path: root/eclass/toolchain.eclass

# Copyright 1999-2004 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
# $Header: /var/cvsroot/gentoo-x86/eclass/toolchain.eclass,v 1.17 2004/09/15 18:05:24 lv Exp $
#
# This eclass should contain general toolchain-related functions that are
# expected to not change, or change much.

inherit eutils versionator
ECLASS=toolchain
INHERITED="$INHERITED $ECLASS"
DESCRIPTION="Based on the ${ECLASS} eclass"
EXPORT_FUNCTIONS src_unpack pkg_setup src_compile src_install

[ ! -n "${CCHOST}" ] && export CCHOST="${CHOST}"

if [ "${ETYPE}" == "gcc-library" ] ; then
	IUSE="nls build uclibc"
	if [ -n "${SO_VERSION_SLOT}" ] ; then
		if [ "${CHOST}" == "${CCHOST}" ] ; then
			SLOT="5"
		else
			SLOT="${CCHOST}-5"
		fi
	fi
else
	IUSE="static nls bootstrap build nomultilib gcj gtk f77 objc hardened uclibc n32 n64"
	if [ "${CHOST}" == "${CCHOST}" ] ; then
		SLOT="${PV%.*}"
	else
		SLOT="${CCHOST}-${PV%.*}"
	fi
fi


gcc_setup_static_vars() {
	#MY_PV="`echo ${PV} | awk -F. '{ gsub(/_pre.*|_alpha.*/, ""); print $1 "." $2 }'`"
	#MY_PV_FULL="`echo ${PV} | awk '{ gsub(/_pre.*|_alpha.*/, ""); print $0 }'`"

	MY_PV_FULL="$(get_version_component_range 1-3)"
	MY_PV="$(get_version_component_range 1-2)"

	MAIN_BRANCH="${PV}"  # Tarball, etc used ...

	# Pre-release support
	if [ ${PV} != ${PV/_pre/-} ] ; then
		PRERELEASE=${PV/_pre/-}
	fi

	# Theoretical cross compiler support
	[ ! -n "${CCHOST}" ] && export CCHOST="${CHOST}"

	GCCMAJOR="$(get_version_component_range 1)"
	GCCMINOR="$(get_version_component_range 2)"
	GCCMICRO="$(get_version_component_range 3)"
}


gcc_setup_path_vars() {
	PREFIX="${PREFIX:="/usr"}"

	if [ "$1" == "versioned" ] ; then
	  # GCC 3.4 no longer uses gcc-lib.
	  LIBPATH="${LIBPATH:="${PREFIX}/lib/gcc/${CCHOST}/${MY_PV_FULL}"}"
	  INCLUDEPATH="${INCLUDEPATH:="${LIBPATH}/include"}"
	  BINPATH="${BINPATH:="${PREFIX}/${CCHOST}/gcc-bin/${MY_PV}"}"
	  DATAPATH="${DATAPATH:="${PREFIX}/share/gcc-data/${CCHOST}/${MY_PV}"}"
	  # Dont install in /usr/include/g++-v3/, but in gcc internal directory.
	  # We will handle /usr/include/g++-v3/ with gcc-config ...
	  STDCXX_INCDIR="${STDCXX_INCDIR:="${LIBPATH}/include/g++-v${MY_PV/\.*/}"}"
	elif [ "$1" == "non-versioned" ] ; then
	  # using non-versioned directories to install gcc, like what is currently
	  # done for ppc64 and 3.3.3_pre, is a BAD IDEA. DO NOT do it!! However...
	  # setting up variables for non-versioned directories might be useful for
	  # specific gcc targets, like libffi. Note that we dont override the value
	  # returned by get_libdir here.
	  LIBPATH="${LIBPATH:="${PREFIX}/$(get_libdir)"}"
	  INCLUDEPATH="${INCLUDEPATH:="${PREFIX}/include"}"
	  BINPATH="${BINPATH:="${PREFIX}/bin/"}"
	  DATAPATH="${DATAPATH:="${PREFIX}/share/"}"
	  STDCXX_INCDIR="${STDCXX_INCDIR:="${PREFIX}/include/g++-v3/"}"
	else
	  die "this function needs to be called with versioned of non-versioned"
	fi
}


gcc_setup_variables() {
	if [ "${ETYPE}" == "gcc-library" ] ; then
		GCC_VAR_TYPE="${GCC_VAR_TYPE:=non-versioned}"
		GCC_LIB_COMPAT_ONLY="${GCC_LIB_COMPAT_ONLY:=true}"
		GCC_TARGET_NO_MULTILIB="${GCC_TARGET_NO_MULTILIB:=true}"
	else
		GCC_VAR_TYPE="${GCC_VAR_TYPE:=versioned}"
		GCC_LIB_COMPAT_ONLY="false"
		GCC_TARGET_NO_MULTILIB="${GCC_TARGET_NO_MULTILIB:=false}"
	fi
	gcc_setup_path_vars ${GCC_VAR_TYPE}

	# if this value isnt set, lets assume that we're building a target that
	# only requires support for c.
	GCC_LANG="${GCC_LANG:=c}"
}


gcc-compiler-pkg_setup() {
	# Must compile for mips64-linux target if we want n32/n64 support
	case "${CCHOST}" in
		mips64-*)
		;;
		*)
		    if use n32 || use n64; then
		     eerror "n32/n64 can only be used when target host is mips64-*-linux-*";
		     die "Invalid USE flags for CCHOST ($CCHOST)";
		    fi
		;;
	esac

