Major changes for bug #177100 and others. Thanks to ikelos

(Portage version: 2.1.3.5)

5 files changed, 401 insertions, 0 deletions

diff --git a/sys-fs/cryptsetup/files/1.0.5-dm-crypt-start.sh b/sys-fs/cryptsetup/files/1.0.5-dm-crypt-start.sh
new file mode 100644
index 000000000000..f47a52301be3
--- /dev/null
+++ b/sys-fs/cryptsetup/files/1.0.5-dm-crypt-start.sh
@@ -0,0 +1,243 @@
+# /lib/rcscripts/addons/dm-crypt-start.sh
+
+# For backwards compatability with baselayout < 1.13.0
+dm_crypt_execute_checkfs() {
+	dm_crypt_execute_dmcrypt
+}
+
+dm_crypt_execute_volumes() {
+	dm_crypt_execute_dmcrypt
+}
+
+# Setup mappings for an individual target/swap
+# Note: This relies on variables localized in the main body below.
+dm_crypt_execute_dmcrypt() {
+	local dev ret mode
+	# some colors
+	local red='\x1b[31;01m' green='\x1b[32;01m' off='\x1b[0;0m'
+
+	if [ -n "$target" ]; then
+		# let user set options, otherwise leave empty
+		: ${options:=' '}
+	elif [ -n "$swap" ]; then
+		target=${swap}
+		# swap contents do not need to be preserved between boots, luks not required.
+		# suspend2 users should have initramfs's init handling their swap partition either way.
+		: ${options:='-c aes -h sha1 -d /dev/urandom'}
+		: ${pre_mount:='mkswap ${dev}'}
+	else
+		return
+	fi
+	if [ -z "$source" ] && [ ! -e "$source" ]; then
+		ewarn "source \"${source}\" for ${target} missing, skipping..."
+		return
+	fi
+
+	if [[ -n ${loop_file} ]] ; then
+		dev="/dev/mapper/${target}"
+		ebegin "  Setting up loop device ${source}"
+		/sbin/losetup ${source} ${loop_file}
+	fi
+
+	# cryptsetup:
+	# luksOpen <device> <name>      # <device> is $source
+	# create   <name>   <device>    # <name>   is $target
+	local arg1="create" arg2="$target" arg3="$source" luks=0
+
+	cryptsetup isLuks ${source} 2>/dev/null && { arg1="luksOpen"; arg2="$source"; arg3="$target"; luks=1; }
+
+	if /bin/cryptsetup status ${target} | egrep -q '\<active:' ; then
+		einfo "dm-crypt mapping ${target} is already configured"
+		return
+	fi
+	# Handle keys
+	if [ -n "$key" ]; then
+		# Notes: sed not used to avoid case where /usr partition is encrypted.
+		mode=${key/*:/} && ( [ "$mode" == "$key" ] || [ -z "$mode" ] ) && mode=reg
+		key=${key/:*/}
+		case "$mode" in
+		gpg|reg)
+			# handle key on removable device
+			if [ -n "$remdev" ]; then
+				# temp directory to mount removable device
+				local mntrem=/mnt/remdev
+				local c=0 ans
+				for (( i = 0 ; i < 10 ; i++ ))
+				do
+					[ ! -d "$mntrem" ] && mkdir -p ${mntrem} 2>/dev/null >/dev/null
+					if mount -n -o ro ${remdev} ${mntrem} 2>/dev/null >/dev/null ; then
+						sleep 2
+						# keyfile exists?
+						if [ ! -e "${mntrem}${key}" ]; then
+							umount -n ${mntrem} 2>/dev/null >/dev/null
+							rmdir ${mntrem} 2>/dev/null >/dev/null
+							einfo "Cannot find ${key} on removable media."
+							echo -n -e " ${green}*${off}  Abort?(${red}yes${off}/${green}no${off})" >/dev/console	
+							read ans </dev/console
+							echo	>/dev/console
+							[ "$ans" != "yes" ] && { i=0; c=0; } || return 
+						else
+							key="${mntrem}${key}"
+							break
+						fi
+					else
+						[ "$c" -eq 0 ] && einfo "Please insert removable device for ${target}"
+						c=1
+						sleep 2
+						# let user abort
+						if [ "$i" -eq 9 ]; then
+							rmdir ${mntrem} 2>/dev/null >/dev/null
+							einfo "Removable device for ${target} not present."
