Remove mips aout, coff, and pe support

include/coff/mips.h needs to stay for ecoff debug support.

include/
	* coff/mipspe.h: Delete.
bfd/
	* Makefile.am: Remove mips aout, coff, and pe support.
	* config.bfd: Likewise.
	* configure.ac: Likewise.
	* targets.c: Likewise.
	* coff-mips.c: Delete
	* mipsbsd.c: Delete
	* pe-mips.c: Delete
	* pei-mips.c: Delete
	* Makefile.in: Regenerate.
	* configure: Regenerate.
	* po/SRC-POTFILES.in: Regenerate.

12 files changed, 33 insertions, 3210 deletions

diff --git a/bfd/ChangeLog b/bfd/ChangeLog
index b377bd3ead5..e72a2f675ce 100644
--- a/bfd/ChangeLog
+++ b/bfd/ChangeLog
@@ -1,3 +1,17 @@
+2018-04-18  Alan Modra  <amodra@gmail.com>
+
+	* Makefile.am: Remove mips aout and coff support.
+	* config.bfd: Likewise.
+	* configure.ac: Likewise.
+	* targets.c: Likewise.
+	* coff-mips.c: Delete
+	* mipsbsd.c: Delete
+	* pe-mips.c: Delete
+	* pei-mips.c: Delete
+	* Makefile.in: Regenerate.
+	* configure: Regenerate.
+	* po/SRC-POTFILES.in: Regenerate.
+
 2018-04-17  H.J. Lu  <hongjiu.lu@intel.com>
 
 	* elf32-i386.c (elf32_bed): Define before including
diff --git a/bfd/Makefile.am b/bfd/Makefile.am
index 2008e12dcb5..61bb0c0e10f 100644
--- a/bfd/Makefile.am
+++ b/bfd/Makefile.am
@@ -267,7 +267,6 @@ BFD32_BACKENDS = \
 	coff-arm.lo \
 	coff-go32.lo \
 	coff-i386.lo \
-	coff-mips.lo \
 	coff-rs6000.lo \
 	coff-sh.lo \
 	coff-stgo32.lo \
@@ -364,7 +363,6 @@ BFD32_BACKENDS = \
 	mach-o.lo \
 	mach-o-i386.lo \
 	mach-o-arm.lo \
-	mipsbsd.lo \
 	ns32knetbsd.lo \
 	pc532-mach.lo \
 	pdp11.lo \
@@ -372,7 +370,6 @@ BFD32_BACKENDS = \
 	pe-arm.lo \
 	pe-i386.lo \
 	pe-mcore.lo \
-	pe-mips.lo \
 	pe-ppc.lo \
 	pe-sh.lo \
 	pef.lo \
@@ -380,7 +377,6 @@ BFD32_BACKENDS = \
 	pei-arm.lo \
 	pei-i386.lo \
 	pei-mcore.lo \
-	pei-mips.lo \
 	pei-ppc.lo \
 	pei-sh.lo \
 	peigen.lo \
@@ -410,7 +406,6 @@ BFD32_BACKENDS_CFILES = \
 	coff-arm.c \
 	coff-go32.c \
 	coff-i386.c \
-	coff-mips.c \
 	coff-rs6000.c \
 	coff-sh.c \
 	coff-stgo32.c \
@@ -507,7 +502,6 @@ BFD32_BACKENDS_CFILES = \
 	mach-o.c \
 	mach-o-i386.c \
 	mach-o-arm.c \
-	mipsbsd.c \
 	ns32knetbsd.c \
 	pc532-mach.c \
 	pdp11.c \
@@ -515,7 +509,6 @@ BFD32_BACKENDS_CFILES = \
 	pe-arm.c \
 	pe-i386.c \
 	pe-mcore.c \
-	pe-mips.c \
 	pe-ppc.c \
 	pe-sh.c \
 	pef.c \
@@ -523,7 +516,6 @@ BFD32_BACKENDS_CFILES = \
 	pei-arm.c \
 	pei-i386.c \
 	pei-mcore.c \
-	pei-mips.c \
 	pei-ppc.c \
 	pei-sh.c \
 	plugin.c \
diff --git a/bfd/Makefile.in b/bfd/Makefile.in
index 6ac276e310f..5c42ce54698 100644
--- a/bfd/Makefile.in
+++ b/bfd/Makefile.in
@@ -601,7 +601,6 @@ BFD32_BACKENDS = \
 	coff-arm.lo \
 	coff-go32.lo \
 	coff-i386.lo \
-	coff-mips.lo \
 	coff-rs6000.lo \
 	coff-sh.lo \
 	coff-stgo32.lo \
@@ -698,7 +697,6 @@ BFD32_BACKENDS = \
 	mach-o.lo \
 	mach-o-i386.lo \
 	mach-o-arm.lo \
-	mipsbsd.lo \
 	ns32knetbsd.lo \
 	pc532-mach.lo \
 	pdp11.lo \
@@ -706,7 +704,6 @@ BFD32_BACKENDS = \
 	pe-arm.lo \
 	pe-i386.lo \
 	pe-mcore.lo \
-	pe-mips.lo \
 	pe-ppc.lo \
 	pe-sh.lo \
 	pef.lo \
@@ -714,7 +711,6 @@ BFD32_BACKENDS = \
 	pei-arm.lo \
 	pei-i386.lo \
 	pei-mcore.lo \
-	pei-mips.lo \
 	pei-ppc.lo \
 	pei-sh.lo \
 	peigen.lo \
@@ -744,7 +740,6 @@ BFD32_BACKENDS_CFILES = \
 	coff-arm.c \
 	coff-go32.c \
 	coff-i386.c \
-	coff-mips.c \
 	coff-rs6000.c \
 	coff-sh.c \
 	coff-stgo32.c \
@@ -841,7 +836,6 @@ BFD32_BACKENDS_CFILES = \
 	mach-o.c \
 	mach-o-i386.c \
 	mach-o-arm.c \
-	mipsbsd.c \
 	ns32knetbsd.c \
 	pc532-mach.c \
 	pdp11.c \
@@ -849,7 +843,6 @@ BFD32_BACKENDS_CFILES = \
 	pe-arm.c \
 	pe-i386.c \
 	pe-mcore.c \
-	pe-mips.c \
 	pe-ppc.c \
 	pe-sh.c \
 	pef.c \
@@ -857,7 +850,6 @@ BFD32_BACKENDS_CFILES = \
 	pei-arm.c \
 	pei-i386.c \
 	pei-mcore.c \
-	pei-mips.c \
 	pei-ppc.c \
 	pei-sh.c \
 	plugin.c \
@@ -1214,7 +1206,6 @@ distclean-compile:
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/coff-bfd.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/coff-go32.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/coff-i386.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/coff-mips.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/coff-rs6000.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/coff-sh.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/coff-stgo32.Plo@am__quote@
@@ -1434,7 +1425,6 @@ distclean-compile:
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mach-o-x86-64.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mach-o.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/merge.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mipsbsd.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mmo.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/netbsd-core.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ns32knetbsd.Plo@am__quote@
@@ -1446,7 +1436,6 @@ distclean-compile:
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pe-arm.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pe-i386.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pe-mcore.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pe-mips.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pe-ppc.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pe-sh.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pe-x86_64.Plo@am__quote@
@@ -1456,7 +1445,6 @@ distclean-compile:
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pei-i386.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pei-ia64.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pei-mcore.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pei-mips.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pei-ppc.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pei-sh.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pei-x86_64.Plo@am__quote@
diff --git a/bfd/coff-mips.c b/bfd/coff-mips.c
deleted file mode 100644
index 3a0163a256b..00000000000
--- a/bfd/coff-mips.c
+++ /dev/null
@@ -1,1597 +0,0 @@
-/* BFD back-end for MIPS Extended-Coff files.
-   Copyright (C) 1990-2018 Free Software Foundation, Inc.
-   Original version by Per Bothner.
-   Full support added by Ian Lance Taylor, ian@cygnus.com.
-
-   This file is part of BFD, the Binary File Descriptor library.
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 3 of the License, or
-   (at your option) any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston,
-   MA 02110-1301, USA.  */
-
-#include "sysdep.h"
-#include "bfd.h"
-#include "bfdlink.h"
-#include "libbfd.h"
-#include "coff/internal.h"
-#include "coff/sym.h"
-#include "coff/symconst.h"
-#include "coff/ecoff.h"
-#include "coff/mips.h"
-#include "libcoff.h"
-#include "libecoff.h"
-
-/* Prototypes for static functions.  */
-static bfd_reloc_status_type
-mips_generic_reloc
-  (bfd *, arelent *, asymbol *, void *, asection *, bfd *, char **);
-static bfd_reloc_status_type
-mips_refhi_reloc
-  (bfd *, arelent *, asymbol *, void *, asection *, bfd *, char **);
-static bfd_reloc_status_type
-mips_reflo_reloc
-  (bfd *, arelent *, asymbol *, void *, asection *, bfd *, char **);
-static bfd_reloc_status_type
-mips_gprel_reloc
-  (bfd *, arelent *, asymbol *, void *, asection *, bfd *, char **);
-
-
-/* ECOFF has COFF sections, but the debugging information is stored in
-   a completely different format.  ECOFF targets use some of the
-   swapping routines from coffswap.h, and some of the generic COFF
-   routines in coffgen.c, but, unlike the real COFF targets, do not
-   use coffcode.h itself.
-
-   Get the generic COFF swapping routines, except for the reloc,
-   symbol, and lineno ones.  Give them ECOFF names.  */
-#define MIPSECOFF
-#define NO_COFF_RELOCS
-#define NO_COFF_SYMBOLS
-#define NO_COFF_LINENOS
-#define coff_swap_filehdr_in  mips_ecoff_swap_filehdr_in
-#define coff_swap_filehdr_out mips_ecoff_swap_filehdr_out
-#define coff_swap_aouthdr_in  mips_ecoff_swap_aouthdr_in
-#define coff_swap_aouthdr_out mips_ecoff_swap_aouthdr_out
-#define coff_swap_scnhdr_in   mips_ecoff_swap_scnhdr_in
-#define coff_swap_scnhdr_out  mips_ecoff_swap_scnhdr_out
-
-#include "coffswap.h"
-
-/* Get the ECOFF swapping routines.  */
-#define ECOFF_32
-#include "ecoffswap.h"
-
-/* How to process the various relocs types.  */
-
-static reloc_howto_type mips_howto_table[] =
-{
-  /* Reloc type 0 is ignored.  The reloc reading code ensures that
-     this is a reference to the .abs section, which will cause
-     bfd_perform_relocation to do nothing.  */
-  HOWTO (MIPS_R_IGNORE,	/* type */
-	 0,			/* rightshift */
-	 0,			/* size (0 = byte, 1 = short, 2 = long) */
-	 8,			/* bitsize */
-	 FALSE,			/* pc_relative */
-	 0,			/* bitpos */
-	 complain_overflow_dont, /* complain_on_overflow */
-	 0,			/* special_function */
-	 "IGNORE",		/* name */
-	 FALSE,			/* partial_inplace */
-	 0,			/* src_mask */
-	 0,			/* dst_mask */
-	 FALSE),		/* pcrel_offset */
-
-  /* A 16 bit reference to a symbol, normally from a data section.  */
-  HOWTO (MIPS_R_REFHALF,	/* type */
-	 0,			/* rightshift */
-	 1,			/* size (0 = byte, 1 = short, 2 = long) */
-	 16,			/* bitsize */
-	 FALSE,			/* pc_relative */
-	 0,			/* bitpos */
-	 complain_overflow_bitfield, /* complain_on_overflow */
-	 mips_generic_reloc,	/* special_function */
-	 "REFHALF",		/* name */
-	 TRUE,			/* partial_inplace */
-	 0xffff,		/* src_mask */
-	 0xffff,		/* dst_mask */
-	 FALSE),		/* pcrel_offset */
-
-  /* A 32 bit reference to a symbol, normally from a data section.  */
-  HOWTO (MIPS_R_REFWORD,	/* type */
-	 0,			/* rightshift */
-	 2,			/* size (0 = byte, 1 = short, 2 = long) */
-	 32,			/* bitsize */
-	 FALSE,			/* pc_relative */
-	 0,			/* bitpos */
-	 complain_overflow_bitfield, /* complain_on_overflow */
-	 mips_generic_reloc,	/* special_function */
-	 "REFWORD",		/* name */
-	 TRUE,			/* partial_inplace */
-	 0xffffffff,		/* src_mask */
-	 0xffffffff,		/* dst_mask */
-	 FALSE),		/* pcrel_offset */
-
-  /* A 26 bit absolute jump address.  */
-  HOWTO (MIPS_R_JMPADDR,	/* type */
-	 2,			/* rightshift */
-	 2,			/* size (0 = byte, 1 = short, 2 = long) */
-	 26,			/* bitsize */
-	 FALSE,			/* pc_relative */
-	 0,			/* bitpos */
-	 complain_overflow_dont, /* complain_on_overflow */
-				/* This needs complex overflow
-				   detection, because the upper four
-				   bits must match the PC.  */
-	 mips_generic_reloc,	/* special_function */
-	 "JMPADDR",		/* name */
-	 TRUE,			/* partial_inplace */
-	 0x3ffffff,		/* src_mask */
-	 0x3ffffff,		/* dst_mask */
-	 FALSE),		/* pcrel_offset */
-
-  /* The high 16 bits of a symbol value.  Handled by the function
-     mips_refhi_reloc.  */
-  HOWTO (MIPS_R_REFHI,		/* type */
-	 16,			/* rightshift */
-	 2,			/* size (0 = byte, 1 = short, 2 = long) */
-	 16,			/* bitsize */
-	 FALSE,			/* pc_relative */
-	 0,			/* bitpos */
-	 complain_overflow_bitfield, /* complain_on_overflow */
-	 mips_refhi_reloc,	/* special_function */
-	 "REFHI",		/* name */
-	 TRUE,			/* partial_inplace */
-	 0xffff,		/* src_mask */
-	 0xffff,		/* dst_mask */
-	 FALSE),		/* pcrel_offset */
-
-  /* The low 16 bits of a symbol value.  */
-  HOWTO (MIPS_R_REFLO,		/* type */
-	 0,			/* rightshift */
-	 2,			/* size (0 = byte, 1 = short, 2 = long) */
-	 16,			/* bitsize */
-	 FALSE,			/* pc_relative */
-	 0,			/* bitpos */
-	 complain_overflow_dont, /* complain_on_overflow */
-	 mips_reflo_reloc,	/* special_function */
-	 "REFLO",		/* name */
-	 TRUE,			/* partial_inplace */
-	 0xffff,		/* src_mask */
-	 0xffff,		/* dst_mask */
-	 FALSE),		/* pcrel_offset */
-
-  /* A reference to an offset from the gp register.  Handled by the
-     function mips_gprel_reloc.  */
-  HOWTO (MIPS_R_GPREL,		/* type */
-	 0,			/* rightshift */
-	 2,			/* size (0 = byte, 1 = short, 2 = long) */
-	 16,			/* bitsize */
-	 FALSE,			/* pc_relative */
-	 0,			/* bitpos */
-	 complain_overflow_signed, /* complain_on_overflow */
-	 mips_gprel_reloc,	/* special_function */
-	 "GPREL",		/* name */
-	 TRUE,			/* partial_inplace */
-	 0xffff,		/* src_mask */
-	 0xffff,		/* dst_mask */
-	 FALSE),		/* pcrel_offset */
-
-  /* A reference to a literal using an offset from the gp register.