	#cannot have both n32 & n64 without multilib
	if use n32 && use n64 && use nomultilib; then
		eerror "Please disable nomultilib if you want to use both n32 & n64";
		die "Invalid USE flag combination";
	fi
}

gcc-library-pkg_setup() {
	:
}

gcc_pkg_setup() {
	gcc_setup_static_vars
	gcc_setup_variables

	${ETYPE}-pkg_setup || die "${ETYPE}-pkg_setup failed"
}


# This function handles the basics of setting the SRC_URI for a gcc ebuild.
# To use, set SRC_URI with:
#
#	SRC_URI="$(get_gcc_src_uri)"
#
# Other than the variables normally set by portage, this function's behavior
# can be altered by setting the following:
#
#	GENTOO_TOOLCHAIN_BASE_URI
#			This sets the base URI for all gentoo-specific patch files. Note
#			that this variable is only important for a brief period of time,
#			before your source files get picked up by mirrors. However, it is
#			still highly suggested that you keep files in this location
#			available.
#
#	SNAPSHOT
#			If set, this variable signals that we should be using a snapshot
#			of gcc from ftp://sources.redhat.com/pub/gcc/snapshots/. It is
#			expected to be in the format "YYYY-MM-DD". Note that if the ebuild
#			has a _pre suffix, this variable is ignored and the prerelease
#			tarball is used instead.
#
#	BRANCH_UPDATE
#			If set, this variable signals that we should be using the main
#			release tarball (determined by ebuild version) and applying a
#			CVS branch update patch against it. The location of this branch
#			update patch is assumed to be in ${GENTOO_TOOLCHAIN_BASE_URI}.
#			Just like with SNAPSHOT, this variable is ignored if the ebuild
#			has a _pre suffix.
#
#	PATCH_VER
#			This should be set to the version of the gentoo patch tarball.
#			The resulting filename of this tarball will be:
#			${P}-patches-${PATCH_VER}.tar.bz2
#
#	PIE_VER
#	PIE_CORE
#			These variables control patching in various updates for the logic
#			controlling Position Independant Executables. PIE_VER is expected
#			to be the version of this patch, and PIE_CORE the actual filename
#			of the patch. An example:
#					PIE_VER="8.7.6.5"
#					PIE_CORE="gcc-3.4.0-piepatches-v${PIE_VER}.tar.bz2"
#
#	PP_VER
#	PP_FVER
#			These variables control patching in stack smashing protection
#			support. They both control the version of ProPolice to download.
#			PP_VER sets the version of the directory in which to find the
#			patch, and PP_FVER sets the version of the patch itself. For
#			example:
#					PP_VER="3_4"
#					PP_FVER="${PP_VER//_/.}-2"
#			would download gcc3_4/protector-3.4-2.tar.gz
#
#	GCC_MANPAGE_VERSION
#			The version of gcc for which we will download manpages. This will
#			default to ${PV}, but we may not want to pre-generate man pages
#			for prerelease test ebuilds for example. This allows you to
#			continue using pre-generated manpages from the last stable release.
#			If set to "none", this will prevent the downloading of manpages,
#			which is useful for individual library targets.
#
# Travis Tilley <lv@gentoo.org> (02 Sep 2004)
#
get_gcc_src_uri() {
	# This variable should be set to the devspace of whoever is currently
	# maintaining GCC. Please dont set this to mirror, that would just
	# make the files unavailable until they get mirrored.
	local devspace_uri="http://dev.gentoo.org/~lv/toolchain-files/"
	GENTOO_TOOLCHAIN_BASE_URI=${GENTOO_TOOLCHAIN_BASE_URI:=${devspace_uri}}

	gcc_setup_static_vars

	if [ -n "${PIE_VER}" ] ; then
		PIE_CORE="${PIE_CORE:=gcc-${MY_PV_FULL}-piepatches-v${PIE_VER}.tar.bz2}"
	fi

	GCC_MANPAGE_VERSION="${GCC_MANPAGE_VERSION:=${MY_PV_FULL}}"


	# Set where to download gcc itself depending on whether we're using a
	# prerelease, snapshot, or release tarball.
	if [ -n "${PRERELEASE}" ] ; then
		GCC_SRC_URI="ftp://gcc.gnu.org/pub/gcc/prerelease-${PRERELEASE}/gcc-${PRERELEASE}.tar.bz2"
	elif [ -n "${SNAPSHOT}" ] ; then
		GCC_SRC_URI="ftp://sources.redhat.com/pub/gcc/snapshots/${SNAPSHOT}/gcc-${SNAPSHOT//-}.tar.bz2"
	else
		GCC_SRC_URI="ftp://gcc.gnu.org/pub/gcc/releases/${P}/gcc-${MAIN_BRANCH}.tar.bz2"
		# we want all branch updates to be against the main release
		if [ -n "${BRANCH_UPDATE}" ] ; then
			GCC_SRC_URI="${GCC_SRC_URI}
				${GENTOO_TOOLCHAIN_BASE_URI}/${PN}-${MAIN_BRANCH}-branch-update-${BRANCH_UPDATE}.patch.bz2"
		fi
	fi

	# propolice aka stack smashing protection
	if [ -n "${PP_VER}" ] ; then
	GCC_SRC_URI="${GCC_SRC_URI}
		http://www.research.ibm.com/trl/projects/security/ssp/gcc${PP_VER}/protector-${PP_FVER}.tar.gz"
	fi

	# PERL cannot be present at bootstrap, and is used to build the man pages.
	# So... lets include some pre-generated ones, shall we?
	if [ "${GCC_MANPAGE_VERSION}" != "none" ] ; then
		GCC_SRC_URI="${GCC_SRC_URI}
			${GENTOO_TOOLCHAIN_BASE_URI}/gcc-${GCC_MANPAGE_VERSION}-manpages.tar.bz2"
	fi