+							echo -n -e " ${green}*${off}  Abort?(${red}yes${off}/${green}no${off})" >/dev/console
+							read ans </dev/console
+							echo  >/dev/console
+							[ "$ans" != "yes" ] && { i=0; c=0; } || return
+						fi
+					fi
+				done
+			else    # keyfile ! on removable device
+				if [ ! -e "$key" ]; then
+					ewarn "${source} will not be decrypted ..."
+					einfo "Reason: keyfile ${key} does not exist."
+					return
+				fi
+			fi
+			;;
+		*)
+			ewarn "${source} will not be decrypted ..."
+			einfo "Reason: mode ${mode} is invalid."
+			return
+			;;
+		esac
+	else
+		mode=none
+	fi
+	splash svc_input_begin ${SVCNAME} >/dev/null 2>&1
+	ebegin "dm-crypt map ${target}"
+	einfo "cryptsetup will be called with : ${options} ${arg1} ${arg2} ${arg3}"
+	if [ "$mode" == "gpg" ]; then
+		: ${gpg_options:='-q -d'}
+		# gpg available ?
+		if type -p gpg >/dev/null ; then
+			for (( i = 0 ; i < 3 ; i++ ))
+			do
+				# paranoid, don't store key in a variable, pipe it so it stays very little in ram unprotected.
+				# save stdin stdout stderr "values"
+				exec 3>&0 4>&1 6>&2 # ABS says fd 5 is reserved
+				exec &>/dev/console </dev/console
+				gpg ${gpg_options} ${key} 2>/dev/null | cryptsetup ${options} ${arg1} ${arg2} ${arg3}
+				ret="$?"
+				# restore values and close file descriptors
+				exec 0>&3 1>&4 2>&6
+				exec 3>&- 4>&- 6>&-
+				[ "$ret" -eq 0 ] && break
+			done
+			eend "${ret}" "failure running cryptsetup"
+		else
+			ewarn "${source} will not be decrypted ..."
+			einfo "Reason: cannot find gpg application."     
+			einfo "You have to install app-crypt/gnupg first."
+			einfo "If you have /usr on its own partition, try copying gpg to /bin ."
+		fi
+	else
+		if [ "$mode" == "reg" ]; then
+			cryptsetup ${options} -d ${key} ${arg1} ${arg2} ${arg3} >/dev/console </dev/console
+			ret="$?"
+			eend "${ret}" "failure running cryptsetup"
+		else
+			cryptsetup ${options} ${arg1} ${arg2} ${arg3} >/dev/console </dev/console
+			ret="$?"
+			eend "${ret}" "failure running cryptsetup"
+		fi
+	fi
+	if [ -d "$mntrem" ]; then
+		umount -n ${mntrem} 2>/dev/null >/dev/null
+		rmdir ${mntrem} 2>/dev/null >/dev/null
+	fi
+	splash svc_input_end ${SVCNAME} >/dev/null 2>&1
+
+	if [[ ${ret} != 0 ]] ; then
+		cryptfs_status=1
+	else
+		if [[ -n ${pre_mount} ]] ; then
+			dev="/dev/mapper/${target}"
+			ebegin "  Running pre_mount commands for ${target}"
+			eval "${pre_mount}" > /dev/null
+			ewend $? || cryptfs_status=1
+		fi
+	fi
+}
+
+# Run any post_mount commands for an individual mount
+#
+# Note: This relies on variables localized in the main body below.
