diff options
Diffstat (limited to 'mail-mta/postfix/postfix-2.6.2-r1.ebuild')
| -rw-r--r-- | mail-mta/postfix/postfix-2.6.2-r1.ebuild | 355 |
1 files changed, 355 insertions, 0 deletions
diff --git a/mail-mta/postfix/postfix-2.6.2-r1.ebuild b/mail-mta/postfix/postfix-2.6.2-r1.ebuild new file mode 100644 index 000000000000..8830594183f2 --- /dev/null +++ b/mail-mta/postfix/postfix-2.6.2-r1.ebuild @@ -0,0 +1,355 @@ +# Copyright 1999-2009 Gentoo Foundation +# Distributed under the terms of the GNU General Public License v2 +# $Header: /var/cvsroot/gentoo-x86/mail-mta/postfix/postfix-2.6.2-r1.ebuild,v 1.1 2009/07/10 18:56:28 dertobi123 Exp $ + +# NOTE: this ebuild is a regular ebuild without mailer-config support! +# Comment lines below "regular ebuild" and uncomment lines below "mailer-config support" +# to turn this ebuild to a mailer-config enabled ebuild. + +# regular ebuild +inherit eutils multilib ssl-cert toolchain-funcs flag-o-matic pam +# mailer-config support +#inherit eutils multilib ssl-cert toolchain-funcs flag-o-matic mailer pam + +KEYWORDS="~alpha ~amd64 ~arm ~hppa ~ia64 ~ppc ~ppc64 ~s390 ~sh ~sparc ~x86 ~x86-fbsd" + +# regular ebuild +IUSE="cdb dovecot-sasl hardened ipv6 ldap mbox mysql nis pam postgres sasl selinux ssl vda" +# mailer-config support +#IUSE="cdb dovecot-sasl hardened ipv6 ldap mbox mysql nis pam postgres sasl selinux ssl vda" + +MY_PV="${PV/_rc/-RC}" +MY_SRC="${PN}-${MY_PV}" +MY_URI="ftp://ftp.porcupine.org/mirrors/postfix-release/official" +VDA_PV="2.6.2" +VDA_P="${PN}-${VDA_PV}-vda-ng" +RC_VER="2.5" + +DESCRIPTION="A fast and secure drop-in replacement for sendmail." +HOMEPAGE="http://www.postfix.org/" +SRC_URI="${MY_URI}/${MY_SRC}.tar.gz + vda? ( http://vda.sourceforge.net/VDA/${VDA_P}.patch.gz ) " + +LICENSE="IPL-1" +SLOT="0" + +# regular ebuild +PROVIDE="virtual/mta virtual/mda" +# mailer-config support +#PROVIDE="${PROVIDE} virtual/mda" + +DEPEND=">=sys-libs/db-3.2 + >=dev-libs/libpcre-3.4 + cdb? ( || ( >=dev-db/cdb-0.75-r1 >=dev-db/tinycdb-0.76 ) ) + ldap? ( >=net-nds/openldap-1.2 ) + mysql? ( virtual/mysql ) + pam? ( virtual/pam ) + postgres? ( virtual/postgresql-base ) + sasl? ( >=dev-libs/cyrus-sasl-2 ) + ssl? ( >=dev-libs/openssl-0.9.6g )" + +# regular ebuild +RDEPEND="${DEPEND} + >=net-mail/mailbase-0.00 + !virtual/mta + !net-mail/mailwrapper + selinux? ( sec-policy/selinux-postfix )" + +# mailer-config support +#RDEPEND="${DEPEND} +# >=net-mail/mailbase-0.00 +# selinux? ( sec-policy/selinux-postfix )" + +S="${WORKDIR}/${MY_SRC}" + +group_user_check() { + einfo "Checking for postfix group ..." + enewgroup postfix 207 + einfo "Checking for postdrop group ..." + enewgroup postdrop 208 + einfo "Checking for postfix user ..." + enewuser postfix 207 -1 /var/spool/postfix postfix,mail +} + +pkg_setup() { + # Do not upgrade live from Postfix <2.5 + if [[ -f /var/lib/init.d/started/postfix ]] ; then + if has_version '<mail-mta/postfix-2.5.0' ; then + if [[ "${FORCE_UPGRADE}" ]] ; then + echo + ewarn "You are upgrading from an incompatible version and you have" + ewarn "FORCE_UPGRADE set, will build this package while Postfix is running." + ewarn "You MUST stop Postfix BEFORE installing this version to your system." + echo + else + echo + eerror "You are upgrading from an incompatible version." + eerror "You MUST stop Postfix BEFORE installing this version to your system." + eerror "If you want minimal downtime, emerge postfix with:" + eerror " FORCE_UPGRADE=1 emerge --buildpkgonly postfix" + eerror " /etc/init.d/postfix stop" + eerror " emerge --usepkgonly postfix" + eerror "Then run etc-update or dispatch-conf and merge the configuration files." + eerror "Then restart Postfix with: /etc/init.d/postfix start" + die "Upgrade from an incompatible version!" + echo + fi + else + echo + ewarn "It's safe to upgrade your current version while it's running." + ewarn "If you don't want to take any chance, please