	# various gentoo patches
	if [ -n "${PATCH_VER}" ] ; then
		GCC_SRC_URI="${GCC_SRC_URI}
			${GENTOO_TOOLCHAIN_BASE_URI}/${P}-patches-${PATCH_VER}.tar.bz2"
	fi

	# mmm... PIE =D
	if [ -n "${PIE_CORE}" ] ; then
		GCC_SRC_URI="${GCC_SRC_URI}
			${GENTOO_TOOLCHAIN_BASE_URI}${PIE_CORE}"
	fi

	echo "${GCC_SRC_URI}"
}


# This function sets the source directory depending on whether we're using
# a prerelease, snapshot, or release tarball. To use it, just set S with:
#
#	S="$(gcc_get_s_dir)"
#
# Travis Tilley <lv@gentoo.org> (03 Sep 2004)
#
gcc_get_s_dir() {
	if [ -n "${PRERELEASE}" ] ; then
		GCC_S="${WORKDIR}/gcc-${PRERELEASE}"
	elif [ -n "${SNAPSHOT}" ] ; then
		GCC_S="${WORKDIR}/gcc-${SNAPSHOT//-}"
	else
		GCC_S="${WORKDIR}/gcc-${MAIN_BRANCH}"
	fi

	echo "${GCC_S}"
}


# gcc_quick_unpack will unpack the gcc tarball and patches in a way that is
# consistant with the behavior of get_gcc_src_uri. The only patch it applies
# itself is the branch update if present.
#
# Travis Tilley <lv@gentoo.org> (03 Sep 2004)
#
gcc_quick_unpack() {
	pushd ${WORKDIR} > /dev/null
	gcc_setup_static_vars

	if [ -n "${PRERELEASE}" ] ; then
		unpack gcc-${PRERELEASE}.tar.bz2
	elif [ -n "${SNAPSHOT}" ] ; then
		unpack gcc-${SNAPSHOT//-}.tar.bz2
	else
		unpack gcc-${MAIN_BRANCH}.tar.bz2
		# We want branch updates to be against a release tarball
		if [ -n "${BRANCH_UPDATE}" ] ; then
			pushd ${S:="$(gcc_get_s_dir)"} > /dev/null
			epatch ${DISTDIR}/gcc-${MAIN_BRANCH}-branch-update-${BRANCH_UPDATE}.patch.bz2
			popd > /dev/null
		fi
	fi

	if [ -n "${PATCH_VER}" ]
	then
		unpack ${P}-patches-${PATCH_VER}.tar.bz2
	fi

	if [ -n "${PP_VER}" ]
	then
		# The gcc 3.4 propolice versions are meant to be unpacked to ${S}
		pushd ${S:="$(gcc_get_s_dir)"} > /dev/null
		unpack protector-${PP_FVER}.tar.gz
		popd > /dev/null
	fi

	if [ -n "${PIE_VER}" ]
	then
		unpack ${PIE_CORE}
	fi

	popd > /dev/null
}


# Exclude any unwanted patches, as specified by the following variables:
#
#	GENTOO_PATCH_EXCLUDE
#			List of filenames, relative to ${WORKDIR}/patch/
#
#	PIEPATCH_EXCLUDE
#			List of filenames, relative to ${WORKDIR}/piepatch/
#
# Travis Tilley <lv@gentoo.org> (03 Sep 2004)
#
exclude_gcc_patches() {
	local i
	for i in ${GENTOO_PATCH_EXCLUDE} ; do
		if [ -f ${WORKDIR}/patch/${i} ] ; then
			einfo "Excluding patch ${i}"
			rm -f ${WORKDIR}/patch/${i} || die "failed to delete ${i}"
		fi
	done
	for i in ${PIEPATCH_EXCLUDE} ; do
		if [ -f ${WORKDIR}/piepatch/${i} ] ; then
			einfo "Excluding piepatch ${i}"
			rm -f ${WORKDIR}/piepatch/${i} || die "failed to delete ${i}"
		fi
	done
}


# patch in ProPolice Stack Smashing protection
do_gcc_SSP_patches() {
	local ssppatch
	local sspdocs

	if  [ ${GCCMAJOR} -lt 3 ] ; then
		die "gcc version not supported by do_gcc_SSP_patches"
	elif [ ${GCCMAJOR} -eq 3 -a ${GCCMINOR} -lt 2 ] ; then
		die "gcc version not supported by do_gcc_SSP_patches"
	elif [ ${GCCMAJOR} -eq 3 -a ${GCCMINOR} -eq 2 ] && [ ${GCCMICRO} -lt 3 ] ; then
		die "gcc version not supported by do_gcc_SSP_patches"
	fi

	# Etoh keeps changing where files are and what the patch is named
	if [ "${GCCMINOR}" -lt "4" ] ; then
		# earlier versions have no directory structure or docs
		mv ${S}/protector.{c,h} ${S}/gcc
		ssppatch="${S}/protector.dif"
		sspdocs="no"
	elif [ "${GCCMINOR}" -eq "4" -a ${PP_VER} == "3_4" ] ; then
		# >3.4 put files where they belong and 3_4 uses old patch name
		ssppatch="${S}/protector.dif"
		sspdocs="no"
	else
		# >3.4.1 uses version in patch name, and also includes docs
		ssppatch="${S}/gcc_${PP_VER}.dif"
		sspdocs="yes"
	fi

	epatch ${ssppatch}

	if [ "${PN}" == "gcc" -a "${sspdocs}" == "no" ] ; then
		epatch ${FILESDIR}/pro-police-docs.patch
	fi

	# we apply only the needed parts of protectonly.dif
	sed -e 's|^CRTSTUFF_CFLAGS = |CRTSTUFF_CFLAGS = -fno-stack-protector-all |' \
		-i gcc/Makefile.in || die "Failed to update crtstuff!"