+dm_crypt_execute_localmount() {
+	local mount_point
+
+	[ -z "$target" ] && [ -z "$post_mount" ] && return
+
+	if ! /bin/cryptsetup status ${target} | egrep -q '\<active:' ; then
+		ewarn "Skipping unmapped target ${target}"
+		cryptfs_status=1
+		return
+	fi
+
+	mount_point=$(grep "/dev/mapper/${target}" /proc/mounts | cut -d' ' -f2)
+	if [[ -z ${mount_point} ]] ; then
+		ewarn "Failed to find mount point for ${target}, skipping"
+		cryptfs_status=1
+	fi
+
+	if [[ -n ${post_mount} ]] ; then
+		ebegin "Running post_mount commands for target ${target}"
+		eval "${post_mount}" >/dev/null
+		eend $? || cryptfs_status=1
+	fi
+}
+
+local cryptfs_status=0
+local gpg_options key loop_file target targetline options pre_mount post_mount source swap remdev
+
+if [[ -f /etc/conf.d/dmcrypt ]] && [[ -x /bin/cryptsetup ]] ; then
+	ebegin "Setting up dm-crypt mappings"
+
+	# Fix for baselayout-1.12.10 (bug 174256)
+	[ -z ${SVCNAME} ] && SVCNAME="${myservice}"
+
+	while read targetline ; do
+		# skip comments and blank lines
+		[[ ${targetline}\# == \#* ]] && continue
+
+		# check for the start of a new target/swap
+		case ${targetline} in
+			target=*|swap=*)
+				# If we have a target queued up, then execute it
+				dm_crypt_execute_${SVCNAME}
+
+				# Prepare for the next target/swap by resetting variables
+				unset gpg_options key loop_file target options pre_mount post_mount source swap remdev
+				;;
+
+			gpg_options=*|remdev=*|key=*|loop_file=*|options=*|pre_mount=*|post_mount=*|source=*)
+				if [[ -z ${target} && -z ${swap} ]] ; then
+					ewarn "Ignoring setting outside target/swap section: ${targetline}"
+					continue
+				fi
+				;;
+
+			*)
+				ewarn "Skipping invalid line in /etc/conf.d/dmcrypt: ${targetline}"
+				;;
+		esac
+
+		# Queue this setting for the next call to dm_crypt_execute_${SVCNAME}
+		eval "${targetline}"
+	done < /etc/conf.d/dmcrypt
+
+	# If we have a target queued up, then execute it
+	dm_crypt_execute_${SVCNAME}
+
+	ewend ${cryptfs_status} "Failed to setup dm-crypt devices"
+fi
+
+# vim:ts=4
diff --git a/sys-fs/cryptsetup/files/1.0.5-dm-crypt-stop.sh b/sys-fs/cryptsetup/files/1.0.5-dm-crypt-stop.sh
new file mode 100644
index 000000000000..9aea8217cb8f
--- /dev/null
+++ b/sys-fs/cryptsetup/files/1.0.5-dm-crypt-stop.sh
@@ -0,0 +1,40 @@
+# /lib/rcscripts/addons/dm-crypt-stop.sh
+
+# Try to remove any dm-crypt mappings
+csetup=/bin/cryptsetup
+if [ -f /etc/conf.d/cryptfs ] && [ -x "$csetup" ]
+then
+	einfo "Removing dm-crypt mappings"
+
+	/bin/egrep "^(target|swap)" /etc/conf.d/cryptfs | \
+	while read targetline
+	do
+		target=
+		swap=
+
+		eval ${targetline}
+
+		[ -n "${swap}" ] && target=${swap}
+		[ -z "${target}" ] && ewarn "Invalid line in /etc/conf.d/cryptfs: ${targetline}"
+
+		ebegin "Removing dm-crypt mapping for: ${target}"
+		${csetup} remove ${target}
+		eend $? "Failed to remove dm-crypt mapping for: ${target}"
+	done
+
+	if [[ -n $(/bin/egrep -e "^(source=)./dev/loop*" /etc/conf.d/cryptfs) ]] ; then
+		einfo "Taking down any dm-crypt loop devices"
+		/bin/egrep -e "^(source)" /etc/conf.d/cryptfs | while read sourceline
+		do
+			source=
+			eval ${sourceline}
+			if [[ -n $(echo ${source} | grep /dev/loop) ]] ; then
+				ebegin "   Taking down ${source}"
+				/sbin/losetup -d ${source}
+				eend $? "  Failed to remove loop"
+			fi
+		done
+	fi
+fi
+
+# vim:ts=4
diff --git a/sys-fs/cryptsetup/files/1.0.5-dmcrypt.confd b/sys-fs/cryptsetup/files/1.0.5-dmcrypt.confd
new file mode 100644
index 000000000000..faa61383ceb6
--- /dev/null
+++ b/sys-fs/cryptsetup/files/1.0.5-dmcrypt.confd
@@ -0,0 +1,88 @@
+# /etc/conf.d/cryptfs
+
+#--------------------
+# Instructions
+#--------------------
+
+# Note regarding the syntax of this file.  This file is *almost* bash,
+# but each line is evaluated separately.  Separate swaps/targets can be
+# specified.  The init-script which reads this file assumes that a
+# swap= or target= line starts a new section, similar to lilo or grub
+# configuration.
+
+# Note when using gpg keys and /usr on a separate partition, you will
+# have to copy /usr/bin/gpg to /bin/gpg so that it will work properly
+# and ensure that gpg has been compiled statically.
+# See http://bugs.gentoo.org/90482 for more information.
+
+# Note that the init-script which reads this file detects whether your
+# partition is LUKS or not. No mkfs is run unless you specify a makefs
+# option.