-     Handled by the function mips_gprel_reloc.  */
-  HOWTO (MIPS_R_LITERAL,	/* type */
-	 0,			/* rightshift */
-	 2,			/* size (0 = byte, 1 = short, 2 = long) */
-	 16,			/* bitsize */
-	 FALSE,			/* pc_relative */
-	 0,			/* bitpos */
-	 complain_overflow_signed, /* complain_on_overflow */
-	 mips_gprel_reloc,	/* special_function */
-	 "LITERAL",		/* name */
-	 TRUE,			/* partial_inplace */
-	 0xffff,		/* src_mask */
-	 0xffff,		/* dst_mask */
-	 FALSE),		/* pcrel_offset */
-
-  EMPTY_HOWTO (8),
-  EMPTY_HOWTO (9),
-  EMPTY_HOWTO (10),
-  EMPTY_HOWTO (11),
-
-  /* FIXME: This relocation is used (internally only) to represent branches
-     when assembling.  It should never appear in output files, and
-     be removed.  (It used to be used for embedded-PIC support.)  */
-  HOWTO (MIPS_R_PCREL16,	/* type */
-	 2,			/* rightshift */
-	 2,			/* size (0 = byte, 1 = short, 2 = long) */
-	 16,			/* bitsize */
-	 TRUE,			/* pc_relative */
-	 0,			/* bitpos */
-	 complain_overflow_signed, /* complain_on_overflow */
-	 mips_generic_reloc,	/* special_function */
-	 "PCREL16",		/* name */
-	 TRUE,			/* partial_inplace */
-	 0xffff,		/* src_mask */
-	 0xffff,		/* dst_mask */
-	 TRUE),			/* pcrel_offset */
-};
-
-#define MIPS_HOWTO_COUNT \
-  (sizeof mips_howto_table / sizeof mips_howto_table[0])
-
-/* See whether the magic number matches.  */
-
-static bfd_boolean
-mips_ecoff_bad_format_hook (bfd * abfd, void * filehdr)
-{
-  struct internal_filehdr *internal_f = (struct internal_filehdr *) filehdr;
-
-  switch (internal_f->f_magic)
-    {
-    case MIPS_MAGIC_1:
-      /* I don't know what endianness this implies.  */
-      return TRUE;
-
-    case MIPS_MAGIC_BIG:
-    case MIPS_MAGIC_BIG2:
-    case MIPS_MAGIC_BIG3:
-      return bfd_big_endian (abfd);
-
-    case MIPS_MAGIC_LITTLE:
-    case MIPS_MAGIC_LITTLE2:
-    case MIPS_MAGIC_LITTLE3:
-      return bfd_little_endian (abfd);
-
-    default:
-      return FALSE;
-    }
-}
-
-/* Reloc handling.  MIPS ECOFF relocs are packed into 8 bytes in
-   external form.  They use a bit which indicates whether the symbol
-   is external.  */
-
-/* Swap a reloc in.  */
-
-static void
-mips_ecoff_swap_reloc_in (bfd *  abfd,
-			  void * ext_ptr,
-			  struct internal_reloc *intern)
-{
-  const RELOC *ext = (RELOC *) ext_ptr;
-
-  intern->r_vaddr = H_GET_32 (abfd, ext->r_vaddr);
-  if (bfd_header_big_endian (abfd))
-    {
-      intern->r_symndx = (((int) ext->r_bits[0]
-			   << RELOC_BITS0_SYMNDX_SH_LEFT_BIG)
-			  | ((int) ext->r_bits[1]
-			     << RELOC_BITS1_SYMNDX_SH_LEFT_BIG)
-			  | ((int) ext->r_bits[2]
-			     << RELOC_BITS2_SYMNDX_SH_LEFT_BIG));
-      intern->r_type = ((ext->r_bits[3] & RELOC_BITS3_TYPE_BIG)
-			>> RELOC_BITS3_TYPE_SH_BIG);
-      intern->r_extern = (ext->r_bits[3] & RELOC_BITS3_EXTERN_BIG) != 0;
-    }
-  else
-    {
-      intern->r_symndx = (((int) ext->r_bits[0]
-			   << RELOC_BITS0_SYMNDX_SH_LEFT_LITTLE)
-			  | ((int) ext->r_bits[1]
-			     << RELOC_BITS1_SYMNDX_SH_LEFT_LITTLE)
-			  | ((int) ext->r_bits[2]
-			     << RELOC_BITS2_SYMNDX_SH_LEFT_LITTLE));
-      intern->r_type = (((ext->r_bits[3] & RELOC_BITS3_TYPE_LITTLE)
-			 >> RELOC_BITS3_TYPE_SH_LITTLE)
-			| ((ext->r_bits[3] & RELOC_BITS3_TYPEHI_LITTLE)
-			   << RELOC_BITS3_TYPEHI_SH_LITTLE));
-      intern->r_extern = (ext->r_bits[3] & RELOC_BITS3_EXTERN_LITTLE) != 0;
-    }
-}
-
-/* Swap a reloc out.  */
-
-static void
-mips_ecoff_swap_reloc_out (bfd * abfd,
-			   const struct internal_reloc * intern,
-			   void * dst)
-{
-  RELOC *ext = (RELOC *) dst;
-  long r_symndx;
-
-  BFD_ASSERT (intern->r_extern
-	      || (intern->r_symndx >= 0 && intern->r_symndx <= 12));
-
-  r_symndx = intern->r_symndx;
-
-  H_PUT_32 (abfd, intern->r_vaddr, ext->r_vaddr);
-  if (bfd_header_big_endian (abfd))
-    {
-      ext->r_bits[0] = r_symndx >> RELOC_BITS0_SYMNDX_SH_LEFT_BIG;
-      ext->r_bits[1] = r_symndx >> RELOC_BITS1_SYMNDX_SH_LEFT_BIG;
-      ext->r_bits[2] = r_symndx >> RELOC_BITS2_SYMNDX_SH_LEFT_BIG;
-      ext->r_bits[3] = (((intern->r_type << RELOC_BITS3_TYPE_SH_BIG)
-			 & RELOC_BITS3_TYPE_BIG)
-			| (intern->r_extern ? RELOC_BITS3_EXTERN_BIG : 0));
-    }
-  else
-    {
-      ext->r_bits[0] = r_symndx >> RELOC_BITS0_SYMNDX_SH_LEFT_LITTLE;
-      ext->r_bits[1] = r_symndx >> RELOC_BITS1_SYMNDX_SH_LEFT_LITTLE;
-      ext->r_bits[2] = r_symndx >> RELOC_BITS2_SYMNDX_SH_LEFT_LITTLE;
-      ext->r_bits[3] = (((intern->r_type << RELOC_BITS3_TYPE_SH_LITTLE)
-			 & RELOC_BITS3_TYPE_LITTLE)
-			| ((intern->r_type >> RELOC_BITS3_TYPEHI_SH_LITTLE
-			    & RELOC_BITS3_TYPEHI_LITTLE))
-			| (intern->r_extern ? RELOC_BITS3_EXTERN_LITTLE : 0));
-    }
-}
-
-/* Finish canonicalizing a reloc.  Part of this is generic to all
-   ECOFF targets, and that part is in ecoff.c.  The rest is done in
-   this backend routine.  It must fill in the howto field.  */
-
-static void
-mips_adjust_reloc_in (bfd *abfd,
-		      const struct internal_reloc *intern,
-		      arelent *rptr)
-{
-  if (intern->r_type > MIPS_R_PCREL16)
-    abort ();
-
-  if (! intern->r_extern
-      && (intern->r_type == MIPS_R_GPREL
-	  || intern->r_type == MIPS_R_LITERAL))
-    rptr->addend += ecoff_data (abfd)->gp;
-
-  /* If the type is MIPS_R_IGNORE, make sure this is a reference to
-     the absolute section so that the reloc is ignored.  */
-  if (intern->r_type == MIPS_R_IGNORE)
-    rptr->sym_ptr_ptr = bfd_abs_section_ptr->symbol_ptr_ptr;
-
-  rptr->howto = &mips_howto_table[intern->r_type];
-}
-
-/* Make any adjustments needed to a reloc before writing it out.  None
-   are needed for MIPS.  */
-
-static void
-mips_adjust_reloc_out (bfd *abfd ATTRIBUTE_UNUSED,
-		       const arelent *rel ATTRIBUTE_UNUSED,
-		       struct internal_reloc *intern ATTRIBUTE_UNUSED)
-{
-}
-
-/* ECOFF relocs are either against external symbols, or against
-   sections.  If we are producing relocatable output, and the reloc
-   is against an external symbol, and nothing has given us any
-   additional addend, the resulting reloc will also be against the
-   same symbol.  In such a case, we don't want to change anything
-   about the way the reloc is handled, since it will all be done at
-   final link time.  Rather than put special case code into
-   bfd_perform_relocation, all the reloc types use this howto
-   function.  It just short circuits the reloc if producing
-   relocatable output against an external symbol.  */
-
-static bfd_reloc_status_type
-mips_generic_reloc (bfd *abfd ATTRIBUTE_UNUSED,
-		    arelent *reloc_entry,
-		    asymbol *symbol,
-		    void * data ATTRIBUTE_UNUSED,
-		    asection *input_section,
-		    bfd *output_bfd,
-		    char **error_message ATTRIBUTE_UNUSED)
-{
-  if (output_bfd != (bfd *) NULL
-      && (symbol->flags & BSF_SECTION_SYM) == 0
-      && reloc_entry->addend == 0)
-    {
-      reloc_entry->address += input_section->output_offset;
-      return bfd_reloc_ok;
-    }
-
-  return bfd_reloc_continue;
-}
-
-/* Do a REFHI relocation.  This has to be done in combination with a
-   REFLO reloc, because there is a carry from the REFLO to the REFHI.
-   Here we just save the information we need; we do the actual
-   relocation when we see the REFLO.  MIPS ECOFF requires that the
-   REFLO immediately follow the REFHI.  As a GNU extension, we permit
-   an arbitrary number of HI relocs to be associated with a single LO
-   reloc.  This extension permits gcc to output the HI and LO relocs
-   itself.  */
-
-struct mips_hi
-{
-  struct mips_hi *next;
-  bfd_byte *addr;
-  bfd_vma addend;
-};
-
-/* FIXME: This should not be a static variable.  */
-
-static struct mips_hi *mips_refhi_list;
-
-static bfd_reloc_status_type
-mips_refhi_reloc (bfd *abfd ATTRIBUTE_UNUSED,
-		  arelent *reloc_entry,
-		  asymbol *symbol,
-		  void * data,
-		  asection *input_section,
-		  bfd *output_bfd,
-		  char **error_message ATTRIBUTE_UNUSED)
-{
-  bfd_reloc_status_type ret;
-  bfd_vma relocation;
-  struct mips_hi *n;
-
-  /* If we're relocating, and this an external symbol, we don't want
-     to change anything.  */
-  if (output_bfd != (bfd *) NULL
-      && (symbol->flags & BSF_SECTION_SYM) == 0
-      && reloc_entry->addend == 0)
-    {
-      reloc_entry->address += input_section->output_offset;
-      return bfd_reloc_ok;
-    }
-
-  ret = bfd_reloc_ok;
-  if (bfd_is_und_section (symbol->section)
-      && output_bfd == (bfd *) NULL)
-    ret = bfd_reloc_undefined;
-
-  if (bfd_is_com_section (symbol->section))
-    relocation = 0;
-  else
-    relocation = symbol->value;
-
-  relocation += symbol->section->output_section->vma;
-  relocation += symbol->section->output_offset;
-  relocation += reloc_entry->addend;
-
-  if (reloc_entry->address > bfd_get_section_limit (abfd, input_section))
-    return bfd_reloc_outofrange;
-
-  /* Save the information, and let REFLO do the actual relocation.  */
-  n = (struct mips_hi *) bfd_malloc ((bfd_size_type) sizeof *n);
-  if (n == NULL)
-    return bfd_reloc_outofrange;
-  n->addr = (bfd_byte *) data + reloc_entry->address;
-  n->addend = relocation;
-  n->next = mips_refhi_list;
-  mips_refhi_list = n;
-
-  if (output_bfd != (bfd *) NULL)
-    reloc_entry->address += input_section->output_offset;
-
-  return ret;
-}
-
-/* Do a REFLO relocation.  This is a straightforward 16 bit inplace
-   relocation; this function exists in order to do the REFHI
-   relocation described above.  */
-
-static bfd_reloc_status_type
-mips_reflo_reloc (bfd *abfd ATTRIBUTE_UNUSED,
-		  arelent *reloc_entry,
-		  asymbol *symbol,
-		  void * data,
-		  asection *input_section,
-		  bfd *output_bfd,
-		  char **error_message ATTRIBUTE_UNUSED)
-{
-  if (mips_refhi_list != NULL)
-    {
-      struct mips_hi *l;
-
-      l = mips_refhi_list;
-      while (l != NULL)
-	{
-	  unsigned long insn;
-	  unsigned long val;
-	  unsigned long vallo;
-	  struct mips_hi *next;
-
-	  if (! bfd_reloc_offset_in_range (reloc_entry->howto, abfd,
-					   input_section,
-					   reloc_entry->address
-					   * bfd_octets_per_byte (abfd)))
-	    return bfd_reloc_outofrange;
-
-	  /* Do the REFHI relocation.  Note that we actually don't
-	     need to know anything about the REFLO itself, except
-	     where to find the low 16 bits of the addend needed by the
-	     REFHI.  */
-	  insn = bfd_get_32 (abfd, l->addr);
-	  vallo = (bfd_get_32 (abfd, (bfd_byte *) data + reloc_entry->address)
-		   & 0xffff);
-	  val = ((insn & 0xffff) << 16) + vallo;
-	  val += l->addend;
-
-	  /* The low order 16 bits are always treated as a signed
-	     value.  Therefore, a negative value in the low order bits
-	     requires an adjustment in the high order bits.  We need
-	     to make this adjustment in two ways: once for the bits we
-	     took from the data, and once for the bits we are putting
-	     back in to the data.  */
-	  if ((vallo & 0x8000) != 0)
-	    val -= 0x10000;
-	  if ((val & 0x8000) != 0)
-	    val += 0x10000;
-
-	  insn = (insn &~ (unsigned) 0xffff) | ((val >> 16) & 0xffff);
-	  bfd_put_32 (abfd, (bfd_vma) insn, l->addr);
-
-	  next = l->next;
-	  free (l);
-	  l = next;
-	}
-
-      mips_refhi_list = NULL;
-    }
-
-  /* Now do the REFLO reloc in the usual way.  */
-  return mips_generic_reloc (abfd, reloc_entry, symbol, data,
-			      input_section, output_bfd, error_message);
-}
-
-/* Do a GPREL relocation.  This is a 16 bit value which must become
-   the offset from the gp register.  */
-
-static bfd_reloc_status_type
-mips_gprel_reloc (bfd *abfd ATTRIBUTE_UNUSED,
-		  arelent *reloc_entry,
-		  asymbol *symbol,
-		  void * data,
-		  asection *input_section,
-		  bfd *output_bfd,
-		  char **error_message ATTRIBUTE_UNUSED)
-{
-  bfd_boolean relocatable;
-  bfd_vma gp;
-  bfd_vma relocation;
-  unsigned long val;
-  unsigned long insn;
-
-  /* If we're relocating, and this is an external symbol with no
-     addend, we don't want to change anything.  We will only have an
-     addend if this is a newly created reloc, not read from an ECOFF
-     file.  */
-  if (output_bfd != (bfd *) NULL
-      && (symbol->flags & BSF_SECTION_SYM) == 0
-      && reloc_entry->addend == 0)
-    {
-      reloc_entry->address += input_section->output_offset;
-      return bfd_reloc_ok;
-    }
-
-  if (output_bfd != (bfd *) NULL)
-    relocatable = TRUE;
-  else
-    {
-      relocatable = FALSE;
-      output_bfd = symbol->section->output_section->owner;
-    }
-
-  if (bfd_is_und_section (symbol->section) && ! relocatable)
-    return bfd_reloc_undefined;
-
-  /* We have to figure out the gp value, so that we can adjust the
-     symbol value correctly.  We look up the symbol _gp in the output
-     BFD.  If we can't find it, we're stuck.  We cache it in the ECOFF
-     target data.  We don't need to adjust the symbol value for an
-     external symbol if we are producing relocatable output.  */
-  gp = _bfd_get_gp_value (output_bfd);
-  if (gp == 0
-      && (! relocatable
-	  || (symbol->flags & BSF_SECTION_SYM) != 0))
-    {
-      if (relocatable)
-	{
-	  /* Make up a value.  */
-	  gp = symbol->section->output_section->vma + 0x4000;
-	  _bfd_set_gp_value (output_bfd, gp);
-	}
-      else
-	{
-	  unsigned int count;
-	  asymbol **sym;
-	  unsigned int i;
-
-	  count = bfd_get_symcount (output_bfd);
-	  sym = bfd_get_outsymbols (output_bfd);
-
-	  if (sym == (asymbol **) NULL)
-	    i = count;
-	  else
-	    {
-	      for (i = 0; i < count; i++, sym++)
-		{
-		  register const char *name;
-
-		  name = bfd_asymbol_name (*sym);
-		  if (*name == '_' && strcmp (name, "_gp") == 0)
-		    {
-		      gp = bfd_asymbol_value (*sym);
-		      _bfd_set_gp_value (output_bfd, gp);
-		      break;
-		    }
-		}
-	    }
-
-	  if (i >= count)
-	    {
-	      /* Only get the error once.  */
-	      gp = 4;
-	      _bfd_set_gp_value (output_bfd, gp);
-	      *error_message =
-		(char *) _("GP relative relocation when _gp not defined");
-	      return bfd_reloc_dangerous;
-	    }
-	}
-    }
-
-  if (bfd_is_com_section (symbol->section))
-    relocation = 0;
-  else
-    relocation = symbol->value;
-
-  relocation += symbol->section->output_section->vma;
-  relocation += symbol->section->output_offset;
-
-  if (reloc_entry->address > bfd_get_section_limit (abfd, input_section))
-    return bfd_reloc_outofrange;
-
-  insn = bfd_get_32 (abfd, (bfd_byte *) data + reloc_entry->address);
-
-  /* Set val to the offset into the section or symbol.  */
-  val = ((insn & 0xffff) + reloc_entry->addend) & 0xffff;
-  if (val & 0x8000)
-    val -= 0x10000;
-
-  /* Adjust val for the final section location and GP value.  If we
-     are producing relocatable output, we don't want to do this for
-     an external symbol.  */
-  if (! relocatable
-      || (symbol->flags & BSF_SECTION_SYM) != 0)
-    val += relocation - gp;
-
-  insn = (insn &~ (unsigned) 0xffff) | (val & 0xffff);
-  bfd_put_32 (abfd, (bfd_vma) insn, (bfd_byte *) data + reloc_entry->address);
-
-  if (relocatable)
-    reloc_entry->address += input_section->output_offset;
-
-  /* Make sure it fit in 16 bits.  */
-  if ((long) val >= 0x8000 || (long) val < -0x8000)
-    return bfd_reloc_overflow;
-
-  return bfd_reloc_ok;
-}
-
-/* Get the howto structure for a generic reloc type.  */
-
-static reloc_howto_type *
-mips_bfd_reloc_type_lookup (bfd *abfd ATTRIBUTE_UNUSED,
-			    bfd_reloc_code_real_type code)
-{
-  int mips_type;
-
-  switch (code)
-    {
-    case BFD_RELOC_16:
-      mips_type = MIPS_R_REFHALF;
-      break;
-    case BFD_RELOC_32:
-    case BFD_RELOC_CTOR:
-      mips_type = MIPS_R_REFWORD;
-      break;
-    case BFD_RELOC_MIPS_JMP:
-      mips_type = MIPS_R_JMPADDR;
-      break;
-    case BFD_RELOC_HI16_S:
-      mips_type = MIPS_R_REFHI;
-      break;
-    case BFD_RELOC_LO16:
-      mips_type = MIPS_R_REFLO;
-      break;
-    case BFD_RELOC_GPREL16:
-      mips_type = MIPS_R_GPREL;
-      break;
-    case BFD_RELOC_MIPS_LITERAL:
-      mips_type = MIPS_R_LITERAL;
-      break;
-    case BFD_RELOC_16_PCREL_S2:
-      mips_type = MIPS_R_PCREL16;
-      break;
-    default:
-      return (reloc_howto_type *) NULL;
-    }
-
-  return &mips_howto_table[mips_type];
-}
-
-static reloc_howto_type *
-mips_bfd_reloc_name_lookup (bfd *abfd ATTRIBUTE_UNUSED,
-			    const char *r_name)
-{
-  unsigned int i;
-
-  for (i = 0;
-       i < sizeof (mips_howto_table) / sizeof (mips_howto_table[0]);
-       i++)
-    if (mips_howto_table[i].name != NULL
-	&& strcasecmp (mips_howto_table[i].name, r_name) == 0)
-      return &mips_howto_table[i];
-
-  return NULL;
-}
-
-/* A helper routine for mips_relocate_section which handles the REFHI
-   relocations.  The REFHI relocation must be followed by a REFLO
-   relocation, and the addend used is formed from the addends of both
-   instructions.  */
-
-static void
-mips_relocate_hi (struct internal_reloc *refhi,
-		  struct internal_reloc *reflo,
-		  bfd *input_bfd,
-		  asection *input_section,
-		  bfd_byte *contents,
-		  bfd_vma relocation)
-{
-  unsigned long insn;
-  unsigned long val;
-  unsigned long vallo;
-
-  if (refhi == NULL)
-    return;
-
-  insn = bfd_get_32 (input_bfd,
-		     contents + refhi->r_vaddr - input_section->vma);
-  if (reflo == NULL)
-    vallo = 0;
-  else
-    vallo = (bfd_get_32 (input_bfd,
-			 contents + reflo->r_vaddr - input_section->vma)
-	     & 0xffff);
-
-  val = ((insn & 0xffff) << 16) + vallo;
-  val += relocation;
-
-  /* The low order 16 bits are always treated as a signed value.