	# if gcc in a stage3 defaults to ssp, is version 3.4.0 and a stage1 is built
	# the build fails building timevar.o w/:
	# cc1: stack smashing attack in function ix86_split_to_parts()
	if gcc -dumpspecs | grep -q "fno-stack-protector:" && [ "${GCCMINOR}" -ge "4" ] && [ -f ${FILESDIR}/3.4.0/gcc-3.4.0-cc1-no-stack-protector.patch ] ; then
		use build && epatch ${FILESDIR}/3.4.0/gcc-3.4.0-cc1-no-stack-protector.patch
	fi

	release_version="${release_version}, ssp-${PP_FVER}"
	update_gcc_for_libc_ssp
}


# If glibc or uclibc has been patched to provide the necessary symbols itself,
# then lets use those for SSP instead of libgcc.
update_gcc_for_libc_ssp() {
	if libc_has_ssp ; then
		einfo "Updating gcc to use SSP from libc..."
		sed -e 's|^\(LIBGCC2_CFLAGS.*\)$|\1 -D_LIBC_PROVIDES_SSP_|' \
			-i ${S}/gcc/Makefile.in || die "Failed to update gcc!"
	fi
}


# do various updates to PIE logic
do_gcc_PIE_patches() {
	# corrects startfile/endfile selection and shared/static/pie flag usage
	epatch ${WORKDIR}/piepatch/upstream
	# adds non-default pie support (rs6000)
	epatch ${WORKDIR}/piepatch/nondef
	# adds default pie support (rs6000 too) if DEFAULT_PIE[_SSP] is defined
	epatch ${WORKDIR}/piepatch/def
	# disable relro/now
	#use uclibc && epatch ${FILESDIR}/3.3.3/gcc-3.3.3-norelro.patch

	release_version="${release_version}, pie-${PIE_VER}"
}


# configure to build hardened GCC
make_gcc_hard() {
	einfo "Updating gcc to use automatic PIE + SSP building ..."
	sed -e 's|^ALL_CFLAGS = |ALL_CFLAGS = -DEFAULT_PIE_SSP |' \
		-i ${S}/gcc/Makefile.in || die "Failed to update gcc!"

	# rebrand to make bug reports easier
	release_version="${release_version/Gentoo/Gentoo Hardened}"
}


create_vanilla_specs_file() {
	pushd ${WORKDIR}/build/gcc > /dev/null
	if use hardened ; then
		# if using hardened, then we need to move xgcc out of the way
		# and recompile it
		cp Makefile Makefile.orig
		sed -i -e 's#ALL_CFLAGS = -DEFAULT_PIE_SSP#ALL_CFLAGS = #' Makefile
		mv xgcc xgcc.hard
		mv gcc.o gcc.o.hard
		make xgcc
		einfo "Creating a vanilla gcc specs file"
		./xgcc -dumpspecs > ${WORKDIR}/build/vanilla.specs
		# restore everything to normal
		mv gcc.o.hard gcc.o
		mv xgcc.hard xgcc
		mv Makefile.orig Makefile
	else
		einfo "Creating a vanilla gcc specs file"
		./xgcc -dumpspecs > ${WORKDIR}/build/vanilla.specs
	fi
	popd > /dev/null
}


create_hardened_specs_file() {
	pushd ${WORKDIR}/build/gcc > /dev/null
	if use !hardened ; then
		# if not using hardened, then we need to move xgcc out of the way
		# and recompile it
		cp Makefile Makefile.orig
		sed -i -e 's#ALL_CFLAGS = #ALL_CFLAGS = -DEFAULT_PIE_SSP #' Makefile
		mv xgcc xgcc.vanilla
		mv gcc.o gcc.o.vanilla
		make xgcc
		einfo "Creating a hardened gcc specs file"
		./xgcc -dumpspecs > ${WORKDIR}/build/hardened.specs
		# restore everything to normal
		mv gcc.o.vanilla gcc.o
		mv xgcc.vanilla xgcc
		mv Makefile.orig Makefile
	else
		einfo "Creating a hardened gcc specs file"
		./xgcc -dumpspecs > ${WORKDIR}/build/hardened.specs
	fi
	popd > /dev/null
}


split_out_specs_files() {
	create_hardened_specs_file || die "failes to split out hardened specs"
	create_vanilla_specs_file || die "failed to split out vanilla specs"
}


# This function allows us to gentoo-ize gcc's version number and bugzilla
# URL without needing to use patches.
#
# Travis Tilley <lv@gentoo.org> (02 Sep 2004)
#
gcc_version_patch() {
	[ -z "$1" ] && die "no arguments to gcc_version_patch"

	sed -i -e 's~\(const char version_string\[\] = ".....\).*\(".*\)~\1 @GENTOO@\2~' ${S}/gcc/version.c || die "failed to add @GENTOO@"
	sed -i -e "s:@GENTOO@:$1:g" ${S}/gcc/version.c || die "failed to patch version"
	sed -i -e 's~http:\/\/gcc\.gnu\.org\/bugs\.html~http:\/\/bugs\.gentoo\.org\/~' ${S}/gcc/version.c || die "failed to update bugzilla URL"
}