+
+# Arguments:
+#-----------
+# target=<name>                      == Mapping name for partition.
+# swap=<name>                        == Mapping name for swap partition.
+# source='<dev>'                     == Real device for partition.
+# key='</path/to/keyfile>[:<mode>]'  == Fullpath from / or from inside removable media.
+# remdev='<dev>'                     == Device that will be assigned to removable media.
+# gpg_options='<opts>'               == Default are --quiet --decrypt
+# options='<opts>'                   == cryptsetup, for LUKS you can only use --readonly
+# loop_file='<file>'                 == Loopback file.
+# pre_mount='cmds'                   == commands to execute before mounting partition.
+# post_mount='cmds'                  == commands to execute after mounting partition.
+#-----------
+# Supported Modes
+# gpg					== decrypt and pipe key into cryptsetup.
+#						Note: new-line character must not be part of key.
+#						Command to erase \n char: 'cat key | tr -d '\n' > cleanKey'
+
+#--------------------
+# dm-crypt examples
+#--------------------
+
+## swap
+# Swap partitions. These should come first so that no keys make their
+# way into unencrypted swap.
+# If no options are given, they will default to: -c aes -h sha1 -d /dev/urandom
+# If no makefs is given then mkswap will be assumed
+#swap=crypt-swap
+#source='/dev/hda2'
+
+## /home with passphrase
+#target=crypt-home
+#source='/dev/hda5'
+
+## /home with regular keyfile
+#target=crypt-home
+#source='/dev/hda5'
+#key='/full/path/to/homekey'
+
+## /home with gpg protected key
+#target=crypt-home
+#source='/dev/hda5'
+#key='/full/path/to/homekey:gpg'
+
+## /home with regular keyfile on removable media(such as usb-stick)
+#target=crypt-home
+#source='/dev/hda5'
+#key='/full/path/to/homekey'
+#remdev='/dev/sda1'
+
+##/home with gpg protected key on removable media(such as usb-stick)
+#target=crypt-home
+#source='/dev/hda5'
+#key='/full/path/to/homekey:gpg'
+#remdev='/dev/sda1'
+
+##/tmp with regular keyfile
+#target=crypt-tmp
+#source='/dev/hda6'
+#key='/full/path/to/tmpkey'
+#pre_mount='/sbin/mkreiserfs -f -f ${dev}'
+#post_mount='chown root:root ${mount_point}; chmod 1777 ${mount_point}'
+
+## Loopback file example
+#mount='crypt-loop-home'
+#source='/dev/loop0'
+#loop_file='/mnt/crypt/home'
diff --git a/sys-fs/cryptsetup/files/1.0.5-dmcrypt.rc b/sys-fs/cryptsetup/files/1.0.5-dmcrypt.rc
new file mode 100644
index 000000000000..a861a4f80d2d
--- /dev/null
+++ b/sys-fs/cryptsetup/files/1.0.5-dmcrypt.rc
@@ -0,0 +1,27 @@
+#!/sbin/runscript
+# Copyright 1999-2007 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/sys-fs/cryptsetup/files/1.0.5-dmcrypt.rc,v 1.1 2007/08/14 16:05:16 strerror Exp $
+
+depend() {
+	before checkfs
+}
+
+start() {
+	if [ ! -e /lib/librc.so ]; then
+		eerror "The ${myservice} init script is written for baselayout-2"
+		eerror "Please do not use it with baselayout-1"
+		return 1
+	fi
+
+	. /lib/rcscripts/addons/dm-crypt-start.sh
+}
+
+stop() {
+	if [ ! -e /lib/librc.so ]; then
+		return 0
+	fi
+
+	. /lib/rcscripts/addons/dm-crypt-stop.sh
+}
+
diff --git a/sys-fs/cryptsetup/files/digest-cryptsetup-1.0.5 b/sys-fs/cryptsetup/files/digest-cryptsetup-1.0.5
new file mode 100644
index 000000000000..6f628fcf5e9f
--- /dev/null
+++ b/sys-fs/cryptsetup/files/digest-cryptsetup-1.0.5
@@ -0,0 +1,3 @@
+MD5 0aa2f94c39123f1a0352983e5366179c cryptsetup-1.0.5.tar.bz2 322394
+RMD160 99d9b0090b297b1bc2c72c064f091c8b2f322f70 cryptsetup-1.0.5.tar.bz2 322394
+SHA256 4bab529afa00cafde3bc5df2769578c88438f80c5152d4257cd0e86986f95bc4 cryptsetup-1.0.5.tar.bz2 322394