-     Therefore, a negative value in the low order bits requires an
-     adjustment in the high order bits.  We need to make this
-     adjustment in two ways: once for the bits we took from the data,
-     and once for the bits we are putting back in to the data.  */
-  if ((vallo & 0x8000) != 0)
-    val -= 0x10000;
-
-  if ((val & 0x8000) != 0)
-    val += 0x10000;
-
-  insn = (insn &~ (unsigned) 0xffff) | ((val >> 16) & 0xffff);
-  bfd_put_32 (input_bfd, (bfd_vma) insn,
-	      contents + refhi->r_vaddr - input_section->vma);
-}
-
-/* Relocate a section while linking a MIPS ECOFF file.  */
-
-static bfd_boolean
-mips_relocate_section (bfd *output_bfd,
-		       struct bfd_link_info *info,
-		       bfd *input_bfd,
-		       asection *input_section,
-		       bfd_byte *contents,
-		       void * external_relocs)
-{
-  asection **symndx_to_section;
-  struct ecoff_link_hash_entry **sym_hashes;
-  bfd_vma gp;
-  bfd_boolean gp_undefined;
-  struct external_reloc *ext_rel;
-  struct external_reloc *ext_rel_end;
-  unsigned int i;
-  bfd_boolean got_lo;
-  struct internal_reloc lo_int_rel;
-  bfd_size_type amt;
-
-  BFD_ASSERT (input_bfd->xvec->byteorder
-	      == output_bfd->xvec->byteorder);
-
-  /* We keep a table mapping the symndx found in an internal reloc to
-     the appropriate section.  This is faster than looking up the
-     section by name each time.  */
-  symndx_to_section = ecoff_data (input_bfd)->symndx_to_section;
-  if (symndx_to_section == (asection **) NULL)
-    {
-      amt = NUM_RELOC_SECTIONS * sizeof (asection *);
-      symndx_to_section = (asection **) bfd_alloc (input_bfd, amt);
-      if (!symndx_to_section)
-	return FALSE;
-
-      symndx_to_section[RELOC_SECTION_NONE] = NULL;
-      symndx_to_section[RELOC_SECTION_TEXT] =
-	bfd_get_section_by_name (input_bfd, ".text");
-      symndx_to_section[RELOC_SECTION_RDATA] =
-	bfd_get_section_by_name (input_bfd, ".rdata");
-      symndx_to_section[RELOC_SECTION_DATA] =
-	bfd_get_section_by_name (input_bfd, ".data");
-      symndx_to_section[RELOC_SECTION_SDATA] =
-	bfd_get_section_by_name (input_bfd, ".sdata");
-      symndx_to_section[RELOC_SECTION_SBSS] =
-	bfd_get_section_by_name (input_bfd, ".sbss");
-      symndx_to_section[RELOC_SECTION_BSS] =
-	bfd_get_section_by_name (input_bfd, ".bss");
-      symndx_to_section[RELOC_SECTION_INIT] =
-	bfd_get_section_by_name (input_bfd, ".init");
-      symndx_to_section[RELOC_SECTION_LIT8] =
-	bfd_get_section_by_name (input_bfd, ".lit8");
-      symndx_to_section[RELOC_SECTION_LIT4] =
-	bfd_get_section_by_name (input_bfd, ".lit4");
-      symndx_to_section[RELOC_SECTION_XDATA] = NULL;
-      symndx_to_section[RELOC_SECTION_PDATA] = NULL;
-      symndx_to_section[RELOC_SECTION_FINI] =
-	bfd_get_section_by_name (input_bfd, ".fini");
-      symndx_to_section[RELOC_SECTION_LITA] = NULL;
-      symndx_to_section[RELOC_SECTION_ABS] = NULL;
-
-      ecoff_data (input_bfd)->symndx_to_section = symndx_to_section;
-    }
-
-  sym_hashes = ecoff_data (input_bfd)->sym_hashes;
-
-  gp = _bfd_get_gp_value (output_bfd);
-  if (gp == 0)
-    gp_undefined = TRUE;
-  else
-    gp_undefined = FALSE;
-
-  got_lo = FALSE;
-
-  ext_rel = (struct external_reloc *) external_relocs;
-  ext_rel_end = ext_rel + input_section->reloc_count;
-  for (i = 0; ext_rel < ext_rel_end; ext_rel++, i++)
-    {
-      struct internal_reloc int_rel;
-      bfd_boolean use_lo = FALSE;
-      bfd_vma addend;
-      reloc_howto_type *howto;
-      struct ecoff_link_hash_entry *h = NULL;
-      asection *s = NULL;
-      bfd_vma relocation;
-      bfd_reloc_status_type r;
-
-      if (! got_lo)
-	mips_ecoff_swap_reloc_in (input_bfd, ext_rel, &int_rel);
-      else
-	{
-	  int_rel = lo_int_rel;
-	  got_lo = FALSE;
-	}
-
-      BFD_ASSERT (int_rel.r_type
-		  < sizeof mips_howto_table / sizeof mips_howto_table[0]);
-
-      /* The REFHI reloc requires special handling.  It must be followed
-	 by a REFLO reloc, and the addend is formed from both relocs.  */
-      if (int_rel.r_type == MIPS_R_REFHI)
-	{
-	  struct external_reloc *lo_ext_rel;
-
-	  /* As a GNU extension, permit an arbitrary number of REFHI
-	     relocs before the REFLO reloc.  This permits gcc to emit
-	     the HI and LO relocs itself.  */
-	  for (lo_ext_rel = ext_rel + 1;
-	       lo_ext_rel < ext_rel_end;
-	       lo_ext_rel++)
-	    {
-	      mips_ecoff_swap_reloc_in (input_bfd, lo_ext_rel,
-					&lo_int_rel);
-	      if (lo_int_rel.r_type != int_rel.r_type)
-		break;
-	    }
-
-	  if (lo_ext_rel < ext_rel_end
-	      && lo_int_rel.r_type == MIPS_R_REFLO
-	      && int_rel.r_extern == lo_int_rel.r_extern
-	      && int_rel.r_symndx == lo_int_rel.r_symndx)
-	    {
-	      use_lo = TRUE;
-	      if (lo_ext_rel == ext_rel + 1)
-		got_lo = TRUE;
-	    }
-	}
-
-      howto = &mips_howto_table[int_rel.r_type];
-
-      if (int_rel.r_extern)
-	{
-	  h = sym_hashes[int_rel.r_symndx];
-	  /* If h is NULL, that means that there is a reloc against an
-	     external symbol which we thought was just a debugging
-	     symbol.  This should not happen.  */
-	  if (h == (struct ecoff_link_hash_entry *) NULL)
-	    abort ();
-	}
-      else
-	{
-	  if (int_rel.r_symndx < 0 || int_rel.r_symndx >= NUM_RELOC_SECTIONS)
-	    s = NULL;
-	  else
-	    s = symndx_to_section[int_rel.r_symndx];
-
-	  if (s == (asection *) NULL)
-	    abort ();
-	}
-
-      /* The GPREL reloc uses an addend: the difference in the GP
-	 values.  */
-      if (int_rel.r_type != MIPS_R_GPREL
-	  && int_rel.r_type != MIPS_R_LITERAL)
-	addend = 0;
-      else
-	{
-	  if (gp_undefined)
-	    {
-	      (*info->callbacks->reloc_dangerous)
-		(info, _("GP relative relocation used when GP not defined"),
-		 input_bfd, input_section,
-		 int_rel.r_vaddr - input_section->vma);
-	      /* Only give the error once per link.  */
-	      gp = 4;
-	      _bfd_set_gp_value (output_bfd, gp);
-	      gp_undefined = FALSE;
-	    }
-	  if (! int_rel.r_extern)
-	    {
-	      /* This is a relocation against a section.  The current
-		 addend in the instruction is the difference between
-		 INPUT_SECTION->vma and the GP value of INPUT_BFD.  We
-		 must change this to be the difference between the
-		 final definition (which will end up in RELOCATION)
-		 and the GP value of OUTPUT_BFD (which is in GP).  */
-	      addend = ecoff_data (input_bfd)->gp - gp;
-	    }
-	  else if (! bfd_link_relocatable (info)
-		   || h->root.type == bfd_link_hash_defined
-		   || h->root.type == bfd_link_hash_defweak)
-	    {
-	      /* This is a relocation against a defined symbol.  The
-		 current addend in the instruction is simply the
-		 desired offset into the symbol (normally zero).  We
-		 are going to change this into a relocation against a
-		 defined symbol, so we want the instruction to hold
-		 the difference between the final definition of the
-		 symbol (which will end up in RELOCATION) and the GP
-		 value of OUTPUT_BFD (which is in GP).  */
-	      addend = - gp;
-	    }
-	  else
-	    {
-	      /* This is a relocation against an undefined or common
-		 symbol.  The current addend in the instruction is
-		 simply the desired offset into the symbol (normally
-		 zero).  We are generating relocatable output, and we
-		 aren't going to define this symbol, so we just leave
-		 the instruction alone.  */
-	      addend = 0;
-	    }
-	}
-
-      if (bfd_link_relocatable (info))
-	{
-	  /* We are generating relocatable output, and must convert
-	     the existing reloc.  */
-	  if (int_rel.r_extern)
-	    {
-	      if ((h->root.type == bfd_link_hash_defined
-		   || h->root.type == bfd_link_hash_defweak)
-		  && ! bfd_is_abs_section (h->root.u.def.section))
-		{
-		  const char *name;
-
-		  /* This symbol is defined in the output.  Convert
-		     the reloc from being against the symbol to being
-		     against the section.  */
-
-		  /* Clear the r_extern bit.  */
-		  int_rel.r_extern = 0;
-
-		  /* Compute a new r_symndx value.  */
-		  s = h->root.u.def.section;
-		  name = bfd_get_section_name (output_bfd,
-					       s->output_section);
-
-		  int_rel.r_symndx = -1;
-		  switch (name[1])
-		    {
-		    case 'b':
-		      if (strcmp (name, ".bss") == 0)
-			int_rel.r_symndx = RELOC_SECTION_BSS;
-		      break;
-		    case 'd':
-		      if (strcmp (name, ".data") == 0)
-			int_rel.r_symndx = RELOC_SECTION_DATA;
-		      break;
-		    case 'f':
-		      if (strcmp (name, ".fini") == 0)
-			int_rel.r_symndx = RELOC_SECTION_FINI;
-		      break;
-		    case 'i':
-		      if (strcmp (name, ".init") == 0)
-			int_rel.r_symndx = RELOC_SECTION_INIT;
-		      break;
-		    case 'l':
-		      if (strcmp (name, ".lit8") == 0)
-			int_rel.r_symndx = RELOC_SECTION_LIT8;
-		      else if (strcmp (name, ".lit4") == 0)
-			int_rel.r_symndx = RELOC_SECTION_LIT4;
-		      break;
-		    case 'r':
-		      if (strcmp (name, ".rdata") == 0)
-			int_rel.r_symndx = RELOC_SECTION_RDATA;
-		      break;
-		    case 's':
-		      if (strcmp (name, ".sdata") == 0)
-			int_rel.r_symndx = RELOC_SECTION_SDATA;
-		      else if (strcmp (name, ".sbss") == 0)
-			int_rel.r_symndx = RELOC_SECTION_SBSS;
-		      break;
-		    case 't':
-		      if (strcmp (name, ".text") == 0)
-			int_rel.r_symndx = RELOC_SECTION_TEXT;
-		      break;
-		    }
-
-		  if (int_rel.r_symndx == -1)
-		    abort ();
-
-		  /* Add the section VMA and the symbol value.  */
-		  relocation = (h->root.u.def.value
-				+ s->output_section->vma
-				+ s->output_offset);
-
-		  /* For a PC relative relocation, the object file
-		     currently holds just the addend.  We must adjust
-		     by the address to get the right value.  */
-		  if (howto->pc_relative)
-		    relocation -= int_rel.r_vaddr - input_section->vma;
-
-		  h = NULL;
-		}
-	      else
-		{
-		  /* Change the symndx value to the right one for the
-		     output BFD.  */
-		  int_rel.r_symndx = h->indx;
-		  if (int_rel.r_symndx == -1)
-		    {
-		      /* This symbol is not being written out.  */
-		      (*info->callbacks->unattached_reloc)
-			(info, h->root.root.string, input_bfd, input_section,
-			 int_rel.r_vaddr - input_section->vma);
-		      int_rel.r_symndx = 0;
-		    }
-		  relocation = 0;
-		}
-	    }
-	  else
-	    {
-	      /* This is a relocation against a section.  Adjust the
-		 value by the amount the section moved.  */
-	      relocation = (s->output_section->vma
-			    + s->output_offset
-			    - s->vma);
-	    }
-
-	  relocation += addend;
-	  addend = 0;
-
-	  /* Adjust a PC relative relocation by removing the reference
-	     to the original address in the section and including the
-	     reference to the new address.  */
-	  if (howto->pc_relative)
-	    relocation -= (input_section->output_section->vma
-			   + input_section->output_offset
-			   - input_section->vma);
-
-	  /* Adjust the contents.  */
-	  if (relocation == 0)
-	    r = bfd_reloc_ok;
-	  else
-	    {
-	      if (int_rel.r_type != MIPS_R_REFHI)
-		r = _bfd_relocate_contents (howto, input_bfd, relocation,
-					    (contents
-					     + int_rel.r_vaddr
-					     - input_section->vma));
-	      else
-		{
-		  mips_relocate_hi (&int_rel,
-				    use_lo ? &lo_int_rel : NULL,
-				    input_bfd, input_section, contents,
-				    relocation);
-		  r = bfd_reloc_ok;
-		}
-	    }
-
-	  /* Adjust the reloc address.  */
-	  int_rel.r_vaddr += (input_section->output_section->vma
-			      + input_section->output_offset
-			      - input_section->vma);
-
-	  /* Save the changed reloc information.  */
-	  mips_ecoff_swap_reloc_out (input_bfd, &int_rel, ext_rel);
-	}
-      else
-	{
-	  /* We are producing a final executable.  */
-	  if (int_rel.r_extern)
-	    {
-	      /* This is a reloc against a symbol.  */
-	      if (h->root.type == bfd_link_hash_defined
-		  || h->root.type == bfd_link_hash_defweak)
-		{
-		  asection *hsec;
-
-		  hsec = h->root.u.def.section;
-		  relocation = (h->root.u.def.value
-				+ hsec->output_section->vma
-				+ hsec->output_offset);
-		}
-	      else
-		{
-		  (*info->callbacks->undefined_symbol)
-		    (info, h->root.root.string, input_bfd, input_section,
-		     int_rel.r_vaddr - input_section->vma, TRUE);
-		  relocation = 0;
-		}
-	    }
-	  else
-	    {
-	      /* This is a reloc against a section.  */
-	      relocation = (s->output_section->vma
-			    + s->output_offset
-			    - s->vma);
-
-	      /* A PC relative reloc is already correct in the object
-		 file.  Make it look like a pcrel_offset relocation by
-		 adding in the start address.  */
-	      if (howto->pc_relative)
-		relocation += int_rel.r_vaddr;
-	    }
-
-	  if (int_rel.r_type != MIPS_R_REFHI)
-	    r = _bfd_final_link_relocate (howto,
-					  input_bfd,
-					  input_section,
-					  contents,
-					  (int_rel.r_vaddr
-					   - input_section->vma),
-					  relocation,
-					  addend);
-	  else
-	    {
-	      mips_relocate_hi (&int_rel,
-				use_lo ? &lo_int_rel : NULL,
-				input_bfd, input_section, contents,
-				relocation);
-	      r = bfd_reloc_ok;
-	    }
-	}
-
-      /* MIPS_R_JMPADDR requires peculiar overflow detection.  The
-	 instruction provides a 28 bit address (the two lower bits are
-	 implicit zeroes) which is combined with the upper four bits
-	 of the instruction address.  */
-      if (r == bfd_reloc_ok
-	  && int_rel.r_type == MIPS_R_JMPADDR
-	  && (((relocation
-		+ addend
-		+ (int_rel.r_extern ? 0 : s->vma))
-	       & 0xf0000000)
-	      != ((input_section->output_section->vma
-		   + input_section->output_offset