# The purpose of this DISGUSTING gcc multilib hack is to allow 64bit libs
# to live in lib instead of lib64 where they belong, with 32bit libraries
# in lib32. This hack has been around since the beginning of the amd64 port,
# and we're only now starting to fix everything that's broken. Eventually
# this should go away.
#
# Travis Tilley <lv@gentoo.org> (03 Sep 2004)
#
disgusting_gcc_multilib_HACK() {
	einfo "updating multilib directories to be: $(get_libdir) and $(get_multilibdir)"
	sed -i -e 's~^MULTILIB_OSDIRNAMES.*~MULTILIB_OSDIRNAMES = ../'$(get_libdir)' ../'$(get_multilibdir)'~' ${S}/gcc/config/i386/t-linux64
}


hardened_gcc_works() {
	for myarch in ${HARDENED_GCC_WORKS}
	do
		[ "${ARCH}" == "${myarch}" ] && return 0
	done
	return 1
}


disable_multilib_libjava() {
	# We dont want a multilib libjava, so lets use this hack taken from fedora
	pushd ${S} > /dev/null
	sed -i -e 's/^all: all-redirect/ifeq (\$(MULTISUBDIR),)\nall: all-redirect\nelse\nall:\n\techo Multilib libjava build disabled\nendif/' libjava/Makefile.in
	sed -i -e 's/^install: install-redirect/ifeq (\$(MULTISUBDIR),)\ninstall: install-redirect\nelse\ninstall:\n\techo Multilib libjava install disabled\nendif/' libjava/Makefile.in
	sed -i -e 's/^check: check-redirect/ifeq (\$(MULTISUBDIR),)\ncheck: check-redirect\nelse\ncheck:\n\techo Multilib libjava check disabled\nendif/' libjava/Makefile.in
	sed -i -e 's/^all: all-recursive/ifeq (\$(MULTISUBDIR),)\nall: all-recursive\nelse\nall:\n\techo Multilib libjava build disabled\nendif/' libjava/Makefile.in
	sed -i -e 's/^install: install-recursive/ifeq (\$(MULTISUBDIR),)\ninstall: install-recursive\nelse\ninstall:\n\techo Multilib libjava install disabled\nendif/' libjava/Makefile.in
	sed -i -e 's/^check: check-recursive/ifeq (\$(MULTISUBDIR),)\ncheck: check-recursive\nelse\ncheck:\n\techo Multilib libjava check disabled\nendif/' libjava/Makefile.in
	popd > /dev/null
}


# generic GCC src_unpack, to be called from the ebuild's src_unpack.
# BIG NOTE regarding hardened support: ebuilds with support for hardened are
# expected to export the following variable:
#
#	HARDENED_GCC_WORKS
#			This variable should be set to the archs on which hardened should
#			be allowed. For example: HARDENED_GCC_WORKS="x86 sparc amd64"
#			This allows for additional archs to be supported by hardened when
#			ready.
#
# Travis Tilley <lv@gentoo.org> (03 Sep 2004)
#
gcc-compiler-src_unpack() {
	# fail if using pie patches, building hardened, and glibc doesnt have
	# the necessary support
	[ -n "${PIE_VER}" ] && use hardened && glibc_have_pie

	if use hardened && hardened_gcc_works ; then
		einfo "updating configuration to build hardened GCC"
		make_gcc_hard || die "failed to make gcc hard"
	fi
}
gcc-library-src_unpack() {
	:
}
gcc_src_unpack() {
	local release_version="Gentoo Linux ${PVR}"

	gcc_quick_unpack
	exclude_gcc_patches

	cd ${S:="$(gcc_get_s_dir)"}

	if [ -n "${PATCH_VER}" ] ; then
		epatch ${WORKDIR}/patch
	fi
	if [ "${ARCH}" != "hppa" -a "${ARCH}" != "hppa64" -a -n "${PP_VER}" ] ; then
		do_gcc_SSP_patches
	fi
	if [ -n "${PIE_VER}" ] ; then
		do_gcc_PIE_patches
	fi

	${ETYPE}-src_unpack || die "failed to ${ETYPE}-src_unpack"

	if use amd64 && [ -z "${SKIP_MULTILIB_HACK}" ] ; then
		disgusting_gcc_multilib_HACK || die "multilib hack failed"
	fi

	einfo "patching gcc version: ${BRANCH_UPDATE} (${release_version})"
	gcc_version_patch "${BRANCH_UPDATE} (${release_version})"

	# Misdesign in libstdc++ (Redhat)
	cp -a ${S}/libstdc++-v3/config/cpu/i{4,3}86/atomicity.h

	# disable --as-needed from being compiled into gcc specs
	# natively when using >=sys-devel/binutils-2.15.90.0.1 this is
	# done to keep our gcc backwards compatible with binutils. 
	# gcc 3.4.1 cvs has patches that need back porting.. 
	# http://gcc.gnu.org/bugzilla/show_bug.cgi?id=14992 (May 3 2004)
	sed -i -e s/HAVE_LD_AS_NEEDED/USE_LD_AS_NEEDED/g ${S}/gcc/config.in

	gnuconfig_update

	cd ${S}; ./contrib/gcc_update --touch &> /dev/null

	disable_multilib_libjava || die "failed to disable multilib java"
}


# This function checks whether or not glibc has the support required to build
# Position Independant Executables with gcc.
glibc_have_pie() {
	if [ ! -f ${ROOT}/usr/$(get_libdir)/Scrt1.o ] ; then
		echo
		ewarn "Your glibc does not have support for pie, the file Scrt1.o is missing"
		ewarn "Please update your glibc to a proper version or disable hardened"
		echo
		return 1
	fi
}