hit Ctrl+C now," + ewarn "stop Postfix, then emerge again." + ewarn "You have been warned!" + ewarn "Waiting 5 seconds before continuing ..." + echo + epause 5 + fi + fi + + echo + ewarn "Read \"ftp://ftp.porcupine.org/mirrors/postfix-release/official/${MY_SRC}.RELEASE_NOTES\"" + ewarn "for incompatible changes before continueing." + ewarn "Bugs should be filed at \"http://bugs.gentoo.org/\" and" + ewarn "assigned to \"net-mail@gentoo.org\"." + echo + + # Warnings to work around bug #45764 + if has_version '<=mail-mta/postfix-2.0.18' ; then + echo + ewarn "You are upgrading from postfix-2.0.18 or earlier, some of the empty queue" + ewarn "directories get deleted while unmerging the older version (see bug #45764)." + ewarn "Please run '/etc/postfix/post-install upgrade-source' to recreate them." + echo + fi + + # TLS non-prod warning + if use ssl ; then + echo + ewarn "You have \"ssl\" in your USE flags, TLS will be enabled." + ewarn "This service is incompatible with the previous TLS patch." + ewarn "Visit http://www.postfix.org/TLS_README.html for more info." + echo + fi + + # IPV6 non-prod warn + if use ipv6 ; then + echo + ewarn "You have \"ipv6\" in your USE flags, IPV6 will be enabled." + ewarn "Visit http://www.postfix.org/IPV6_README.html for more info." + echo + fi + + # SASL non-prod warning + if use sasl ; then + echo + elog "Postfix 2.3 and newer supports two SASL implementations." + elog "Cyrus SASL and Dovecot protocol version 1 (server only)" + elog "Visit http://www.postfix.org/SASL_README.html for more info." + echo + fi + + # Add postfix, postdrop user/group (bug #77565) + group_user_check || die "Failed to check/add needed user/group" +} + +src_unpack() { + unpack ${A} + + cd "${S}" + if use vda ; then + epatch "${WORKDIR}/${VDA_P}.patch" + fi + + sed -i -e "/^#define ALIAS_DB_MAP/s|:/etc/aliases|:/etc/mail/aliases|" \ + src/util/sys_defs.h || die "sed failed" + + # change default paths to better comply with portage standard paths + sed -i -e "s:/usr/local/:/usr/:g" conf/master.cf || die "sed failed" +} + +src_compile() { + # 1) Added -Wl,-z,now wrt bug #62674 + # 2) Remove -ldl as it is not necessary, solves bug #106446 + # 3) -Wl,-z,now replaced by $(bindnow-flags) + # 4) Then bindnow-flags has been simply dropped according to + # http://www.mail-archive.com/gentoo-dev@lists.gentoo.org/msg23679.html + # 5) Make sure LDFLAGS get passed down to the executables. + local mycc="-DHAS_PCRE" mylibs="${LDFLAGS} -lpcre -lcrypt -lpthread" + + use pam && mylibs="${mylibs} -lpam" + + if use ldap ; then + mycc="${mycc} -DHAS_LDAP" + mylibs="${mylibs} -lldap -llber" + fi + + if use mysql ; then + mycc="${mycc} -DHAS_MYSQL $(mysql_config --include)" + mylibs="${mylibs} -lmysqlclient -lm -lz" + fi + + if use postgres ; then + mycc="${mycc} -DHAS_PGSQL -I$(pg_config --includedir)" + mylibs="${mylibs} -lpq -L$(pg_config --libdir)" + fi + + if use ssl ; then + mycc="${mycc} -DUSE_TLS" + mylibs="${mylibs} -lssl -lcrypto" + fi + + if use sasl ; then + if use dovecot-sasl ; then + # Set dovecot as default. + mycc="${mycc} -DDEF_SASL_SERVER=\\\"dovecot\\\"" + fi + mycc="${mycc} -DUSE_SASL_AUTH -DUSE_CYRUS_SASL -I/usr/include/sasl" + mylibs="${mylibs} -lsasl2" + elif use dovecot-sasl ; then + mycc="${mycc} -DUSE_SASL_AUTH -DDEF_SERVER_SASL_TYPE=\\\"dovecot\\\"" + fi + + if ! use nis ; then + sed -i -e "s|#define HAS_NIS|//#define HAS_NIS|g" \ + src/util/sys_defs.h || die "sed failed" + fi + + if use cdb ; then + mycc="${mycc} -DHAS_CDB" + CDB_LIBS="" + + # Tinycdb is preferred. + if has_version dev-db/tinycdb ; then + einfo "Building with dev-db/tinycdb" + CDB_LIBS="-lcdb" + else + einfo "Building with dev-db/cdb" + CDB_PATH="/usr/$(get_libdir)" + for i in cdb.a alloc.a buffer.a unix.a byte.a ; do + CDB_LIBS="${CDB_LIBS} ${CDB_PATH}/${i}" + done + fi + + mylibs="${mylibs} ${CDB_LIBS}" + fi + + mycc="${mycc} -DDEF_DAEMON_DIR=\\\"/usr/$(get_libdir)/postfix\\\"" + mycc="${mycc} -DDEF_MANPAGE_DIR=\\\"/usr/share/man\\\"" + mycc="${mycc} -DDEF_README_DIR=\\\"/usr/share/doc/${PF}/readme\\\"" + mycc="${mycc} -DDEF_HTML_DIR=\\\"/usr/share/doc/${PF}/html\\\"" + + # Robin H. Johnson <robbat2@gentoo.org> 17/Nov/2006 + # Fix because infra boxes hit 2Gb .db files that fail a 32-bit fstat signed check. + mycc="${mycc} -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE" + filter-lfs-flags + + local my_cc=$(tc-getCC) + einfo "CC=${my_cc:=gcc}" + + # Workaround for bug #76512 + [[ "$(gcc-version)" == "3.4" ]] && use hardened && replace-flags -O? -Os + + make DEBUG="" CC="${my_cc:=gcc}" OPT="${CFLAGS}" CCARGS="${mycc}" AUXLIBS="${mylibs}" \ + makefiles || die "configure problem" + + emake || die "compile problem" +} + +src_install () { + /bin/sh postfix-install \ + -non-interactive \ + install_root="${D}" \ + config_directory="/usr/share/doc/${PF}/defaults" \ + readme_directory="/usr/share/doc/${PF}/readme" \ + || die "postfix-install failed" + + # Fix spool removal on upgrade + rm -Rf "${D}/var" + keepdir /var/spool/postfix + + # Install rmail for UUCP, closes bug #19127 + dobin auxiliary/rmail/rmail + + # Provide another link for legacy FSH + dosym /usr/sbin/sendmail /usr/$(get_libdir)/sendmail + + # Install qshape tool + dobin auxiliary/qshape/qshape.pl + doman man/man1/qshape.1 + + # Performance tuning tools and their manuals + dosbin bin/smtp-{source,sink} bin/qmqp-{source,sink} + doman man/man1/smtp-{source,sink}.1 man/man1/qmqp-{source,sink}.1 + + # Set proper permissions on required files/directories + dodir /var/lib/postfix + keepdir /var/lib/postfix + fowners postfix:postfix /var/lib/postfix + fowners postfix:postfix /var/lib/postfix/.keep_${CATEGORY}_${PN}-${SLOT} + fperms 0750 /var/lib/postfix + fowners root:postdrop /usr/sbin/post{drop,queue} + fperms 02711 /usr/sbin/post{drop,queue} + + keepdir /etc/postfix + mv "${D}"/usr/share/doc/${PF}/defaults/*.cf "${D}"/etc/postfix + if use mbox ; then + mypostconf="mail_spool_directory=/var/spool/mail" + else + mypostconf="home_mailbox=.maildir/" + fi + "${D}/usr/sbin/postconf" -c "${D}/etc/postfix" \ + -e ${mypostconf} || die "postconf failed" + + insinto /etc/postfix + newins "${FILESDIR}/smtp.pass" saslpass + fperms 600 /etc/postfix/saslpass + + newinitd "${FILESDIR}/postfix.rc6.${RC_VER}" postfix || die "newinitd failed" + + mv "${S}/examples" "${D}/usr/share/doc/${PF}/" + dodoc *README COMPATIBILITY HISTORY INSTALL PORTING RELEASE_NOTES* + dohtml html/* + + pamd_mimic_system smtp auth account + + if use sasl ; then + insinto /etc/sasl2 + newins "${FILESDIR}/smtp.sasl" smtpd.conf + fi +} + +pkg_postinst() { + # Add postfix, postdrop user/group (bug #77565) + group_user_check || die "Failed to check/add needed user/group" + + # Do not install server.{key,pem) SSL certificates if they already exist + if use ssl && [[ ! -f "${ROOT}"/etc/ssl/postfix/server.key \ + && ! -f "${ROOT}"/etc/ssl/postfix/server.pem ]] ; then + SSL_ORGANIZATION="${SSL_ORGANIZATION:-Postfix SMTP Server}" + install_cert /etc/ssl/postfix/server + chown postfix:mail "${ROOT}"/etc/ssl/postfix/server.{key,pem} + fi + + ebegin "Fixing queue directories and permissions" + "${ROOT}/usr/$(get_libdir)/postfix/post-install" upgrade-permissions \ + daemon_directory=${ROOT}/usr/$(get_libdir)/postfix + echo + ewarn "If you upgraded from Postfix-1.x, you must revisit" + ewarn "your configuration files. See" + ewarn " /usr/share/doc/${PF}/RELEASE_NOTES" + ewarn "for a list of changes." + + if [[ ! -e /etc/mail/aliases.db ]] ; then + echo + ewarn "You must edit /etc/mail/aliases to suit your needs" + ewarn "and then run /usr/bin/newaliases. Postfix will not" + ewarn "work correctly without it." + fi + + if [[ -e /etc/mailer.conf ]] ; then + einfo + einfo "mailwrapper support is discontinued." + einfo "You may want to 'emerge -C mailwrapper' now." + einfo + fi +} |