-		   + (int_rel.r_vaddr - input_section->vma))
-		  & 0xf0000000)))
-	r = bfd_reloc_overflow;
-
-      if (r != bfd_reloc_ok)
-	{
-	  switch (r)
-	    {
-	    default:
-	    case bfd_reloc_outofrange:
-	      abort ();
-	    case bfd_reloc_overflow:
-	      {
-		const char *name;
-
-		if (int_rel.r_extern)
-		  name = NULL;
-		else
-		  name = bfd_section_name (input_bfd, s);
-		(*info->callbacks->reloc_overflow)
-		  (info, (h ? &h->root : NULL), name, howto->name,
-		   (bfd_vma) 0, input_bfd, input_section,
-		   int_rel.r_vaddr - input_section->vma);
-	      }
-	      break;
-	    }
-	}
-    }
-
-  return TRUE;
-}
-
-static void
-mips_ecoff_swap_coff_aux_in (bfd *abfd ATTRIBUTE_UNUSED,
-			     void *ext1 ATTRIBUTE_UNUSED,
-			     int type ATTRIBUTE_UNUSED,
-			     int in_class ATTRIBUTE_UNUSED,
-			     int indx ATTRIBUTE_UNUSED,
-			     int numaux ATTRIBUTE_UNUSED,
-			     void *in1 ATTRIBUTE_UNUSED)
-{
-}
-
-static void
-mips_ecoff_swap_coff_sym_in (bfd *abfd ATTRIBUTE_UNUSED,
-			     void *ext1 ATTRIBUTE_UNUSED,
-			     void *in1 ATTRIBUTE_UNUSED)
-{
-}
-
-static void
-mips_ecoff_swap_coff_lineno_in (bfd *abfd ATTRIBUTE_UNUSED,
-				void *ext1 ATTRIBUTE_UNUSED,
-				void *in1 ATTRIBUTE_UNUSED)
-{
-}
-
-static unsigned int
-mips_ecoff_swap_coff_aux_out (bfd *abfd ATTRIBUTE_UNUSED,
-			      void *inp ATTRIBUTE_UNUSED,
-			      int type ATTRIBUTE_UNUSED,
-			      int in_class ATTRIBUTE_UNUSED,
-			      int indx ATTRIBUTE_UNUSED,
-			      int numaux ATTRIBUTE_UNUSED,
-			      void *extp ATTRIBUTE_UNUSED)
-{
-  return 0;
-}
-
-static unsigned int
-mips_ecoff_swap_coff_sym_out (bfd *abfd ATTRIBUTE_UNUSED,
-			      void *inp ATTRIBUTE_UNUSED,
-			      void *extp ATTRIBUTE_UNUSED)
-{
-  return 0;
-}
-
-static unsigned int
-mips_ecoff_swap_coff_lineno_out (bfd *abfd ATTRIBUTE_UNUSED,
-				 void *inp ATTRIBUTE_UNUSED,
-				 void *extp ATTRIBUTE_UNUSED)
-{
-  return 0;
-}
-
-static unsigned int
-mips_ecoff_swap_coff_reloc_out (bfd *abfd ATTRIBUTE_UNUSED,
-				void *inp ATTRIBUTE_UNUSED,
-				void *extp ATTRIBUTE_UNUSED)
-{
-  return 0;
-}
-
-/* This is the ECOFF backend structure.  The backend field of the
-   target vector points to this.  */
-
-static const struct ecoff_backend_data mips_ecoff_backend_data =
-{
-  /* COFF backend structure.  */
-  {
-    mips_ecoff_swap_coff_aux_in, mips_ecoff_swap_coff_sym_in,
-    mips_ecoff_swap_coff_lineno_in, mips_ecoff_swap_coff_aux_out,
-    mips_ecoff_swap_coff_sym_out, mips_ecoff_swap_coff_lineno_out,
-    mips_ecoff_swap_coff_reloc_out,
-    mips_ecoff_swap_filehdr_out, mips_ecoff_swap_aouthdr_out,
-    mips_ecoff_swap_scnhdr_out,
-    FILHSZ, AOUTSZ, SCNHSZ, 0, 0, 0, 0, FILNMLEN, TRUE,
-    ECOFF_NO_LONG_SECTION_NAMES, 4, FALSE, 2, 32768,
-    mips_ecoff_swap_filehdr_in, mips_ecoff_swap_aouthdr_in,
-    mips_ecoff_swap_scnhdr_in, NULL,
-    mips_ecoff_bad_format_hook, _bfd_ecoff_set_arch_mach_hook,
-    _bfd_ecoff_mkobject_hook, _bfd_ecoff_styp_to_sec_flags,
-    _bfd_ecoff_set_alignment_hook, _bfd_ecoff_slurp_symbol_table,
-    NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-    NULL, NULL, NULL
-  },
-  /* Supported architecture.  */
-  bfd_arch_mips,
-  /* Initial portion of armap string.  */
-  "__________",
-  /* The page boundary used to align sections in a demand-paged
-     executable file.  E.g., 0x1000.  */
-  0x1000,
-  /* TRUE if the .rdata section is part of the text segment, as on the
-     Alpha.  FALSE if .rdata is part of the data segment, as on the
-     MIPS.  */
-  FALSE,
-  /* Bitsize of constructor entries.  */
-  32,
-  /* Reloc to use for constructor entries.  */
-  &mips_howto_table[MIPS_R_REFWORD],
-  {
-    /* Symbol table magic number.  */
-    magicSym,
-    /* Alignment of debugging information.  E.g., 4.  */
-    4,
-    /* Sizes of external symbolic information.  */
-    sizeof (struct hdr_ext),
-    sizeof (struct dnr_ext),
-    sizeof (struct pdr_ext),
-    sizeof (struct sym_ext),
-    sizeof (struct opt_ext),
-    sizeof (struct fdr_ext),
-    sizeof (struct rfd_ext),
-    sizeof (struct ext_ext),
-    /* Functions to swap in external symbolic data.  */
-    ecoff_swap_hdr_in,
-    ecoff_swap_dnr_in,
-    ecoff_swap_pdr_in,
-    ecoff_swap_sym_in,
-    ecoff_swap_opt_in,
-    ecoff_swap_fdr_in,
-    ecoff_swap_rfd_in,
-    ecoff_swap_ext_in,
-    _bfd_ecoff_swap_tir_in,
-    _bfd_ecoff_swap_rndx_in,
-    /* Functions to swap out external symbolic data.  */
-    ecoff_swap_hdr_out,
-    ecoff_swap_dnr_out,
-    ecoff_swap_pdr_out,
-    ecoff_swap_sym_out,
-    ecoff_swap_opt_out,
-    ecoff_swap_fdr_out,
-    ecoff_swap_rfd_out,
-    ecoff_swap_ext_out,
-    _bfd_ecoff_swap_tir_out,
-    _bfd_ecoff_swap_rndx_out,
-    /* Function to read in symbolic data.  */
-    _bfd_ecoff_slurp_symbolic_info
-  },
-  /* External reloc size.  */
-  RELSZ,
-  /* Reloc swapping functions.  */
-  mips_ecoff_swap_reloc_in,
-  mips_ecoff_swap_reloc_out,
-  /* Backend reloc tweaking.  */
-  mips_adjust_reloc_in,
-  mips_adjust_reloc_out,
-  /* Relocate section contents while linking.  */
-  mips_relocate_section,
-  /* Do final adjustments to filehdr and aouthdr.  */
-  NULL,
-  /* Read an element from an archive at a given file position.  */
-  _bfd_get_elt_at_filepos
-};
-
-/* Looking up a reloc type is MIPS specific.  */
-#define _bfd_ecoff_bfd_reloc_type_lookup mips_bfd_reloc_type_lookup
-#define _bfd_ecoff_bfd_reloc_name_lookup mips_bfd_reloc_name_lookup
-
-/* Getting relocated section contents is generic.  */
-#define _bfd_ecoff_bfd_get_relocated_section_contents \
-  bfd_generic_get_relocated_section_contents
-
-/* Handling file windows is generic.  */
-#define _bfd_ecoff_get_section_contents_in_window \
-  _bfd_generic_get_section_contents_in_window
-
-/* Relaxing sections is MIPS specific.  */
-#define _bfd_ecoff_bfd_relax_section bfd_generic_relax_section
-
-/* GC of sections is not done.  */
-#define _bfd_ecoff_bfd_gc_sections bfd_generic_gc_sections
-
-/* Input section flags is not implemented.  */
-#define _bfd_ecoff_bfd_lookup_section_flags bfd_generic_lookup_section_flags
-
-/* Merging of sections is not done.  */
-#define _bfd_ecoff_bfd_merge_sections bfd_generic_merge_sections
-
-#define _bfd_ecoff_bfd_is_group_section bfd_generic_is_group_section
-#define _bfd_ecoff_bfd_discard_group bfd_generic_discard_group
-#define _bfd_ecoff_section_already_linked \
-  _bfd_coff_section_already_linked
-#define _bfd_ecoff_bfd_define_common_symbol bfd_generic_define_common_symbol
-#define _bfd_ecoff_bfd_define_start_stop bfd_generic_define_start_stop
-#define _bfd_ecoff_set_reloc _bfd_generic_set_reloc
-
-extern const bfd_target mips_ecoff_be_vec;
-
-const bfd_target mips_ecoff_le_vec =
-{
-  "ecoff-littlemips",		/* name */
-  bfd_target_ecoff_flavour,
-  BFD_ENDIAN_LITTLE,		/* data byte order is little */
-  BFD_ENDIAN_LITTLE,		/* header byte order is little */
-
-  (HAS_RELOC | EXEC_P		/* object flags */
-   | HAS_LINENO | HAS_DEBUG
-   | HAS_SYMS | HAS_LOCALS | WP_TEXT | D_PAGED),
-
-  (SEC_HAS_CONTENTS | SEC_ALLOC | SEC_LOAD | SEC_RELOC | SEC_CODE | SEC_DATA),
-  0,				/* leading underscore */
-  ' ',				/* ar_pad_char */
-  15,				/* ar_max_namelen */
-  0,				/* match priority.  */
-  bfd_getl64, bfd_getl_signed_64, bfd_putl64,
-     bfd_getl32, bfd_getl_signed_32, bfd_putl32,
-     bfd_getl16, bfd_getl_signed_16, bfd_putl16, /* data */
-  bfd_getl64, bfd_getl_signed_64, bfd_putl64,
-     bfd_getl32, bfd_getl_signed_32, bfd_putl32,
-     bfd_getl16, bfd_getl_signed_16, bfd_putl16, /* hdrs */
-
-  {				/* bfd_check_format */
-    _bfd_dummy_target,
-    coff_object_p,
-    bfd_generic_archive_p,
-    _bfd_dummy_target
-  },
-  {				/* bfd_set_format */
-    _bfd_bool_bfd_false_error,
-    _bfd_ecoff_mkobject,
-    _bfd_generic_mkarchive,
-    _bfd_bool_bfd_false_error
-  },
-  {				/* bfd_write_contents */
-    _bfd_bool_bfd_false_error,
-    _bfd_ecoff_write_object_contents,
-    _bfd_write_archive_contents,
-    _bfd_bool_bfd_false_error
-  },
-
-  BFD_JUMP_TABLE_GENERIC (_bfd_ecoff),
-  BFD_JUMP_TABLE_COPY (_bfd_ecoff),
-  BFD_JUMP_TABLE_CORE (_bfd_nocore),
-  BFD_JUMP_TABLE_ARCHIVE (_bfd_ecoff),
-  BFD_JUMP_TABLE_SYMBOLS (_bfd_ecoff),
-  BFD_JUMP_TABLE_RELOCS (_bfd_ecoff),
-  BFD_JUMP_TABLE_WRITE (_bfd_ecoff),
-  BFD_JUMP_TABLE_LINK (_bfd_ecoff),
-  BFD_JUMP_TABLE_DYNAMIC (_bfd_nodynamic),
-
-  &mips_ecoff_be_vec,
-
-  &mips_ecoff_backend_data
-};
-
-const bfd_target mips_ecoff_be_vec =
-{
-  "ecoff-bigmips",		/* name */
-  bfd_target_ecoff_flavour,
-  BFD_ENDIAN_BIG,		/* data byte order is big */
-  BFD_ENDIAN_BIG,		/* header byte order is big */
-
-  (HAS_RELOC | EXEC_P		/* object flags */
-   | HAS_LINENO | HAS_DEBUG
-   | HAS_SYMS | HAS_LOCALS | WP_TEXT | D_PAGED),
-
-  (SEC_HAS_CONTENTS | SEC_ALLOC | SEC_LOAD | SEC_RELOC | SEC_CODE | SEC_DATA),
-  0,				/* leading underscore */
-  ' ',				/* ar_pad_char */
-  15,				/* ar_max_namelen */
-  0,				/* match priority.  */
-  bfd_getb64, bfd_getb_signed_64, bfd_putb64,
-     bfd_getb32, bfd_getb_signed_32, bfd_putb32,
-     bfd_getb16, bfd_getb_signed_16, bfd_putb16,
-  bfd_getb64, bfd_getb_signed_64, bfd_putb64,
-     bfd_getb32, bfd_getb_signed_32, bfd_putb32,
-     bfd_getb16, bfd_getb_signed_16, bfd_putb16,
-
-  {				/* bfd_check_format */
-    _bfd_dummy_target,
-    coff_object_p,
-    bfd_generic_archive_p,
-    _bfd_dummy_target
-  },
-  {				/* bfd_set_format */
-    _bfd_bool_bfd_false_error,
-    _bfd_ecoff_mkobject,
-    _bfd_generic_mkarchive,
-    _bfd_bool_bfd_false_error
-  },
-  {				/* bfd_write_contents */
-    _bfd_bool_bfd_false_error,
-    _bfd_ecoff_write_object_contents,
-    _bfd_write_archive_contents,
-    _bfd_bool_bfd_false_error
-  },
-
-  BFD_JUMP_TABLE_GENERIC (_bfd_ecoff),
-  BFD_JUMP_TABLE_COPY (_bfd_ecoff),
-  BFD_JUMP_TABLE_CORE (_bfd_nocore),
-  BFD_JUMP_TABLE_ARCHIVE (_bfd_ecoff),
-  BFD_JUMP_TABLE_SYMBOLS (_bfd_ecoff),
-  BFD_JUMP_TABLE_RELOCS (_bfd_ecoff),
-  BFD_JUMP_TABLE_WRITE (_bfd_ecoff),
-  BFD_JUMP_TABLE_LINK (_bfd_ecoff),
-  BFD_JUMP_TABLE_DYNAMIC (_bfd_nodynamic),
-
-  &mips_ecoff_le_vec,
-
-  &mips_ecoff_backend_data
-};
-
-const bfd_target mips_ecoff_bele_vec =
-{
-  "ecoff-biglittlemips",		/* name */
-  bfd_target_ecoff_flavour,
-  BFD_ENDIAN_LITTLE,		/* data byte order is little */
-  BFD_ENDIAN_BIG,		/* header byte order is big */
-
-  (HAS_RELOC | EXEC_P		/* object flags */
-   | HAS_LINENO | HAS_DEBUG
-   | HAS_SYMS | HAS_LOCALS | WP_TEXT | D_PAGED),
-
-  (SEC_HAS_CONTENTS | SEC_ALLOC | SEC_LOAD | SEC_RELOC | SEC_CODE | SEC_DATA),
-  0,				/* leading underscore */
-  ' ',				/* ar_pad_char */
-  15,				/* ar_max_namelen */
-  0,				/* match priority.  */
-  bfd_getl64, bfd_getl_signed_64, bfd_putl64,
-     bfd_getl32, bfd_getl_signed_32, bfd_putl32,
-     bfd_getl16, bfd_getl_signed_16, bfd_putl16, /* data */
-  bfd_getb64, bfd_getb_signed_64, bfd_putb64,
-     bfd_getb32, bfd_getb_signed_32, bfd_putb32,
-     bfd_getb16, bfd_getb_signed_16, bfd_putb16, /* hdrs */
-
-  {				/* bfd_check_format */
-    _bfd_dummy_target,
-    coff_object_p,
-    bfd_generic_archive_p,
-    _bfd_dummy_target
-  },
-  {				/* bfd_set_format */
-    _bfd_bool_bfd_false_error,
-    _bfd_ecoff_mkobject,
-    _bfd_generic_mkarchive,
-    _bfd_bool_bfd_false_error
-  },
-  {				/* bfd_write_contents */
-    _bfd_bool_bfd_false_error,
-    _bfd_ecoff_write_object_contents,
-    _bfd_write_archive_contents,
-    _bfd_bool_bfd_false_error
-  },
-
-  BFD_JUMP_TABLE_GENERIC (_bfd_ecoff),
-  BFD_JUMP_TABLE_COPY (_bfd_ecoff),
-  BFD_JUMP_TABLE_CORE (_bfd_nocore),
-  BFD_JUMP_TABLE_ARCHIVE (_bfd_ecoff),
-  BFD_JUMP_TABLE_SYMBOLS (_bfd_ecoff),
-  BFD_JUMP_TABLE_RELOCS (_bfd_ecoff),
-  BFD_JUMP_TABLE_WRITE (_bfd_ecoff),
-  BFD_JUMP_TABLE_LINK (_bfd_ecoff),
-  BFD_JUMP_TABLE_DYNAMIC (_bfd_nodynamic),
-
-  NULL,
-
-  &mips_ecoff_backend_data
-};
diff --git a/bfd/config.bfd b/bfd/config.bfd
index 38bfdfda10d..a662951eb61 100644
--- a/bfd/config.bfd
+++ b/bfd/config.bfd
@@ -53,17 +53,8 @@ case $targ in
     echo "*** Use or1k-*-elf or or1k-*-linux as the target instead" >&2
     exit 1
     ;;
- mips*-*-irix5* | mips*-*-irix6*)
-    # Not obsolete
-    ;;
  arm*-*-aout | \
  arm*-*-coff | \
- mips*-big-* | \
- mips*-dec-* | mips*el-*-ecoff* | \
- mips*-*-ecoff* | \
- mips*-sgi-* | mips*-*-bsd* | \
- mips*-*-lnews* | \
- mips*-*-sysv* | mips*-*-riscos* | \
  powerpc-*-lynxos* | powerpc-*-windiss* | \
  null)
     if test "x$enable_obsolete" != xyes; then
@@ -76,7 +67,8 @@ case $targ in
 esac
 
 case $targ in
- *-*-netbsdelf* | i[3-7]86-*-netbsd*-gnu* | i[3-7]86-*-knetbsd*-gnu)
+ *-*-netbsdelf* | i[3-7]86-*-netbsd*-gnu* | i[3-7]86-*-knetbsd*-gnu | \
+ mips*-*-irix5* | mips*-*-irix6*)
     # Not obsolete
     ;;
  *-adobe-* | \
@@ -133,6 +125,16 @@ case $targ in
  m68*-netx-* | \
  m88*-*-* | \
  maxq-*-coff | \
+ mips*-*-bsd* | \
+ mips*-*-ecoff* | \
+ mips*-*-lnews* | \
+ mips*-*-mach3* | \
+ mips*-*-pe* | \
+ mips*-*-riscos* | \
+ mips*-*-sysv* | \
+ mips*-big-* | \
+ mips*-dec-* | \
+ mips*-sgi-* | \
  mips*el-*-rtems* | \
  sh*-*-symbianelf* | sh5*-*-* | sh64*-*-* | \
  sparc*-*-*aout* | \
@@ -207,26 +209,8 @@ esac
 #  Make sure that the left side always has two dashes.  Otherwise you
 #  can get spurious matches.  Even for unambiguous cases, do this as a
 #  convention, else the table becomes a real mess to understand and maintain.
-#
-#  Keep obsolete entries above the START comment, to keep them out of
-#  targmatch.h.