# This function determines whether or not libc has been patched with stack
# smashing protection support.
libc_has_ssp() {
	local libc_prefix
	use ppc64 && libc_prefix="/lib64/"
	libc_prefix="${libc_prefix:="/$(get_libdir)/"}"

	use uclibc \
		&& local libc_file="libc.so.0" \
		|| local libc_file="libc.so.6"

	local my_libc=${ROOT}/${libc_prefix}/${libc_file}

	# Check for the libc to have the __guard symbols
	if  [ "$(readelf -s "${my_libc}" 2>/dev/null | \
	         grep GLOBAL | grep OBJECT | grep '__guard')" ] && \
	    [ "$(readelf -s "${my_libc}" 2>/dev/null | \
	         grep GLOBAL | grep FUNC | grep '__stack_smash_handler')" ]
	then
		return 0
	else
		return 1
	fi
}


gcc-library-configure() {
	# multilib support
	if [ "${GCC_TARGET_NO_MULTILIB}" == "true" ]
	then
		confgcc="${confgcc} --disable-multilib"
	else
		confgcc="${confgcc} --enable-multilib"
	fi
}


gcc-compiler-configure() {
	# multilib support
	if use !nomultilib && (use amd64 || use mips)
	then
		confgcc="${confgcc} --enable-multilib"
	else
		confgcc="${confgcc} --disable-multilib"
	fi

	# GTK+ is preferred over xlib in 3.4.x (xlib is unmaintained
	# right now). Much thanks to <csm@gnu.org> for the heads up.
	# Travis Tilley <lv@gentoo.org>  (11 Jul 2004)
	if ! use build && use gcj && use gtk
	then
		myconf="${myconf} --enable-java-awt=gtk"
	fi

	use build || use !gcj && confgcc="${confgcc} --disable-libgcj"

	# Add --with-abi flags to enable respective MIPS ABIs
	case "${CCHOST}" in
	    mips*)
		use !nomultilib && myconf="${myconf} --with-abi=32"
		use n64 && myconf="${myconf} --with-abi=n64"
		use n32 && myconf="${myconf} --with-abi=n32"
	    ;;
	esac

	if use !build ; then
		GCC_LANG="c,c++"
		use f77 && GCC_LANG="${GCC_LANG},f77"
		use objc && GCC_LANG="${GCC_LANG},objc"
		use gcj && GCC_LANG="${GCC_LANG},java"
		# We do NOT want 'ADA support' in here!
		# use ada  && gcc_lang="${gcc_lang},ada"
	else
		GCC_LANG="c"
	fi

	einfo "configuring for GCC_LANG: ${GCC_LANG}"
}


# Other than the variables described for gcc_setup_variables, the following
# will alter tha behavior of gcc_do_configure:
#
#	CCHOST
#	CBUILD
#			Enable building for a target that differs from CHOST
#
#	GCC_TARGET_NO_MULTILIB
#			Disable multilib. Useful when building single library targets.
#
#	GCC_LANG
#			Enable support for ${GCC_LANG} languages. defaults to just "c"
#
# Travis Tilley <lv@gentoo.org> (04 Sep 2004)
#
gcc_do_configure() {
	local confgcc

	# If we've forgotten to set the path variables, this will give us
	# reasonable defaults.
	gcc_setup_variables

	if [ "${GCC_VAR_TYPE}" == "versioned" ] ; then
		confgcc="--enable-version-specific-runtime-libs"
	elif [ "${GCC_VAR_TYPE}" == "non-versioned" ] ; then
		confgcc="--libdir=/${LIBPATH}"
	else
		die "bad GCC_VAR_TYPE"
	fi

	# Set configuration based on path variables
	confgcc="${confgcc} \
		--prefix=${PREFIX} \
		--bindir=${BINPATH} \
		--includedir=${INCLUDEPATH} \
		--datadir=${DATAPATH} \
		--mandir=${DATAPATH}/man \
		--infodir=${DATAPATH}/info \
		--with-gxx-include-dir=${STDCXX_INCDIR}"

	# Incredibly theoretical cross-compiler support
	confgcc="${confgcc} --host=${CHOST}"
	if [ "${CCHOST}" != "${CHOST}" -a "${CCHOST}" != "" ] ; then
		# Straight from the GCC install doc:
		# "GCC has code to correctly determine the correct value for target 
		# for nearly all native systems. Therefore, we highly recommend you
		# not provide a configure target when configuring a native compiler."
		confgcc="${confgcc} --target=${CCHOST}"
	fi
	if [ "${CBUILD}" != "" ] ; then
		confgcc="${confgcc} --build=${CBUILD}"
	fi

	# altivec support
	if use ppc || use ppc64 ; then
		use altivec && confgcc="${confgcc} --enable-altivec"
		use !altivec && confgcc="${confgcc} --disable-altivec"
	fi

	# Fix linking problem with c++ apps which where linked
	# against a 3.2.2 libgcc
	[ "${ARCH}" = "hppa" ] && myconf="${myconf} --enable-sjlj-exceptions"

	# Native Language Support
	if use nls && use !build ; then
		confgcc="${confgcc} --enable-nls --without-included-gettext"
	else
		confgcc="${confgcc} --disable-nls"
	fi

	# __cxa_atexit is "essential for fully standards-compliant handling of
	# destructors", but apparently requires glibc.
	# --enable-sjlj-exceptions : currently the unwind stuff seems to work 
	# for statically linked apps but not dynamic
	# so use setjmp/longjmp exceptions by default
	# uclibc uses --enable-clocale=uclibc (autodetected)
	# --disable-libunwind-exceptions needed till unwind sections get fixed. see ps.m for details
	if use !uclibc ; then
		confgcc="${confgcc} --enable-__cxa_atexit --enable-clocale=gnu"
	else
		confgcc="${confgcc} --disable-__cxa_atexit --enable-target-optspace \
			--enable-sjlj-exceptions"
	fi

	# reasonably sane globals (hopefully)
	confgcc="${confgcc} \
		--enable-shared \
		--with-system-zlib \
		--disable-checking \
		--disable-werror \
		--disable-libunwind-exceptions \
		--with-gnu-ld \
		--enable-threads=posix"

