ${CONFIG}
+		echo "CONFIG_WPS2=y" >> ${CONFIG}
+		echo "CONFIG_WPS_UPNP=y" >> ${CONFIG}
+		echo "CONFIG_WPS_NFC=y" >> ${CONFIG}
+		einfo "Enabling Wi-Fi Protected Setup support"
+	fi
+
+	echo "CONFIG_EAP_IKEV2=y" >> ${CONFIG}
+	echo "CONFIG_EAP_TNC=y" >> ${CONFIG}
+	echo "CONFIG_EAP_GTC=y" >> ${CONFIG}
+	echo "CONFIG_EAP_SIM=y" >> ${CONFIG}
+	echo "CONFIG_EAP_AKA=y" >> ${CONFIG}
+	echo "CONFIG_EAP_AKA_PRIME=y" >> ${CONFIG}
+	echo "CONFIG_EAP_EKE=y" >> ${CONFIG}
+	echo "CONFIG_EAP_PAX=y" >> ${CONFIG}
+	echo "CONFIG_EAP_PSK=y" >> ${CONFIG}
+	echo "CONFIG_EAP_SAKE=y" >> ${CONFIG}
+	echo "CONFIG_EAP_GPSK=y" >> ${CONFIG}
+	echo "CONFIG_EAP_GPSK_SHA256=y" >> ${CONFIG}
+
+	einfo "Enabling drivers: "
+
+	# drivers
+	echo "CONFIG_DRIVER_HOSTAP=y" >> ${CONFIG}
+	einfo "  HostAP driver enabled"
+	echo "CONFIG_DRIVER_WIRED=y" >> ${CONFIG}
+	einfo "  Wired driver enabled"
+	echo "CONFIG_DRIVER_NONE=y" >> ${CONFIG}
+	einfo "  None driver enabled"
+
+	einfo "  nl80211 driver enabled"
+	echo "CONFIG_DRIVER_NL80211=y" >> ${CONFIG}
+
+	# epoll
+	echo "CONFIG_ELOOP_EPOLL=y" >> ${CONFIG}
+
+	# misc
+	echo "CONFIG_DEBUG_FILE=y" >> ${CONFIG}
+	echo "CONFIG_PKCS12=y" >> ${CONFIG}
+	echo "CONFIG_RADIUS_SERVER=y" >> ${CONFIG}
+	echo "CONFIG_IAPP=y" >> ${CONFIG}
+	echo "CONFIG_IEEE80211R=y" >> ${CONFIG}
+	echo "CONFIG_IEEE80211W=y" >> ${CONFIG}
+	echo "CONFIG_IEEE80211N=y" >> ${CONFIG}
+	echo "CONFIG_IEEE80211AC=y" >> ${CONFIG}
+	echo "CONFIG_PEERKEY=y" >> ${CONFIG}
+	echo "CONFIG_RSN_PREAUTH=y" >> ${CONFIG}
+	echo "CONFIG_INTERWORKING=y" >> ${CONFIG}
+	echo "CONFIG_FULL_DYNAMIC_VLAN=y" >> ${CONFIG}
+	echo "CONFIG_HS20=y" >> ${CONFIG}
+	echo "CONFIG_WNM=y" >> ${CONFIG}
+	echo "CONFIG_FST=y" >> ${CONFIG}
+	echo "CONFIG_FST_TEST=y" >> ${CONFIG}
+	echo "CONFIG_ACS=y" >> ${CONFIG}
+
+	if use netlink; then
+		# Netlink support
+		echo "CONFIG_VLAN_NETLINK=y" >> ${CONFIG}
+	fi
+
+	if use ipv6; then
+		# IPv6 support
+		echo "CONFIG_IPV6=y" >> ${CONFIG}
+	fi
+
+	if use sqlite; then
+		# Sqlite support
+		echo "CONFIG_SQLITE=y" >> ${CONFIG}
+	fi
+
+	# If we are using libnl 2.0 and above, enable support for it
+	# Removed for now, since the 3.2 version is broken, and we don't
+	# support it.
+	if has_version ">=dev-libs/libnl-3.2"; then
+		echo "CONFIG_LIBNL32=y" >> .config
+	fi
+
+	# TODO: Add support for BSD drivers
+
+	default_src_configure
+}
+
+src_compile() {
+	emake V=1
+
+	if use libressl || ! use internal-tls; then
+		emake V=1 nt_password_hash
+		emake V=1 hlr_auc_gw
+	fi
+}
+
+src_install() {
+	insinto /etc/${PN}
+	doins ${PN}.{conf,accept,deny,eap_user,radius_clients,sim_db,wpa_psk}
+
+	fperms -R 600 /etc/${PN}
+
+	dosbin ${PN}
+	dobin ${PN}_cli
+
+	if use libressl || ! use internal-tls; then
+		dobin nt_password_hash hlr_auc_gw
+	fi
+
+	newinitd "${WORKDIR}/${EXTRAS_NAME}"/${PN}-init.d ${PN}
+	newconfd "${WORKDIR}/${EXTRAS_NAME}"/${PN}-conf.d ${PN}
+	systemd_dounit "${WORKDIR}/${EXTRAS_NAME}"/${PN}.service
+
+	doman ${PN}{.8,_cli.1}
+
+	dodoc ChangeLog README
+	use wps && dodoc README-WPS
+
+	docinto examples
+	dodoc wired.conf
+
+	if use logwatch; then
+		insinto /etc/log.d/conf/services/
+		doins logwatch/${PN}.conf
+
+		exeinto /etc/log.d/scripts/services/
+		doexe logwatch/${PN}
+	fi
+
+	save_config .config
+}
+
+pkg_postinst() {
+	einfo
+	einfo "If you are running openRC you need to follow this instructions:"
+	einfo "In order to use ${PN} you need to set up your wireless card"
+	einfo "for master mode in /etc/conf.d/net and then start"
+	einfo "/etc/init.d/${PN}."
+	einfo
+	einfo "Example configuration:"
+	einfo
+	einfo "config_wlan0=( \"192.168.1.1/24\" )"
+	einfo "channel_wlan0=\"6\""
+	einfo "essid_wlan0=\"test\""
+	einfo "mode_wlan0=\"master\""
+	einfo
+	#if [ -e "${KV_DIR}"/net/mac80211 ]; then
+	#	einfo "This package now compiles against the headers installed by"
+	#	einfo "the kernel source for the mac80211 driver. You should "
+	#	einfo "re-emerge ${PN} after upgrading your kernel source."
+	#fi
+
+	if use wps; then
+		einfo "You have enabled Wi-Fi Protected Setup support, please"
+		einfo "read the README-WPS file in /usr/share/doc/${P}"
+		einfo "for info on how to use WPS"
+	fi
+}