 
 case "${targ}" in
-  mips*-dec-bsd*)
-    echo "This target is obsolete and has been removed."
-    exit 1
-    ;;
-
-  mips*-*-mach3*)
-    echo "This target is obsolete and has been removed."
-    exit 1
-    ;;
-
-  mips*-*-pe*)
-    echo "This target is obsolete and has been removed."
-    exit 1
-    ;;
-
   plugin)
     targ_defvec=plugin_vec
     targ_selvecs="plugin_vec"
@@ -876,28 +860,16 @@ case "${targ}" in
     targ_selvecs=microblaze_elf32_le_vec
     ;;
 
-  mips*-big-*)
-    targ_defvec=mips_ecoff_be_vec
-    targ_selvecs=mips_ecoff_le_vec
-    ;;
 #ifdef BFD64
   mips*el-*-netbsd*)
     targ_defvec=mips_elf32_trad_le_vec
-    targ_selvecs="mips_elf32_trad_be_vec mips_elf64_trad_be_vec mips_elf64_trad_le_vec mips_ecoff_le_vec mips_ecoff_be_vec"
+    targ_selvecs="mips_elf32_trad_be_vec mips_elf64_trad_be_vec mips_elf64_trad_le_vec"
     ;;
   mips*-*-netbsd*)
     targ_defvec=mips_elf32_trad_be_vec
-    targ_selvecs="mips_elf32_trad_le_vec mips_elf64_trad_be_vec mips_elf64_trad_le_vec mips_ecoff_be_vec mips_ecoff_le_vec"
+    targ_selvecs="mips_elf32_trad_le_vec mips_elf64_trad_be_vec mips_elf64_trad_le_vec"
     ;;
 #endif
-  mips*-dec-* | mips*el-*-ecoff*)
-    targ_defvec=mips_ecoff_le_vec
-    targ_selvecs=mips_ecoff_be_vec
-    ;;
-  mips*-*-ecoff*)
-    targ_defvec=mips_ecoff_be_vec
-    targ_selvecs=mips_ecoff_le_vec
-    ;;
 #ifdef BFD64
   mips*-*-irix6*)
     targ_defvec=mips_elf32_n_be_vec
@@ -913,27 +885,9 @@ case "${targ}" in
     ;;
   mips*-*-irix5*)
     targ_defvec=mips_elf32_be_vec
-    targ_selvecs="mips_elf32_le_vec mips_ecoff_be_vec mips_ecoff_le_vec"
-    ;;
-#endif
-  mips*-sgi-* | mips*-*-bsd*)
-    targ_defvec=mips_ecoff_be_vec
-    targ_selvecs=mips_ecoff_le_vec
-    ;;
-  mips*-*-lnews*)
-    targ_defvec=mips_ecoff_bele_vec
-    targ_selvecs="mips_ecoff_le_vec mips_ecoff_be_vec"
-    ;;
-#ifdef BFD64
-  mips*-*-sysv4*)
-    targ_defvec=mips_elf32_trad_be_vec
-    targ_selvecs="mips_elf32_trad_le_vec mips_ecoff_be_vec mips_ecoff_le_vec"
+    targ_selvecs="mips_elf32_le_vec"
     ;;
 #endif
-  mips*-*-sysv* | mips*-*-riscos*)
-    targ_defvec=mips_ecoff_be_vec
-    targ_selvecs=mips_ecoff_le_vec
-    ;;
 #ifdef BFD64
   mips*el-*-vxworks*)
     targ_defvec=mips_elf32_vxworks_le_vec
@@ -965,11 +919,11 @@ case "${targ}" in
     ;;
   mips*el-*-openbsd*)
     targ_defvec=mips_elf32_le_vec
-    targ_selvecs="mips_elf32_be_vec mips_elf64_be_vec mips_elf64_le_vec mips_ecoff_le_vec mips_ecoff_be_vec"
+    targ_selvecs="mips_elf32_be_vec mips_elf64_be_vec mips_elf64_le_vec"
     ;;
   mips*-*-openbsd*)
     targ_defvec=mips_elf32_be_vec
-    targ_selvecs="mips_elf32_le_vec mips_elf64_be_vec mips_elf64_le_vec mips_ecoff_be_vec mips_ecoff_le_vec"
+    targ_selvecs="mips_elf32_le_vec mips_elf64_be_vec mips_elf64_le_vec"
     ;;
   mips64*el-*-linux*)
     targ_defvec=mips_elf32_ntrad_le_vec
@@ -981,11 +935,11 @@ case "${targ}" in
     ;;
   mips*el-*-linux*)
     targ_defvec=mips_elf32_trad_le_vec
-    targ_selvecs="mips_elf32_trad_be_vec mips_ecoff_le_vec mips_ecoff_be_vec mips_elf32_ntrad_le_vec mips_elf64_trad_le_vec mips_elf32_ntrad_be_vec mips_elf64_trad_be_vec"
+    targ_selvecs="mips_elf32_trad_be_vec mips_elf32_ntrad_le_vec mips_elf64_trad_le_vec mips_elf32_ntrad_be_vec mips_elf64_trad_be_vec"
     ;;
   mips*-*-linux*)
     targ_defvec=mips_elf32_trad_be_vec
-    targ_selvecs="mips_elf32_trad_le_vec mips_ecoff_be_vec mips_ecoff_le_vec mips_elf32_ntrad_be_vec mips_elf64_trad_be_vec mips_elf32_ntrad_le_vec mips_elf64_trad_le_vec"
+    targ_selvecs="mips_elf32_trad_le_vec mips_elf32_ntrad_be_vec mips_elf64_trad_be_vec mips_elf32_ntrad_le_vec mips_elf64_trad_le_vec"
     ;;
   mips64*el-*-freebsd* | mips64*el-*-kfreebsd*-gnu)
     # FreeBSD vectors
diff --git a/bfd/configure b/bfd/configure
index ecfbff17658..127f9441672 100755
--- a/bfd/configure
+++ b/bfd/configure
@@ -14450,9 +14450,6 @@ do
     metag_elf32_vec)		 tb="$tb elf32-metag.lo elf32.lo $elf" ;;
     microblaze_elf32_vec)	 tb="$tb elf32-microblaze.lo elf32.lo $elf" ;;
     microblaze_elf32_le_vec)	 tb="$tb elf32-microblaze.lo elf32.lo $elf" ;;
-    mips_ecoff_be_vec)		 tb="$tb coff-mips.lo ecoff.lo $ecoff" ;;
-    mips_ecoff_le_vec)		 tb="$tb coff-mips.lo ecoff.lo $ecoff" ;;
-    mips_ecoff_bele_vec)	 tb="$tb coff-mips.lo ecoff.lo $ecoff" ;;
     mips_elf32_be_vec)		 tb="$tb elf32-mips.lo elfxx-mips.lo elf-vxworks.lo elf32.lo $elf $ecoff" ;;
     mips_elf32_le_vec)		 tb="$tb elf32-mips.lo elfxx-mips.lo elf-vxworks.lo elf32.lo $elf $ecoff" ;;
     mips_elf32_n_be_vec)	 tb="$tb elfn32-mips.lo elfxx-mips.lo elf-vxworks.lo elf32.lo $elf $ecoff"; target_size=64 ;;
@@ -14473,8 +14470,6 @@ do
     mips_elf64_trad_le_vec)	 tb="$tb elf64-mips.lo elf64.lo elfxx-mips.lo elf-vxworks.lo elf32.lo $elf $ecoff"; target_size=64 ;;
     mips_elf64_tradfbsd_be_vec)  tb="$tb elf64-mips.lo elf64.lo elfxx-mips.lo elf-vxworks.lo elf32.lo $elf $ecoff"; target_size=64 ;;
     mips_elf64_tradfbsd_le_vec)  tb="$tb elf64-mips.lo elf64.lo elfxx-mips.lo elf-vxworks.lo elf32.lo $elf $ecoff"; target_size=64 ;;
-    mips_pe_le_vec)		 tb="$tb pe-mips.lo peigen.lo $coff" ;;
-    mips_pei_le_vec)		 tb="$tb pei-mips.lo peigen.lo $coff" ;;
     mmix_elf64_vec)		 tb="$tb elf64-mmix.lo elf64.lo $elf" target_size=64 ;;
     mmix_mmo_vec)			 tb="$tb mmo.lo" target_size=64 ;;
     mn10200_elf32_vec)		 tb="$tb elf-m10200.lo elf32.lo $elf" ;;
@@ -14822,18 +14817,9 @@ if test "${target}" = "${host}"; then
   mips-*-netbsd* | mips*-*-openbsd*)
 	COREFILE=netbsd-core.lo
 	;;
-  mips-dec-*)
-	COREFILE=trad-core.lo
-	TRAD_HEADER='"hosts/decstation.h"'
-	;;
   mips-sgi-irix4*)	COREFILE=irix-core.lo ;;
   mips-sgi-irix5*)	COREFILE=irix-core.lo ;;
   mips-sgi-irix6*)	COREFILE=irix-core.lo ;;
-  mips-*-sysv4*)	;;
-  mips-*-sysv* | mips-*-riscos*)
-	COREFILE=trad-core.lo
-	TRAD_HEADER='"hosts/riscos.h"'
-	;;
   m68*-*-linux-*)
 	COREFILE=trad-core.lo
 	TRAD_HEADER='"hosts/m68klinux.h"'
diff --git a/bfd/configure.ac b/bfd/configure.ac
index 38f568ecaac..9c822f1b7e3 100644
--- a/bfd/configure.ac
+++ b/bfd/configure.ac
@@ -527,9 +527,6 @@ do
     metag_elf32_vec)		 tb="$tb elf32-metag.lo elf32.lo $elf" ;;
     microblaze_elf32_vec)	 tb="$tb elf32-microblaze.lo elf32.lo $elf" ;;
     microblaze_elf32_le_vec)	 tb="$tb elf32-microblaze.lo elf32.lo $elf" ;;
-    mips_ecoff_be_vec)		 tb="$tb coff-mips.lo ecoff.lo $ecoff" ;;
-    mips_ecoff_le_vec)		 tb="$tb coff-mips.lo ecoff.lo $ecoff" ;;
-    mips_ecoff_bele_vec)	 tb="$tb coff-mips.lo ecoff.lo $ecoff" ;;
     mips_elf32_be_vec)		 tb="$tb elf32-mips.lo elfxx-mips.lo elf-vxworks.lo elf32.lo $elf $ecoff" ;;
     mips_elf32_le_vec)		 tb="$tb elf32-mips.lo elfxx-mips.lo elf-vxworks.lo elf32.lo $elf $ecoff" ;;
     mips_elf32_n_be_vec)	 tb="$tb elfn32-mips.lo elfxx-mips.lo elf-vxworks.lo elf32.lo $elf $ecoff"; target_size=64 ;;
@@ -550,8 +547,6 @@ do
     mips_elf64_trad_le_vec)	 tb="$tb elf64-mips.lo elf64.lo elfxx-mips.lo elf-vxworks.lo elf32.lo $elf $ecoff"; target_size=64 ;;
     mips_elf64_tradfbsd_be_vec)  tb="$tb elf64-mips.lo elf64.lo elfxx-mips.lo elf-vxworks.lo elf32.lo $elf $ecoff"; target_size=64 ;;
     mips_elf64_tradfbsd_le_vec)  tb="$tb elf64-mips.lo elf64.lo elfxx-mips.lo elf-vxworks.lo elf32.lo $elf $ecoff"; target_size=64 ;;
-    mips_pe_le_vec)		 tb="$tb pe-mips.lo peigen.lo $coff" ;;
-    mips_pei_le_vec)		 tb="$tb pei-mips.lo peigen.lo $coff" ;;
     mmix_elf64_vec)		 tb="$tb elf64-mmix.lo elf64.lo $elf" target_size=64 ;;
     mmix_mmo_vec)			 tb="$tb mmo.lo" target_size=64 ;;
     mn10200_elf32_vec)		 tb="$tb elf-m10200.lo elf32.lo $elf" ;;
@@ -908,18 +903,9 @@ changequote([,])dnl
   mips-*-netbsd* | mips*-*-openbsd*)
 	COREFILE=netbsd-core.lo
 	;;
-  mips-dec-*)
-	COREFILE=trad-core.lo
-	TRAD_HEADER='"hosts/decstation.h"'
-	;;
   mips-sgi-irix4*)	COREFILE=irix-core.lo ;;
   mips-sgi-irix5*)	COREFILE=irix-core.lo ;;
   mips-sgi-irix6*)	COREFILE=irix-core.lo ;;
-  mips-*-sysv4*)	;;
-  mips-*-sysv* | mips-*-riscos*)
-	COREFILE=trad-core.lo
-	TRAD_HEADER='"hosts/riscos.h"'
-	;;
   m68*-*-linux-*)
 	COREFILE=trad-core.lo
 	TRAD_HEADER='"hosts/m68klinux.h"'
diff --git a/bfd/mipsbsd.c b/bfd/mipsbsd.c
deleted file mode 100644
index 1dc287abd0e..00000000000
--- a/bfd/mipsbsd.c
+++ /dev/null
@@ -1,511 +0,0 @@
-/* BFD backend for MIPS BSD (a.out) binaries.
-   Copyright (C) 1993-2018 Free Software Foundation, Inc.
-   Written by Ralph Campbell.
-
-   This file is part of BFD, the Binary File Descriptor library.
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 3 of the License, or
-   (at your option) any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston,
-   MA 02110-1301, USA.  */
-
-
-/* #define ENTRY_CAN_BE_ZERO */
-#define N_HEADER_IN_TEXT(x) 1
-#define N_TXTADDR(x) \
-    (N_MAGIC(x) != ZMAGIC ? (x)->a_entry :	/* object file or NMAGIC */\
-	    TEXT_START_ADDR + EXEC_BYTES_SIZE	/* no padding */\
-    )
-#define N_DATADDR(x) (N_TXTADDR(x)+N_TXTSIZE(x))
-#define TEXT_START_ADDR 4096
-#define TARGET_PAGE_SIZE 4096
-#define SEGMENT_SIZE TARGET_PAGE_SIZE
-#define DEFAULT_ARCH bfd_arch_mips
-#define MACHTYPE_OK(mtype) ((mtype) == M_UNKNOWN \
-			    || (mtype) == M_MIPS1 || (mtype) == M_MIPS2)
-#define MY_symbol_leading_char '\0'
-
-/* Do not "beautify" the CONCAT* macro args.  Traditional C will not
-   remove whitespace added here, and thus will fail to concatenate
-   the tokens.  */
-#define MY(OP) CONCAT2 (mipsbsd_,OP)
-
-#include "sysdep.h"
-#include "bfd.h"
-#include "libbfd.h"
-#include "libaout.h"
-
-#define SET_ARCH_MACH(ABFD, EXECP) \
-  MY(set_arch_mach) (ABFD, N_MACHTYPE (EXECP)); \
-  MY(choose_reloc_size) (ABFD);
-static void MY(set_arch_mach) (bfd *, unsigned long);
-static void MY(choose_reloc_size) (bfd *);
-
-#define MY_write_object_contents MY(write_object_contents)
-static bfd_boolean MY(write_object_contents) (bfd *);
-
-/* We can't use MY(x) here because it leads to a recursive call to CONCAT2
-   when expanded inside JUMP_TABLE.  */
-#define MY_bfd_reloc_type_lookup mipsbsd_reloc_type_lookup
-#define MY_bfd_reloc_name_lookup mipsbsd_reloc_name_lookup
-#define MY_canonicalize_reloc mipsbsd_canonicalize_reloc
-
-#define MY_bfd_link_hash_table_create _bfd_generic_link_hash_table_create
-#define MY_bfd_link_add_symbols _bfd_generic_link_add_symbols
-#define MY_final_link_callback unused
-#define MY_bfd_final_link _bfd_generic_final_link
-
-#define MY_backend_data &MY(backend_data)
-#define MY_BFD_TARGET
-
-#include "aout-target.h"
-
-static bfd_reloc_status_type mips_fix_jmp_addr
-  (bfd *, arelent *, struct bfd_symbol *, void *, asection *,
-   bfd *, char **);
-
-long MY(canonicalize_reloc) (bfd *, sec_ptr, arelent **, asymbol **);
-
-static void
-MY(set_arch_mach) (bfd *abfd, unsigned long machtype)
-{
-  enum bfd_architecture arch;
-  unsigned int machine;
-
-  /* Determine the architecture and machine type of the object file.  */
-  switch (machtype)
-    {
-    case M_MIPS1:
-      arch = bfd_arch_mips;
-      machine = bfd_mach_mips3000;
-      break;
-
-    case M_MIPS2:
-      arch = bfd_arch_mips;
-      machine = bfd_mach_mips4000;
-      break;
-
-    default:
-      arch = bfd_arch_obscure;
-      machine = 0;
-      break;
-    }
-
-  bfd_set_arch_mach (abfd, arch, machine);
-}
-
-/* Determine the size of a relocation entry, based on the architecture */
-static void
-MY (choose_reloc_size) (bfd *abfd)
-{
-  switch (bfd_get_arch (abfd))
-    {
-    case bfd_arch_sparc:
-    case bfd_arch_mips:
-      obj_reloc_entry_size (abfd) = RELOC_EXT_SIZE;
-      break;
-    default:
-      obj_reloc_entry_size (abfd) = RELOC_STD_SIZE;
-      break;
-    }
-}
-
-/* Write an object file in BSD a.out format.