	# default arch support
	use sparc && confgcc="${confgcc} --with-cpu=v7"
	use ppc && confgcc="${confgcc} --with-cpu=common"

	# etype specific configuration
	einfo "running ${ETYPE}-configure"
	${ETYPE}-configure || die

	# if not specified, assume we are building for a target that only
	# requires C support
	GCC_LANG="${GCC_LANG:=c}"
	confgcc="${confgcc} --enable-languages=${GCC_LANG}"

	# Nothing wrong with a good dose of verbosity
	echo
	einfo "PREFIX:          ${PREFIX}"
	einfo "BINPATH:         ${BINPATH}"
	einfo "LIBPATH:         ${LIBPATH}"
	einfo "DATAPATH:        ${DATAPATH}"
	einfo "STDCXX_INCDIR:   ${STDCXX_INCDIR}"
	echo
	einfo "Configuring GCC with: ${confgcc} ${@} ${GCC_EXTRA_CONF}"
	echo

	# Build in a separate build tree
	mkdir -p ${WORKDIR}/build
	pushd ${WORKDIR}/build > /dev/null

	# and now to do the actual configuration
	addwrite "/dev/zero"
	${S}/configure ${confgcc} ${@} ${GCC_EXTRA_CONF} || \
		die "failed to run configure"

	# return to whatever directory we were in before
	popd > /dev/null
}


# This function accepts one optional argument, the make target to be used.
# If ommitted, gcc_do_make will try to guess whether it should use all,
# profiledbootstrap, or bootstrap-lean depending on CCHOST and arch. An
# example of how to use this function:
#
#	gcc_do_make all-target-libstdc++-v3
#
# In addition to the target to be used, the following variables alter the
# behavior of this function:
#
#	LDFLAGS
#			Flags to pass to ld
#
#	STAGE1_CFLAGS
#			CFLAGS to use during stage1 of a gcc bootstrap
#
#	BOOT_CFLAGS
#			CFLAGS to use during stages 2+3 of a gcc bootstrap.
#
# Travis Tilley <lv@gentoo.org> (04 Sep 2004)
#
gcc_do_make() {
	# Setup -j in MAKEOPTS
	get_number_of_jobs

	# Only build it static if we are just building the C frontend, else
	# a lot of things break because there are not libstdc++.so ....
	if use static && [ "${GCC_LANG}" = "c" ] ; then
		LDFLAGS="${LDFLAGS:="-static"}"
	fi
	
	STAGE1_CFLAGS="${STAGE1_CFLAGS:="-O"}"

	if [ -z "${CCHOST}" -o "${CCHOST}" == "${CHOST}" ] ; then
		# we only want to use the system's CFLAGS if not building a
		# cross-compiler.
		BOOT_CFLAGS="${BOOT_CFLAGS:="${CFLAGS}"}"
	else
		BOOT_CFLAGS="${BOOT_CFLAGS:="-O2"}"
	fi

	# Fix for libtool-portage.patch
	local OLDS="${S}"
	S="${WORKDIR}/build"

	# Set make target to $1 if passed
	[ "$1" != "" ] && GCC_MAKE_TARGET="$1"
	# default target
	if [ "${CCHOST}" != "${CHOST}" ] ; then
		# 3 stage bootstrapping doesnt quite work when you cant run the
		# resulting binaries natively ^^;
		GCC_MAKE_TARGET="${GCC_MAKE_TARGET:=all}"
	elif use x86 || use amd64 || use ppc64 ; then
		GCC_MAKE_TARGET="${GCC_MAKE_TARGET:=profiledbootstrap}"
	else
		GCC_MAKE_TARGET="${GCC_MAKE_TARGET:=bootstrap-lean}"
	fi

	# the gcc docs state that parallel make isnt supported for the
	# profiledbootstrap target, as collisions in profile collecting may occur.
	if [ "${GCC_MAKE_TARGET}" == "profiledbootstrap" ] ; then
		MAKE_COMMAND="make"
	else
		MAKE_COMMAND="emake"
	fi

	pushd ${WORKDIR}/build
	einfo "Running ${MAKE_COMMAND} LDFLAGS=\"${LDFLAGS}\" STAGE1_CFLAGS=\"${STAGE1_CFLAGS}\" LIBPATH=\"${LIBPATH}\" BOOT_CFLAGS=\"${BOOT_CFLAGS}\" ${GCC_MAKE_TARGET}"

	${MAKE_COMMAND} LDFLAGS="${LDFLAGS}" STAGE1_CFLAGS="${STAGE1_CFLAGS}" \
		LIBPATH="${LIBPATH}" BOOT_CFLAGS="${BOOT_CFLAGS} ${GCC_MAKE_TARGET}" \
		|| die
	popd
}


create_gcc_multilib_scripts() {
	mkdir -p ${D}/${BINPATH}/
	mkdir -p ${D}/usr/bin/

	if has_m32 ; then

		echo -e '#!/bin/sh \nexec '"/${BINPATH}/${CHOST}-gcc -m32 "'"$@"' \
			> ${D}/${BINPATH}/${CHOST}-gcc32-${PV}
		chmod +x ${D}/${BINPATH}/${CHOST}-gcc32-${PV}
		ln -s ../../${BINPATH}/${CHOST}-gcc32-${PV} ${D}/usr/bin/gcc32

		echo -e '#!/bin/sh \nexec '"/${BINPATH}/${CHOST}-g++ -m32 "'"$@"' \
			> ${D}/${BINPATH}/${CHOST}-g++32-${PV}
		chmod +x ${D}/${BINPATH}/${CHOST}-g++32-${PV}
		ln -s ../../${BINPATH}/${CHOST}-g++32-${PV} ${D}/usr/bin/g++32