-  Section contents have already been written.  We write the
-  file header, symbols, and relocation.  */
-
-static bfd_boolean
-MY (write_object_contents) (bfd *abfd)
-{
-  struct external_exec exec_bytes;
-  struct internal_exec *execp = exec_hdr (abfd);
-
-  /* Magic number, maestro, please!  */
-  switch (bfd_get_arch (abfd))
-    {
-    case bfd_arch_m68k:
-      switch (bfd_get_mach (abfd))
-	{
-	case bfd_mach_m68010:
-	  N_SET_MACHTYPE (execp, M_68010);
-	  break;
-	default:
-	case bfd_mach_m68020:
-	  N_SET_MACHTYPE (execp, M_68020);
-	  break;
-	}
-      break;
-    case bfd_arch_sparc:
-      N_SET_MACHTYPE (execp, M_SPARC);
-      break;
-    case bfd_arch_i386:
-      N_SET_MACHTYPE (execp, M_386);
-      break;
-    case bfd_arch_mips:
-      switch (bfd_get_mach (abfd))
-	{
-	case bfd_mach_mips4000:
-	case bfd_mach_mips6000:
-	  N_SET_MACHTYPE (execp, M_MIPS2);
-	  break;
-	default:
-	  N_SET_MACHTYPE (execp, M_MIPS1);
-	  break;
-	}
-      break;
-    default:
-      N_SET_MACHTYPE (execp, M_UNKNOWN);
-    }
-
-  MY (choose_reloc_size) (abfd);
-
-  WRITE_HEADERS (abfd, execp);
-
-  return TRUE;
-}
-
-/* MIPS relocation types.  */
-#define MIPS_RELOC_32		0
-#define MIPS_RELOC_JMP		1
-#define MIPS_RELOC_WDISP16	2
-#define MIPS_RELOC_HI16		3
-#define MIPS_RELOC_HI16_S	4
-#define MIPS_RELOC_LO16		5
-
-/* This is only called when performing a BFD_RELOC_MIPS_JMP relocation.
-   The jump destination address is formed from the upper 4 bits of the
-   "current" program counter concatenated with the jump instruction's
-   26 bit field and two trailing zeros.
-   If the destination address is not in the same segment as the "current"
-   program counter, then we need to signal an error.  */
-
-static bfd_reloc_status_type
-mips_fix_jmp_addr (bfd *abfd ATTRIBUTE_UNUSED,
-		   arelent *reloc_entry,
-		   struct bfd_symbol *symbol,
-		   void * data ATTRIBUTE_UNUSED,
-		   asection *input_section,
-		   bfd *output_bfd,
-		   char **error_message ATTRIBUTE_UNUSED)
-{
-  bfd_vma relocation, pc;
-
-  /* If this is a partial relocation, just continue.  */
-  if (output_bfd != (bfd *) NULL)
-    return bfd_reloc_continue;
-
-  /* If this is an undefined symbol, return error */
-  if (bfd_is_und_section (symbol->section)
-      && (symbol->flags & BSF_WEAK) == 0)
-    return bfd_reloc_undefined;
-
-  /* Work out which section the relocation is targeted at and the
-     initial relocation command value.  */
-  if (bfd_is_com_section (symbol->section))
-    relocation = 0;
-  else
-    relocation = symbol->value;
-
-  relocation += symbol->section->output_section->vma;
-  relocation += symbol->section->output_offset;
-  relocation += reloc_entry->addend;
-
-  pc = input_section->output_section->vma + input_section->output_offset +
-    reloc_entry->address + 4;
-
-  if ((relocation & 0xF0000000) != (pc & 0xF0000000))
-    return bfd_reloc_overflow;
-
-  return bfd_reloc_continue;
-}
-
-/* This is only called when performing a BFD_RELOC_HI16_S relocation.
-   We need to see if bit 15 is set in the result. If it is, we add
-   0x10000 and continue normally. This will compensate for the sign extension
-   when the low bits are added at run time.  */
-
-static bfd_reloc_status_type
-mips_fix_hi16_s (bfd *abfd ATTRIBUTE_UNUSED,
-		 arelent *reloc_entry,
-		 asymbol *symbol,
-		 void * data ATTRIBUTE_UNUSED,
-		 asection *input_section ATTRIBUTE_UNUSED,
-		 bfd *output_bfd,
-		 char **error_message ATTRIBUTE_UNUSED)
-{
-  bfd_vma relocation;
-
-  /* If this is a partial relocation, just continue.  */
-  if (output_bfd != (bfd *)NULL)
-    return bfd_reloc_continue;
-
-  /* If this is an undefined symbol, return error.  */
-  if (bfd_is_und_section (symbol->section)
-      && (symbol->flags & BSF_WEAK) == 0)
-    return bfd_reloc_undefined;
-
-  /* Work out which section the relocation is targeted at and the
-     initial relocation command value.  */
-  if (bfd_is_com_section (symbol->section))
-    relocation = 0;
-  else
-    relocation = symbol->value;
-
-  relocation += symbol->section->output_section->vma;
-  relocation += symbol->section->output_offset;
-  relocation += reloc_entry->addend;
-
-  if (relocation & 0x8000)
-    reloc_entry->addend += 0x10000;
-
-  return bfd_reloc_continue;
-}
-
-static reloc_howto_type mips_howto_table_ext[] =
-{
-  {MIPS_RELOC_32,      0, 2, 32, FALSE, 0,  complain_overflow_bitfield, 0,
-	"32",       FALSE, 0, 0xffffffff, FALSE},
-  {MIPS_RELOC_JMP,     2, 2, 26, FALSE, 0, complain_overflow_dont,
-	mips_fix_jmp_addr,
-	"MIPS_JMP", FALSE, 0, 0x03ffffff, FALSE},
-  {MIPS_RELOC_WDISP16, 2, 2, 16, TRUE,  0, complain_overflow_signed, 0,
-	"WDISP16",  FALSE, 0, 0x0000ffff, FALSE},
-  {MIPS_RELOC_HI16,   16, 2, 16, FALSE, 0, complain_overflow_bitfield, 0,
-	"HI16",     FALSE, 0, 0x0000ffff, FALSE},
-  {MIPS_RELOC_HI16_S, 16, 2, 16, FALSE, 0, complain_overflow_bitfield,
-	mips_fix_hi16_s,
-	"HI16_S",   FALSE, 0, 0x0000ffff, FALSE},
-  {MIPS_RELOC_LO16,    0, 2, 16, FALSE, 0, complain_overflow_dont, 0,
-	"LO16",     FALSE, 0, 0x0000ffff, FALSE},
-};
-
-static reloc_howto_type *
-MY(reloc_type_lookup) (bfd *abfd, bfd_reloc_code_real_type code)
-{
-  if (bfd_get_arch (abfd) != bfd_arch_mips)
-    return NULL;
-
-  switch (code)
-    {
-    case BFD_RELOC_CTOR:
-    case BFD_RELOC_32:
-      return (&mips_howto_table_ext[MIPS_RELOC_32]);
-    case BFD_RELOC_MIPS_JMP:
-      return (&mips_howto_table_ext[MIPS_RELOC_JMP]);
-    case BFD_RELOC_16_PCREL_S2:
-      return (&mips_howto_table_ext[MIPS_RELOC_WDISP16]);
-    case BFD_RELOC_HI16:
-      return (&mips_howto_table_ext[MIPS_RELOC_HI16]);
-    case BFD_RELOC_HI16_S:
-      return (&mips_howto_table_ext[MIPS_RELOC_HI16_S]);
-    case BFD_RELOC_LO16:
-      return (&mips_howto_table_ext[MIPS_RELOC_LO16]);
-    default:
-      return NULL;
-    }
-}
-
-static reloc_howto_type *
-MY(reloc_name_lookup) (bfd *abfd ATTRIBUTE_UNUSED,
-		       const char *r_name)
-{
-  unsigned int i;
-
-  for (i = 0;
-       i < sizeof (mips_howto_table_ext) / sizeof (mips_howto_table_ext[0]);
-       i++)
-    if (mips_howto_table_ext[i].name != NULL
-	&& strcasecmp (mips_howto_table_ext[i].name, r_name) == 0)
-      return &mips_howto_table_ext[i];
-
-  return NULL;
-}
-
-/* This is just like the standard aoutx.h version but we need to do our
-   own mapping of external reloc type values to howto entries.  */
-long
-MY(canonicalize_reloc) (bfd *abfd,
-			sec_ptr section,
-			arelent **relptr,
-			asymbol **symbols)
-{
-  arelent *tblptr = section->relocation;
-  unsigned int count, c;
-  extern reloc_howto_type NAME(aout,ext_howto_table)[];
-
-  /* If we have already read in the relocation table, return the values.  */
-  if (section->flags & SEC_CONSTRUCTOR)
-    {
-      arelent_chain *chain = section->constructor_chain;
-
-      for (count = 0; count < section->reloc_count; count++)
-	{
-	  *relptr++ = &chain->relent;
-	  chain = chain->next;
-	}
-      *relptr = 0;
-      return section->reloc_count;
-    }
-
-  if (tblptr && section->reloc_count)
-    {
-      for (count = 0; count++ < section->reloc_count;)
-	*relptr++ = tblptr++;
-      *relptr = 0;
-      return section->reloc_count;
-    }
-
-  if (!NAME(aout,slurp_reloc_table) (abfd, section, symbols))
-    return -1;
-  tblptr = section->relocation;
-
-  /* fix up howto entries.  */
-  for (count = 0; count++ < section->reloc_count;)
-    {
-      c = tblptr->howto - NAME(aout,ext_howto_table);
-      tblptr->howto = &mips_howto_table_ext[c];
-
-      *relptr++ = tblptr++;
-    }
-  *relptr = 0;
-  return section->reloc_count;
-}
-
-static const struct aout_backend_data MY(backend_data) =
-{
-  0,				/* zmagic contiguous */
-  1,				/* text incl header */
-  0,				/* entry is text address */
-  0,				/* exec_hdr_flags */
-  TARGET_PAGE_SIZE,			/* text vma */
-  MY_set_sizes,
-  0,				/* text size includes exec header */
-  0,				/* add_dynamic_symbols */
-  0,				/* add_one_symbol */
-  0,				/* link_dynamic_object */
-  0,				/* write_dynamic_symbol */
-  0,				/* check_dynamic_reloc */
-  0				/* finish_dynamic_link */
-};
-
-extern const bfd_target mips_aout_be_vec;
-
-const bfd_target mips_aout_le_vec =
-  {
-    "a.out-mips-little",	/* name */
-    bfd_target_aout_flavour,
-    BFD_ENDIAN_LITTLE,		/* target byte order (little) */
-    BFD_ENDIAN_LITTLE,		/* target headers byte order (little) */
-    (HAS_RELOC | EXEC_P		/* object flags */
-     | HAS_LINENO | HAS_DEBUG
-     | HAS_SYMS | HAS_LOCALS | WP_TEXT | D_PAGED),
-    (SEC_HAS_CONTENTS | SEC_ALLOC | SEC_LOAD | SEC_RELOC | SEC_CODE | SEC_DATA),
-    MY_symbol_leading_char,
-    ' ',			/* ar_pad_char */
-    15,				/* ar_max_namelen */
-    0,				/* match priority.  */
-    bfd_getl64, bfd_getl_signed_64, bfd_putl64,
-    bfd_getl32, bfd_getl_signed_32, bfd_putl32,
-    bfd_getl16, bfd_getl_signed_16, bfd_putl16, /* data */
-    bfd_getl64, bfd_getl_signed_64, bfd_putl64,
-    bfd_getl32, bfd_getl_signed_32, bfd_putl32,
-    bfd_getl16, bfd_getl_signed_16, bfd_putl16, /* hdrs */
-
-    {				/* bfd_check_format */
-      _bfd_dummy_target,
-      MY_object_p,
-      bfd_generic_archive_p,
-      MY_core_file_p
-    },
-    {				/* bfd_set_format */
-      _bfd_bool_bfd_false_error,
-      MY_mkobject,
-      _bfd_generic_mkarchive,
-      _bfd_bool_bfd_false_error
-    },
-    {				/* bfd_write_contents */
-      _bfd_bool_bfd_false_error,
-      MY_write_object_contents,
-      _bfd_write_archive_contents,
-      _bfd_bool_bfd_false_error
-    },
-
-    BFD_JUMP_TABLE_GENERIC (MY),
-    BFD_JUMP_TABLE_COPY (MY),
-    BFD_JUMP_TABLE_CORE (MY),
-    BFD_JUMP_TABLE_ARCHIVE (MY),
-    BFD_JUMP_TABLE_SYMBOLS (MY),
-    BFD_JUMP_TABLE_RELOCS (MY),
-    BFD_JUMP_TABLE_WRITE (MY),
-    BFD_JUMP_TABLE_LINK (MY),
-    BFD_JUMP_TABLE_DYNAMIC (_bfd_nodynamic),
-
-    &mips_aout_be_vec,
-
-    MY_backend_data
-  };
-
-const bfd_target mips_aout_be_vec =
-  {
-    "a.out-mips-big",		/* name */
-    bfd_target_aout_flavour,
-    BFD_ENDIAN_BIG,		/* target byte order (big) */
-    BFD_ENDIAN_BIG,		/* target headers byte order (big) */
-    (HAS_RELOC | EXEC_P		/* object flags */
-     | HAS_LINENO | HAS_DEBUG
-     | HAS_SYMS | HAS_LOCALS | WP_TEXT | D_PAGED),
-    (SEC_HAS_CONTENTS | SEC_ALLOC | SEC_LOAD | SEC_RELOC | SEC_CODE | SEC_DATA),
-    MY_symbol_leading_char,
-    ' ',			/* ar_pad_char */
-    15,				/* ar_max_namelen */
-    0,				/* match priority.  */
-    bfd_getb64, bfd_getb_signed_64, bfd_putb64,
-    bfd_getb32, bfd_getb_signed_32, bfd_putb32,
-    bfd_getb16, bfd_getb_signed_16, bfd_putb16, /* data */
-    bfd_getb64, bfd_getb_signed_64, bfd_putb64,
-    bfd_getb32, bfd_getb_signed_32, bfd_putb32,
-    bfd_getb16, bfd_getb_signed_16, bfd_putb16, /* hdrs */
-
-    {				/* bfd_check_format */
-      _bfd_dummy_target,
-      MY_object_p,
-      bfd_generic_archive_p,
-      MY_core_file_p
-    },
-    {				/* bfd_set_format */
-      _bfd_bool_bfd_false_error,
-      MY_mkobject,
-      _bfd_generic_mkarchive,
-      _bfd_bool_bfd_false_error
-    },
-    {				/* bfd_write_contents */
-      _bfd_bool_bfd_false_error,
-      MY_write_object_contents,
-      _bfd_write_archive_contents,
-      _bfd_bool_bfd_false_error
-    },
-
-    BFD_JUMP_TABLE_GENERIC (MY),
-    BFD_JUMP_TABLE_COPY (MY),
-    BFD_JUMP_TABLE_CORE (MY),
-    BFD_JUMP_TABLE_ARCHIVE (MY),
-    BFD_JUMP_TABLE_SYMBOLS (MY),
-    BFD_JUMP_TABLE_RELOCS (MY),
-    BFD_JUMP_TABLE_WRITE (MY),
-    BFD_JUMP_TABLE_LINK (MY),
-    BFD_JUMP_TABLE_DYNAMIC (_bfd_nodynamic),
-
-    &mips_aout_le_vec,
-
-    MY_backend_data
-  };
diff --git a/bfd/pe-mips.c b/bfd/pe-mips.c
deleted file mode 100644
index 1a617a1583d..00000000000
--- a/bfd/pe-mips.c
+++ /dev/null
@@ -1,936 +0,0 @@
-/* BFD back-end for MIPS PE COFF files.
-   Copyright (C) 1990-2018 Free Software Foundation, Inc.
-   Modified from coff-i386.c by DJ Delorie, dj@cygnus.com
-
-   This file is part of BFD, the Binary File Descriptor library.
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 3 of the License, or
-   (at your option) any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston,
-   MA 02110-1301, USA.  */
-
-#define COFF_WITH_PE
-/* pei-mips.c may have defined this to default off (0) before
-  including this file, so don't redefine if that's the case.
-  Otherwise we're generating objects, not executable images,
-  so we want to define it to default on.  */
-#ifndef COFF_LONG_SECTION_NAMES
-#define COFF_LONG_SECTION_NAMES
-#endif /* COFF_LONG_SECTION_NAMES */
-#define PCRELOFFSET TRUE
-
-#include "sysdep.h"
-#include "bfd.h"
-#include "libbfd.h"
-#include "coff/mipspe.h"
-#include "coff/internal.h"
-#include "coff/pe.h"
-#include "libcoff.h"
-
-#define COFF_DEFAULT_SECTION_ALIGNMENT_POWER 2
-/* The page size is a guess based on ELF.  */
-
-#define COFF_PAGE_SIZE 0x1000
-
-/* For some reason when using mips COFF the value stored in the .text
-   section for a reference to a common symbol is the value itself plus
-   any desired offset.  Ian Taylor, Cygnus Support.  */
-
-/* If we are producing relocatable output, we need to do some
-   adjustments to the object file that are not done by the
-   bfd_perform_relocation function.  This function is called by every
-   reloc type to make any required adjustments.  */
-
-static bfd_reloc_status_type
-coff_mips_reloc (bfd *abfd,
-		 arelent *reloc_entry,
-		 asymbol *symbol,
-		 void * data,
-		 asection *input_section ATTRIBUTE_UNUSED,
-		 bfd *output_bfd,
-		 char **error_message ATTRIBUTE_UNUSED)
-{
-  symvalue diff;
-
-  if (output_bfd == NULL)
-    return bfd_reloc_continue;
-
-  if (bfd_is_com_section (symbol->section))
-    {
-#ifndef COFF_WITH_PE
-      /* We are relocating a common symbol.  The current value in the
-	 object file is ORIG + OFFSET, where ORIG is the value of the
-	 common symbol as seen by the object file when it was compiled
-	 (this may be zero if the symbol was undefined) and OFFSET is
-	 the offset into the common symbol (normally zero, but may be
-	 non-zero when referring to a field in a common structure).
-	 ORIG is the negative of reloc_entry->addend, which is set by
-	 the CALC_ADDEND macro below.  We want to replace the value in
-	 the object file with NEW + OFFSET, where NEW is the value of
-	 the common symbol which we are going to put in the final
-	 object file.  NEW is symbol->value.  */
-      diff = symbol->value + reloc_entry->addend;
-#else
-      /* In PE mode, we do not offset the common symbol.  */
-      diff = reloc_entry->addend;
-#endif
-    }
-  else
-    /* For some reason bfd_perform_relocation always effectively
-       ignores the addend for a COFF target when producing
-       relocatable output.  This seems to be always wrong for 386
-       COFF, so we handle the addend here instead.  */
-    diff = reloc_entry->addend;
-
-#define DOIT(x) \
-  x = ((x & ~howto->dst_mask) | (((x & howto->src_mask) + (diff >> howto->rightshift)) & howto->dst_mask))
-
-  if (diff != 0)
-    {
-      reloc_howto_type *howto = reloc_entry->howto;
-      unsigned char *addr = (unsigned char *) data + reloc_entry->address;
-
-      switch (howto->size)
-	{
-	case 0:
-	  {
-	    char x = bfd_get_8 (abfd, addr);
-
-	    DOIT (x);
-	    bfd_put_8 (abfd, x, addr);
-	  }
-	  break;
-
-	case 1:
-	  {
-	    short x = bfd_get_16 (abfd, addr);
-
-	    DOIT (x);
-	    bfd_put_16 (abfd, (bfd_vma) x, addr);
-	  }
-	  break;
-
-	case 2:
-	  {
-	    long x = bfd_get_32 (abfd, addr);
-
-	    DOIT (x);
-	    bfd_put_32 (abfd, (bfd_vma) x, addr);
-	  }
-	  break;
-
-	default:
-	  abort ();
-	}
-    }
-
-  /* Now let bfd_perform_relocation finish everything up.  */
-  return bfd_reloc_continue;
-}
-
-#ifdef COFF_WITH_PE
-/* Return TRUE if this relocation should
-   appear in the output .reloc section.  */
-
-static bfd_boolean
-in_reloc_p (bfd * abfd ATTRIBUTE_UNUSED, reloc_howto_type *howto)
-{
-  return ! howto->pc_relative && howto->type != MIPS_R_RVA;
-}
-#endif
-
-#ifndef PCRELOFFSET
-#define PCRELOFFSET FALSE
-#endif
-
-static reloc_howto_type howto_table[] =
-{
-  /* Reloc type 0 is ignored.  The reloc reading code ensures that
-     this is a reference to the .abs section, which will cause
-     bfd_perform_relocation to do nothing.  */
-  HOWTO (MIPS_R_ABSOLUTE,	/* Type.  */
-	 0,			/* Rightshift.  */
-	 0,			/* Size (0 = byte, 1 = short, 2 = long).  */
-	 8,			/* Bitsize.  */
-	 FALSE,			/* PC_relative.  */
-	 0,			/* Bitpos. */
-	 complain_overflow_dont, /* Complain_on_overflow. */
-	 0,			/* Special_function. */
-	 "IGNORE",		/* Name. */
-	 FALSE,			/* Partial_inplace. */
-	 0,			/* Src_mask. */
-	 0,			/* Dst_mask. */
-	 FALSE),		/* Pcrel_offset. */
-
-  /* A 16 bit reference to a symbol, normally from a data section.  */
-  HOWTO (MIPS_R_REFHALF,	/* Type.  */
-	 0,			/* Rightshift.  */
-	 1,			/* Size (0 = byte, 1 = short, 2 = long).  */
-	 16,			/* Bitsize.  */
-	 FALSE,			/* PC_relative.  */
-	 0,			/* Bitpos. */
-	 complain_overflow_bitfield, /* Complain_on_overflow. */
-	 coff_mips_reloc,	/* Special_function. */
-	 "REFHALF",		/* Name. */
-	 TRUE,			/* Partial_inplace. */
-	 0xffff,		/* Src_mask. */
-	 0xffff,		/* Dst_mask. */
-	 FALSE),		/* Pcrel_offset. */
-
-  /* A 32 bit reference to a symbol, normally from a data section.  */
-  HOWTO (MIPS_R_REFWORD,	/* Type.  */
-	 0,			/* Rightshift.  */
-	 2,			/* Size (0 = byte, 1 = short, 2 = long).  */
-	 32,			/* Bitsize.  */
-	 FALSE,			/* PC_relative.  */
-	 0,			/* Bitpos. */
-	 complain_overflow_bitfield, /* Complain_on_overflow. */
-	 coff_mips_reloc,	/* Special_function. */
-	 "REFWORD",		/* Name. */
-	 TRUE,			/* Partial_inplace. */
-	 0xffffffff,		/* Src_mask. */
-	 0xffffffff,		/* Dst_mask. */
-	 FALSE),		/* Pcrel_offset. */
-
-  /* A 26 bit absolute jump address.  */
-  HOWTO (MIPS_R_JMPADDR,	/* Type.  */
-	 2,			/* Rightshift.  */
-	 2,			/* Size (0 = byte, 1 = short, 2 = long).  */
-	 26,			/* Bitsize.  */
-	 FALSE,			/* PC_relative.  */
-	 0,			/* Bitpos. */
-	 complain_overflow_dont, /* Complain_on_overflow. */
-				/* This needs complex overflow
-				   detection, because the upper four
-				   bits must match the PC.  */
-	 coff_mips_reloc,	/* Special_function. */
-	 "JMPADDR",		/* Name. */
-	 TRUE,			/* Partial_inplace. */
-	 0x3ffffff,		/* Src_mask. */
-	 0x3ffffff,		/* Dst_mask. */
-	 FALSE),		/* Pcrel_offset. */
-
-  /* The high 16 bits of a symbol value.  Handled by the function
-     mips_refhi_reloc.  */
-  HOWTO (MIPS_R_REFHI,		/* Type.  */
-	 16,			/* Rightshift.  */
-	 2,			/* Size (0 = byte, 1 = short, 2 = long).  */
-	 16,			/* Bitsize.  */
-	 FALSE,			/* PC_relative.  */
-	 0,			/* Bitpos. */
-	 complain_overflow_bitfield, /* Complain_on_overflow. */
-	 coff_mips_reloc,	/* Special_function. */
-	 "REFHI",		/* Name. */
-	 TRUE,			/* Partial_inplace. */
-	 0xffff,		/* Src_mask. */
-	 0xffff,		/* Dst_mask. */
-	 FALSE),		/* Pcrel_offset. */
-
-  /* The low 16 bits of a symbol value.  */
-  HOWTO (MIPS_R_REFLO,		/* Type.  */
-	 0,			/* Rightshift.  */
-	 2,			/* Size (0 = byte, 1 = short, 2 = long).  */
-	 16,			/* Bitsize.  */
-	 FALSE,			/* PC_relative.  */
-	 0,			/* Bitpos. */
-	 complain_overflow_dont, /* Complain_on_overflow. */
-	 coff_mips_reloc,	/* Special_function. */
-	 "REFLO",		/* Name. */
-	 TRUE,			/* Partial_inplace. */
-	 0xffff,		/* Src_mask. */
-	 0xffff,		/* Dst_mask. */
-	 FALSE),		/* Pcrel_offset. */
-
-  /* A reference to an offset from the gp register.  Handled by the
-     function mips_gprel_reloc.  */
-  HOWTO (MIPS_R_GPREL,		/* Type.  */
-	 0,			/* Rightshift.  */
-	 2,			/* Size (0 = byte, 1 = short, 2 = long).  */
-	 16,			/* Bitsize.  */
-	 FALSE,			/* PC_relative.  */
-	 0,			/* Bitpos. */
-	 complain_overflow_signed, /* Complain_on_overflow. */
-	 coff_mips_reloc,	/* Special_function. */
-	 "GPREL",		/* Name. */
-	 TRUE,			/* Partial_inplace. */
-	 0xffff,		/* Src_mask. */
-	 0xffff,		/* Dst_mask. */
-	 FALSE),		/* Pcrel_offset. */
-
-  /* A reference to a literal using an offset from the gp register.
-     Handled by the function mips_gprel_reloc.  */
-  HOWTO (MIPS_R_LITERAL,	/* Type.  */
-	 0,			/* Rightshift.  */
-	 2,			/* Size (0 = byte, 1 = short, 2 = long).  */
-	 16,			/* Bitsize.  */
-	 FALSE,			/* PC_relative.  */
-	 0,			/* Bitpos. */
-	 complain_overflow_signed, /* Complain_on_overflow. */
-	 coff_mips_reloc,	/* Special_function. */
-	 "LITERAL",		/* Name. */
-	 TRUE,			/* Partial_inplace. */
-	 0xffff,		/* Src_mask. */
-	 0xffff,		/* Dst_mask. */
-	 FALSE),		/* Pcrel_offset. */
-
-  EMPTY_HOWTO (8),
-  EMPTY_HOWTO (9),
-  EMPTY_HOWTO (10),
-  EMPTY_HOWTO (11),
-  EMPTY_HOWTO (12),
-  EMPTY_HOWTO (13),
-  EMPTY_HOWTO (14),
-  EMPTY_HOWTO (15),
-  EMPTY_HOWTO (16),
-  EMPTY_HOWTO (17),
-  EMPTY_HOWTO (18),
-  EMPTY_HOWTO (19),
-  EMPTY_HOWTO (20),
-  EMPTY_HOWTO (21),
-  EMPTY_HOWTO (22),
-  EMPTY_HOWTO (23),
-  EMPTY_HOWTO (24),
-  EMPTY_HOWTO (25),
-  EMPTY_HOWTO (26),
-  EMPTY_HOWTO (27),
-  EMPTY_HOWTO (28),
-  EMPTY_HOWTO (29),
-  EMPTY_HOWTO (30),
-  EMPTY_HOWTO (31),
-  EMPTY_HOWTO (32),
-  EMPTY_HOWTO (33),
-  HOWTO (MIPS_R_RVA,		/* Type.  */
-	 0,			/* Rightshift.  */
-	 2,			/* Size (0 = byte, 1 = short, 2 = long).  */
-	 32,			/* Bitsize.  */
-	 FALSE,			/* PC_relative.  */
-	 0,			/* Bitpos. */
-	 complain_overflow_bitfield, /* Complain_on_overflow. */
-	 coff_mips_reloc,	/* Special_function. */
-	 "rva32",		/* Name. */
-	 TRUE,			/* Partial_inplace. */
-	 0xffffffff,		/* Src_mask. */
-	 0xffffffff,		/* Dst_mask. */
-	 FALSE),		/* Pcrel_offset. */
-  EMPTY_HOWTO (35),
-  EMPTY_HOWTO (36),
-  HOWTO (MIPS_R_PAIR,		/* Type.  */
-	 0,			/* Rightshift.  */
-	 2,			/* Size (0 = byte, 1 = short, 2 = long).  */
-	 32,			/* Bitsize.  */
-	 FALSE,			/* PC_relative.  */
-	 0,			/* Bitpos. */
-	 complain_overflow_bitfield, /* Complain_on_overflow. */
-	 coff_mips_reloc,	/* Special_function. */
-	 "PAIR",		/* Name. */
-	 TRUE,			/* Partial_inplace. */
-	 0xffffffff,		/* Src_mask. */
-	 0xffffffff,		/* Dst_mask. */
-	 FALSE),		/* Pcrel_offset. */
-};
-
-#define NUM_HOWTOS (sizeof (howto_table) / sizeof (howto_table[0]))
-
-/* Turn a howto into a reloc nunmber.  */
-
-#define SELECT_RELOC(x, howto) { x.r_type = howto->type; }
-#define BADMAG(x)	       MIPSBADMAG (x)
-
-/* Customize coffcode.h.  */
-#define MIPS 1
-
-#define RTYPE2HOWTO(cache_ptr, dst)				\
-  ((cache_ptr)->howto =						\
-   ((dst)->r_type < NUM_HOWTOS					\
-    ? howto_table + (dst)->r_type				\
-    : NULL))
-
-/* Compute the addend of a reloc.  If the reloc is to a common symbol,
-   the object file contains the value of the common symbol.  By the
-   time this is called, the linker may be using a different symbol
-   from a different object file with a different value.  Therefore, we
-   hack wildly to locate the original symbol from this file so that we
-   can make the correct adjustment.  This macro sets coffsym to the
-   symbol from the original file, and uses it to set the addend value
-   correctly.  If this is not a common symbol, the usual addend
-   calculation is done, except that an additional tweak is needed for
-   PC relative relocs.
-   FIXME: This macro refers to symbols and asect; these are from the
-   calling function, not the macro arguments.  */
-
-#define CALC_ADDEND(abfd, ptr, reloc, cache_ptr)		\
-  {								\
-    coff_symbol_type *coffsym = NULL;				\
-    if (ptr && bfd_asymbol_bfd (ptr) != abfd)			\
-      coffsym = (obj_symbols (abfd)				\
-		 + (cache_ptr->sym_ptr_ptr - symbols));		\
-    else if (ptr)						\
-      coffsym = coff_symbol_from (ptr);				\
-    if (coffsym != NULL						\
-	&& coffsym->native->u.syment.n_scnum == 0)		\
-      cache_ptr->addend = - coffsym->native->u.syment.n_value;	\
-    else if (ptr && bfd_asymbol_bfd (ptr) == abfd		\
-	     && ptr->section != NULL)				\
-      cache_ptr->addend = - (ptr->section->vma + ptr->value);	\
-    else							\
-      cache_ptr->addend = 0;					\
-    if (ptr && reloc.r_type < NUM_HOWTOS			\
-	&& howto_table[reloc.r_type].pc_relative)		\
-      cache_ptr->addend += asect->vma;				\
-  }
-
-/* Convert an rtype to howto for the COFF backend linker.  */
-
-static reloc_howto_type *
-coff_mips_rtype_to_howto (bfd *abfd ATTRIBUTE_UNUSED,
-			  asection *sec,
-			  struct internal_reloc *rel,
-			  struct coff_link_hash_entry *h,
-			  struct internal_syment *sym,
-			  bfd_vma *addendp)
-{
-
-  reloc_howto_type *howto;
-
-  howto = howto_table + rel->r_type;
-
-#ifdef COFF_WITH_PE
-  *addendp = 0;
-#endif
-
-  if (howto->pc_relative)
-    *addendp += sec->vma;
-
-  if (sym != NULL && sym->n_scnum == 0 && sym->n_value != 0)
-    {
-      /* This is a common symbol.  The section contents include the
-	 size (sym->n_value) as an addend.  The relocate_section
-	 function will be adding in the final value of the symbol.  We
-	 need to subtract out the current size in order to get the
-	 correct result.  */
-
-      BFD_ASSERT (h != NULL);
-
-#ifndef COFF_WITH_PE
-      /* I think we *do* want to bypass this.  If we don't, I have
-	 seen some data parameters get the wrong relocation address.