	fi
	if has_m64 ; then

		echo -e '#!/bin/sh \nexec '"/${BINPATH}/${CHOST}-gcc -m64 "'"$@"' \
			> ${D}/${BINPATH}/${CHOST}-gcc64-${PV}
		chmod +x ${D}/${BINPATH}/${CHOST}-gcc64-${PV}
		ln -s ../../${BINPATH}/${CHOST}-gcc64-${PV} ${D}/usr/bin/gcc64

		echo -e '#!/bin/sh \nexec '"/${BINPATH}/${CHOST}-g++ -m64 "'"$@"' \
			> ${D}/${BINPATH}/${CHOST}-g++64-${PV}
		chmod +x ${D}/${BINPATH}/${CHOST}-g++64-${PV}
		ln -s ../../${BINPATH}/${CHOST}-g++64-${PV} ${D}/usr/bin/g++64

	fi
}


# This function will add ${PV} to the names of all shared libraries in the
# directory specified to avoid filename collisions between multiple slotted 
# non-versioned gcc targets. If no directory is specified, it is assumed that
# you want -all- shared objects to have ${PV} added. Example
#
#	add_version_to_shared ${D}/usr/$(get_libdir)
#
# Travis Tilley <lv@gentoo.org> (05 Sep 2004)
#
add_version_to_shared() {
	local sharedlib
	if [ "$1" == "" ] ; then
		local sharedlibdir="${D}"
	else
		local sharedlibdir="$1"
	fi

	for sharedlib in `find ${sharedlibdir} -name *.so.*` ; do
		if [ ! -L "${sharedlib}" ] ; then
			einfo "Renaming `basename "${sharedlib}"` to `basename "${sharedlib/.so*/}-${PV}.so.${sharedlib/*.so./}"`"
			mv "${sharedlib}" "${sharedlib/.so*/}-${PV}.so.${sharedlib/*.so./}" \
				|| die
			pushd `dirname "${sharedlib}"` > /dev/null || die
			ln -sf "`basename "${sharedlib/.so*/}-${PV}.so.${sharedlib/*.so./}"`" \
				"`basename "${sharedlib}"`" || die
			popd > /dev/null || die
		fi
	done
}


# This is mostly a stub function to be overwritten in an ebuild
gcc_do_filter_flags() {
	strip-flags

	# In general gcc does not like optimization, and add -O2 where
	# it is safe.  This is especially true for gcc 3.3 + 3.4
	replace-flags -O? -O2

	# ...sure, why not?
	strip-unsupported-flags
}


gcc_src_compile() {
	gcc_do_filter_flags
	einfo "CFLAGS=\"${CFLAGS}\""
	einfo "CXXFLAGS=\"${CXXFLAGS}\""

	# Build in a separate build tree
	mkdir -p ${WORKDIR}/build
	pushd ${WORKDIR}/build > /dev/null

	# Install our pre generated manpages if we do not have perl ...
	if [ ! -x /usr/bin/perl -a "${GCC_MANPAGE_VERSION}" != "none" ] ; then
		unpack gcc-${GCC_MANPAGE_VERSION}-manpages.tar.bz2 || \
			die "Failed to unpack man pages"
	fi

	einfo "Configuring ${PN}..."
	gcc_do_configure

	touch ${S}/gcc/c-gperf.h

	# Do not make manpages if we do not have perl ...
	if [ ! -x /usr/bin/perl ] ; then
		find ${WORKDIR}/build -name '*.[17]' -exec touch {} \; || :
	fi

	einfo "Compiling ${PN}..."
	gcc_do_make ${GCC_MAKE_TARGET}

	if [ "${ETYPE}" == "gcc-compiler" -a "${SPLIT_SPECS}" == "true" ] ; then
		split_out_specs_files || die "failed to split out specs"
	fi

	popd > /dev/null
}


gcc-library-src_install() {
	einfo "Installing ${PN}..."
	# Do the 'make install' from the build directory
	cd ${WORKDIR}/build
	S="${WORKDIR}/build" \
	make DESTDIR="${D}" \
		prefix=${PREFIX} \
		bindir=${BINPATH} \
		includedir=${LIBPATH}/include \
		datadir=${DATAPATH} \
		mandir=${DATAPATH}/man \
		infodir=${DATAPATH}/info \
		LIBPATH="${LIBPATH}" \
		${GCC_INSTALL_TARGET} || die

	if [ "${GCC_LIB_COMPAT_ONLY}" == "true" ] ; then
		rm -rf ${D}/${INCLUDEPATH}
		rm -rf ${D}/${DATAPATH}
		pushd ${D}/${LIBPATH}/
		rm *.a *.la *.so
		popd
	fi

	if [ -n "${GCC_LIB_USE_SUBDIR}" ] ; then
		mkdir -p ${WORKDIR}/${GCC_LIB_USE_SUBDIR}/
		mv ${D}/${LIBPATH}/* ${WORKDIR}/${GCC_LIB_USE_SUBDIR}/
		mv ${WORKDIR}/${GCC_LIB_USE_SUBDIR}/ ${D}/${LIBPATH}
		
		mkdir -p ${D}/etc/env.d/
		echo "LDPATH=\"${LIBPATH}/${GCC_LIB_USE_SUBDIR}/\"" >> ${D}/etc/env.d/99${PN}
	fi

	if [ "${GCC_VAR_TYPE}" == "non-versioned" ] ; then
		# if we're not using versioned directories, we need to use versioned
		# filenames.
		add_version_to_shared
	fi
}

toolchain_src_install() {
	${ETYPE}-src_install
}

toolchain_src_compile() {
	gcc_src_compile
}

toolchain_src_unpack() {
	gcc_src_unpack
}

toolchain_pkg_setup() {
	gcc_pkg_setup
}