-	 If I link two versions with and without this section bypassed
-	 and then do a binary comparison, the addresses which are
-	 different can be looked up in the map.  The case in which
-	 this section has been bypassed has addresses which correspond
-	 to values I can find in the map.  */
-      *addendp -= sym->n_value;
-#endif
-    }
-
-#ifndef COFF_WITH_PE
-  /* If the output symbol is common (in which case this must be a
-     relocatable link), we need to add in the final size of the
-     common symbol.  */
-  if (h != NULL && h->root.type == bfd_link_hash_common)
-    *addendp += h->root.u.c.size;
-#endif
-
-#ifdef COFF_WITH_PE
-  if (howto->pc_relative)
-    {
-      *addendp -= 4;
-
-      /* If the symbol is defined, then the generic code is going to
-	 add back the symbol value in order to cancel out an
-	 adjustment it made to the addend.  However, we set the addend
-	 to 0 at the start of this function.  We need to adjust here,
-	 to avoid the adjustment the generic code will make.  FIXME:
-	 This is getting a bit hackish.  */
-      if (sym != NULL && sym->n_scnum != 0)
-	*addendp -= sym->n_value;
-    }
-
-  if (rel->r_type == MIPS_R_RVA)
-    *addendp -= pe_data (sec->output_section->owner)->pe_opthdr.ImageBase;
-#endif
-
-  return howto;
-}
-
-#define coff_rtype_to_howto	    coff_mips_rtype_to_howto
-#define coff_bfd_reloc_type_lookup  coff_mips_reloc_type_lookup
-#define coff_bfd_reloc_name_lookup coff_mips_reloc_name_lookup
-
-/* Get the howto structure for a generic reloc type.  */
-
-static reloc_howto_type *
-coff_mips_reloc_type_lookup (bfd *abfd ATTRIBUTE_UNUSED,
-			     bfd_reloc_code_real_type code)
-{
-  int mips_type;
-
-  switch (code)
-    {
-    case BFD_RELOC_16:
-      mips_type = MIPS_R_REFHALF;
-      break;
-    case BFD_RELOC_32:
-    case BFD_RELOC_CTOR:
-      mips_type = MIPS_R_REFWORD;
-      break;
-    case BFD_RELOC_MIPS_JMP:
-      mips_type = MIPS_R_JMPADDR;
-      break;
-    case BFD_RELOC_HI16_S:
-      mips_type = MIPS_R_REFHI;
-      break;
-    case BFD_RELOC_LO16:
-      mips_type = MIPS_R_REFLO;
-      break;
-    case BFD_RELOC_GPREL16:
-      mips_type = MIPS_R_GPREL;
-      break;
-    case BFD_RELOC_MIPS_LITERAL:
-      mips_type = MIPS_R_LITERAL;
-      break;
-    case BFD_RELOC_RVA:
-      mips_type = MIPS_R_RVA;
-      break;
-    default:
-      return NULL;
-    }
-
-  return & howto_table [mips_type];
-}
-
-static reloc_howto_type *
-coff_mips_reloc_name_lookup (bfd *abfd ATTRIBUTE_UNUSED,
-			     const char *r_name)
-{
-  unsigned int i;
-
-  for (i = 0; i < NUM_HOWTOS; i++)
-    if (howto_table[i].name != NULL
-	&& strcasecmp (howto_table[i].name, r_name) == 0)
-      return &howto_table[i];
-
-  return NULL;
-}
-
-static void
-mips_swap_reloc_in (bfd * abfd, void * src, void * dst)
-{
-  static struct internal_reloc pair_prev;
-  RELOC *reloc_src = (RELOC *) src;
-  struct internal_reloc *reloc_dst = (struct internal_reloc *) dst;
-
-  reloc_dst->r_vaddr = H_GET_32 (abfd, reloc_src->r_vaddr);
-  reloc_dst->r_symndx = H_GET_S32 (abfd, reloc_src->r_symndx);
-  reloc_dst->r_type = H_GET_16 (abfd, reloc_src->r_type);
-  reloc_dst->r_size = 0;
-  reloc_dst->r_extern = 0;
-  reloc_dst->r_offset = 0;
-
-  switch (reloc_dst->r_type)
-  {
-  case MIPS_R_REFHI:
-    pair_prev = *reloc_dst;
-    break;
-  case MIPS_R_PAIR:
-    reloc_dst->r_offset = reloc_dst->r_symndx;
-    if (reloc_dst->r_offset & 0x8000)
-      reloc_dst->r_offset -= 0x10000;
-    reloc_dst->r_symndx = pair_prev.r_symndx;
-    break;
-  }
-}
-
-static unsigned int
-mips_swap_reloc_out (bfd * abfd, void * src, void * dst)
-{
-  static bfd_vma prev_addr = 0;
-  struct internal_reloc *reloc_src = (struct internal_reloc *)src;
-  struct external_reloc *reloc_dst = (struct external_reloc *)dst;
-
-  switch (reloc_src->r_type)
-    {
-    case MIPS_R_REFHI:
-      prev_addr = reloc_src->r_vaddr;
-      break;
-    case MIPS_R_REFLO:
-      if (reloc_src->r_vaddr == prev_addr)
-	{
-	  /* FIXME: only slightly hackish.  If we see a REFLO pointing to
-	     the same address as a REFHI, we assume this is the matching
-	     PAIR reloc and output it accordingly.  The symndx is really
-	     the low 16 bits of the addend */
-	  H_PUT_32 (abfd, reloc_src->r_vaddr, reloc_dst->r_vaddr);
-	  H_PUT_32 (abfd, reloc_src->r_symndx, reloc_dst->r_symndx);
-	  H_PUT_16 (abfd, MIPS_R_PAIR, reloc_dst->r_type);
-	  return RELSZ;
-	}
-      break;
-    }
-
-  H_PUT_32 (abfd, reloc_src->r_vaddr, reloc_dst->r_vaddr);
-  H_PUT_32 (abfd, reloc_src->r_symndx, reloc_dst->r_symndx);
-
-  H_PUT_16 (abfd, reloc_src->r_type, reloc_dst->r_type);
-  return RELSZ;
-}
-
-#define coff_swap_reloc_in   mips_swap_reloc_in
-#define coff_swap_reloc_out  mips_swap_reloc_out
-#define NO_COFF_RELOCS
-
-static bfd_boolean
-coff_pe_mips_relocate_section (bfd *output_bfd,
-			       struct bfd_link_info *info,
-			       bfd *input_bfd,
-			       asection *input_section,
-			       bfd_byte *contents,
-			       struct internal_reloc *relocs,
-			       struct internal_syment *syms,
-			       asection **sections)
-{
-  struct internal_reloc *rel;
-  struct internal_reloc *rel_end;
-  unsigned int i;
-
-  if (bfd_link_relocatable (info))
-    {
-      _bfd_error_handler
-	(_("%pB: `ld -r' not supported with PE MIPS objects"), input_bfd);
-      bfd_set_error (bfd_error_bad_value);
-      return FALSE;
-    }
-
-  BFD_ASSERT (input_bfd->xvec->byteorder
-	      == output_bfd->xvec->byteorder);
-
-  rel = relocs;
-  rel_end = rel + input_section->reloc_count;
-
-  for (i = 0; rel < rel_end; rel++, i++)
-    {
-      long symndx;
-      struct coff_link_hash_entry *h;
-      struct internal_syment *sym;
-      bfd_vma addend = 0;
-      bfd_vma val, tmp, targ, src, low;
-      reloc_howto_type *howto;
-      unsigned char *mem = contents + rel->r_vaddr;
-
-      symndx = rel->r_symndx;
-
-      if (symndx == -1)
-	{
-	  h = NULL;
-	  sym = NULL;
-	}
-      else
-	{
-	  h = obj_coff_sym_hashes (input_bfd)[symndx];
-	  sym = syms + symndx;
-	}
-
-      /* COFF treats common symbols in one of two ways.  Either the
-	 size of the symbol is included in the section contents, or it
-	 is not.  We assume that the size is not included, and force
-	 the rtype_to_howto function to adjust the addend as needed.  */
-
-      if (sym != NULL && sym->n_scnum != 0)
-	addend = - sym->n_value;
-      else
-	addend = 0;
-
-      howto = bfd_coff_rtype_to_howto (input_bfd, input_section, rel, h,
-				       sym, &addend);
-      if (howto == NULL)
-	return FALSE;
-
-      /* If we are doing a relocatable link, then we can just ignore
-	 a PC relative reloc that is pcrel_offset.  It will already
-	 have the correct value.  If this is not a relocatable link,
-	 then we should ignore the symbol value.  */
-      if (howto->pc_relative && howto->pcrel_offset)
-	{
-	  if (bfd_link_relocatable (info))
-	    continue;
-	  if (sym != NULL && sym->n_scnum != 0)
-	    addend += sym->n_value;
-	}
-
-      val = 0;
-
-      if (h == NULL)
-	{
-	  asection *sec;
-
-	  if (symndx == -1)
-	    {
-	      sec = bfd_abs_section_ptr;
-	      val = 0;
-	    }
-	  else
-	    {
-	      sec = sections[symndx];
-	      val = (sec->output_section->vma
-		     + sec->output_offset
-		     + sym->n_value);
-	      if (! obj_pe (input_bfd))
-		val -= sec->vma;
-	    }
-	}
-      else
-	{
-	  if (h->root.type == bfd_link_hash_defined
-	      || h->root.type == bfd_link_hash_defweak)
-	    {
-	      asection *sec;
-
-	      sec = h->root.u.def.section;
-	      val = (h->root.u.def.value
-		     + sec->output_section->vma
-		     + sec->output_offset);
-	      }
-
-	  else if (! bfd_link_relocatable (info))
-	    (*info->callbacks->undefined_symbol)
-	      (info, h->root.root.string, input_bfd, input_section,
-	       rel->r_vaddr - input_section->vma, TRUE);
-	}
-
-      src = rel->r_vaddr + input_section->output_section->vma
-	+ input_section->output_offset;
-
-      /* OK, at this point the following variables are set up:
-	   src = VMA of the memory we're fixing up
-	   mem = pointer to memory we're fixing up
-	   val = VMA of what we need to refer to.  */
-
-#define UI(x)						       \
-      /* xgettext:c-format */				       \
-	_bfd_error_handler (_("%pB: unimplemented %s"),	       \
-			    input_bfd, x);		       \
-	bfd_set_error (bfd_error_bad_value);
-
-      switch (rel->r_type)
-	{
-	case MIPS_R_ABSOLUTE:
-	  /* Ignore these.  */
-	  break;
-
-	case MIPS_R_REFHALF:
-	  UI ("refhalf");
-	  break;
-
-	case MIPS_R_REFWORD:
-	  tmp = bfd_get_32 (input_bfd, mem);
-	  /* printf ("refword: src=%08x targ=%08x+%08x\n", src, tmp, val); */
-	  tmp += val;
-	  bfd_put_32 (input_bfd, tmp, mem);
-	  break;
-
-	case MIPS_R_JMPADDR:
-	  tmp = bfd_get_32 (input_bfd, mem);
-	  targ = val + (tmp & 0x03ffffff) * 4;
-	  if ((src & 0xf0000000) != (targ & 0xf0000000))
-	    {
-	      _bfd_error_handler (_("%pB: jump too far away"), input_bfd);
-	      bfd_set_error (bfd_error_bad_value);
-	      return FALSE;
-	    }
-	  tmp &= 0xfc000000;
-	  tmp |= (targ / 4) & 0x3ffffff;
-	  bfd_put_32 (input_bfd, tmp, mem);
-	  break;
-
-	case MIPS_R_REFHI:
-	  tmp = bfd_get_32 (input_bfd, mem);
-	  switch (rel[1].r_type)
-	    {
-	    case MIPS_R_PAIR:
-	      /* MS PE object */
-	      targ = val + rel[1].r_offset + ((tmp & 0xffff) << 16);
-	      break;
-	    case MIPS_R_REFLO:
-	      /* GNU COFF object */
-	      low = bfd_get_32 (input_bfd, contents + rel[1].r_vaddr);
-	      low &= 0xffff;
-	      if (low & 0x8000)
-		low -= 0x10000;
-	      targ = val + low + ((tmp & 0xffff) << 16);
-	      break;
-	    default:
-	      _bfd_error_handler (_("%pB: bad pair/reflo after refhi"),
-				  input_bfd);
-	      bfd_set_error (bfd_error_bad_value);
-	      return FALSE;
-	    }
-	  tmp &= 0xffff0000;
-	  tmp |= (targ >> 16) & 0xffff;
-	  bfd_put_32 (input_bfd, tmp, mem);
-	  break;
-
-	case MIPS_R_REFLO:
-	  tmp = bfd_get_32 (input_bfd, mem);
-	  targ = val + (tmp & 0xffff);
-	  /* printf ("refword: src=%08x targ=%08x\n", src, targ); */
-	  tmp &= 0xffff0000;
-	  tmp |= targ & 0xffff;
-	  bfd_put_32 (input_bfd, tmp, mem);
-	  break;
-
-	case MIPS_R_GPREL:
-	case MIPS_R_LITERAL:
-	  UI ("gprel");
-	  break;
-
-	case MIPS_R_SECTION:
-	  UI ("section");
-	  break;
-
-	case MIPS_R_SECREL:
-	  UI ("secrel");
-	  break;
-
-	case MIPS_R_SECRELLO:
-	  UI ("secrello");
-	  break;
-
-	case MIPS_R_SECRELHI:
-	  UI ("secrelhi");
-	  break;
-
-	case MIPS_R_RVA:
-	  tmp = bfd_get_32 (input_bfd, mem);
-	  /* printf ("rva: src=%08x targ=%08x+%08x\n", src, tmp, val); */
-	  tmp += val
-	    - pe_data (input_section->output_section->owner)->pe_opthdr.ImageBase;
-	  bfd_put_32 (input_bfd, tmp, mem);
-	  break;
-
-	case MIPS_R_PAIR:
-	  /* ignore these */
-	  break;
-	}
-    }
-
-  return TRUE;
-}
-
-#define coff_relocate_section coff_pe_mips_relocate_section
-
-#ifdef TARGET_UNDERSCORE
-
-/* If mips gcc uses underscores for symbol names, then it does not use
-   a leading dot for local labels, so if TARGET_UNDERSCORE is defined
-   we treat all symbols starting with L as local.  */
-
-static bfd_boolean
-coff_mips_is_local_label_name (bfd *abfd, const char *name)
-{
-  if (name[0] == 'L')
-    return TRUE;
-
-  return _bfd_coff_is_local_label_name (abfd, name);
-}
-
-#define coff_bfd_is_local_label_name coff_mips_is_local_label_name
-
-#endif /* TARGET_UNDERSCORE */
-
-#define COFF_NO_HACK_SCNHDR_SIZE
-
-#ifndef bfd_pe_print_pdata
-#define bfd_pe_print_pdata	NULL
-#endif
-
-#include "coffcode.h"
-
-const bfd_target
-#ifdef TARGET_SYM
-  TARGET_SYM =
-#else
-  mips_pe_le_vec =
-#endif
-{
-#ifdef TARGET_NAME
-  TARGET_NAME,
-#else
-  "pe-mips",			/* Name.  */
-#endif
-  bfd_target_coff_flavour,
-  BFD_ENDIAN_LITTLE,		/* Data byte order is little.  */
-  BFD_ENDIAN_LITTLE,		/* Header byte order is little.  */
-
-  (HAS_RELOC | EXEC_P		/* Object flags.  */
-   | HAS_LINENO | HAS_DEBUG
-   | HAS_SYMS | HAS_LOCALS | WP_TEXT | D_PAGED),
-
-#ifndef COFF_WITH_PE
-  (SEC_HAS_CONTENTS | SEC_ALLOC | SEC_LOAD | SEC_RELOC /* Section flags.  */
-   | SEC_CODE | SEC_DATA),
-#else
-  (SEC_HAS_CONTENTS | SEC_ALLOC | SEC_LOAD | SEC_RELOC /* Section flags.  */
-   | SEC_CODE | SEC_DATA
-   | SEC_LINK_ONCE | SEC_LINK_DUPLICATES),
-#endif
-
-#ifdef TARGET_UNDERSCORE
-  TARGET_UNDERSCORE,		/* Leading underscore.  */
-#else
-  0,				/* leading underscore */
-#endif
-  '/',				/* AR_pad_char.  */
-  15,				/* AR_max_namelen.  */
-  0,				/* match priority.  */
-
-  bfd_getl64, bfd_getl_signed_64, bfd_putl64,
-     bfd_getl32, bfd_getl_signed_32, bfd_putl32,
-     bfd_getl16, bfd_getl_signed_16, bfd_putl16, /* Data.  */
-  bfd_getl64, bfd_getl_signed_64, bfd_putl64,
-     bfd_getl32, bfd_getl_signed_32, bfd_putl32,
-     bfd_getl16, bfd_getl_signed_16, bfd_putl16, /* Headers.  */
-
-  /* Note that we allow an object file to be treated as a core file as well.  */
-  {				/* bfd_check_format.  */
-    _bfd_dummy_target,
-    coff_object_p,
-    bfd_generic_archive_p,
-    coff_object_p
-  },
-  {				/* bfd_set_format.  */
-    _bfd_bool_bfd_false_error,
-    coff_mkobject,
-    _bfd_generic_mkarchive,
-    _bfd_bool_bfd_false_error
-  },
-  {				/* bfd_write_contents.  */
-    _bfd_bool_bfd_false_error,
-    coff_write_object_contents,
-    _bfd_write_archive_contents,
-    _bfd_bool_bfd_false_error
-  },
-
-  BFD_JUMP_TABLE_GENERIC (coff),
-  BFD_JUMP_TABLE_COPY (coff),
-  BFD_JUMP_TABLE_CORE (_bfd_nocore),
-  BFD_JUMP_TABLE_ARCHIVE (_bfd_archive_coff),
-  BFD_JUMP_TABLE_SYMBOLS (coff),
-  BFD_JUMP_TABLE_RELOCS (coff),
-  BFD_JUMP_TABLE_WRITE (coff),
-  BFD_JUMP_TABLE_LINK (coff),
-  BFD_JUMP_TABLE_DYNAMIC (_bfd_nodynamic),
-
-  NULL,
-
-  COFF_SWAP_TABLE
-};
diff --git a/bfd/pei-mips.c b/bfd/pei-mips.c
deleted file mode 100644
index 9661a82bb84..00000000000
--- a/bfd/pei-mips.c
+++ /dev/null
@@ -1,32 +0,0 @@
-/* BFD back-end for MIPS PE IMAGE COFF files.
-   Copyright (C) 1995-2018 Free Software Foundation, Inc.
-
-   This file is part of BFD, the Binary File Descriptor library.
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 3 of the License, or
-   (at your option) any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston,
-   MA 02110-1301, USA.  */
-
-#include "sysdep.h"
-#include "bfd.h"
-
-#define TARGET_SYM mips_pei_le_vec
-#define TARGET_NAME "pei-mips"
-#define COFF_IMAGE_WITH_PE
-#define PCRELOFFSET TRUE
-/* Long section names not allowed in executable images, only object files.  */
-#define COFF_LONG_SECTION_NAMES 0
-
-#include "pe-mips.c"
-
diff --git a/bfd/po/SRC-POTFILES.in b/bfd/po/SRC-POTFILES.in
index f7ce38726c9..77086012652 100644
--- a/bfd/po/SRC-POTFILES.in
+++ b/bfd/po/SRC-POTFILES.in
@@ -24,7 +24,6 @@ coff-arm.c
 coff-bfd.c
 coff-go32.c
 coff-i386.c
-coff-mips.c
 coff-rs6000.c
 coff-sh.c
 coff-stgo32.c
@@ -259,7 +258,6 @@ mach-o-x86-64.c
 mach-o.c
 mach-o.h
 merge.c
-mipsbsd.c
 mmo.c
 netbsd-core.c
 netbsd.h
@@ -273,7 +271,6 @@ pe-arm-wince.c
 pe-arm.c
 pe-i386.c
 pe-mcore.c
-pe-mips.c
 pe-ppc.c
 pe-sh.c
 pe-x86_64.c
@@ -285,7 +282,6 @@ pei-arm.c
 pei-i386.c
 pei-ia64.c
 pei-mcore.c
-pei-mips.c
 pei-ppc.c
 pei-sh.c
 pei-x86_64.c
diff --git a/bfd/targets.c b/bfd/targets.c
index c03efe0ee6f..3deabb52651 100644
--- a/bfd/targets.c
+++ b/bfd/targets.c
@@ -702,11 +702,6 @@ extern const bfd_target mep_elf32_le_vec;
 extern const bfd_target metag_elf32_vec;
 extern const bfd_target microblaze_elf32_vec;
 extern const bfd_target microblaze_elf32_le_vec;
-extern const bfd_target mips_aout_be_vec;
-extern const bfd_target mips_aout_le_vec;
-extern const bfd_target mips_ecoff_be_vec;
-extern const bfd_target mips_ecoff_le_vec;
-extern const bfd_target mips_ecoff_bele_vec;
 extern const bfd_target mips_elf32_be_vec;
 extern const bfd_target mips_elf32_le_vec;
 extern const bfd_target mips_elf32_n_be_vec;
@@ -727,8 +722,6 @@ extern const bfd_target mips_elf64_trad_be_vec;
 extern const bfd_target mips_elf64_trad_le_vec;
 extern const bfd_target mips_elf64_tradfbsd_be_vec;
 extern const bfd_target mips_elf64_tradfbsd_le_vec;
-extern const bfd_target mips_pe_le_vec;
-extern const bfd_target mips_pei_le_vec;
 extern const bfd_target mmix_elf64_vec;
 extern const bfd_target mmix_mmo_vec;
 extern const bfd_target mn10200_elf32_vec;
@@ -1078,14 +1071,6 @@ static const bfd_target * const _bfd_target_vector[] =
 
 	&microblaze_elf32_vec,
 
-#if 0
-	/* No one seems to use this.  */
-	&mips_aout_be_vec,
-#endif
-	&mips_aout_le_vec,
-	&mips_ecoff_be_vec,
-	&mips_ecoff_le_vec,
-	&mips_ecoff_bele_vec,
 #ifdef BFD64
 	&mips_elf32_be_vec,
 	&mips_elf32_le_vec,
@@ -1108,8 +1093,6 @@ static const bfd_target * const _bfd_target_vector[] =
 	&mips_elf64_tradfbsd_be_vec,
 	&mips_elf64_tradfbsd_le_vec,
 #endif
-	&mips_pe_le_vec,
-	&mips_pei_le_vec,
 
 #ifdef BFD64
 	&mmix_elf64_vec,