New ebuild for elilo, stolen from Mandrake and Debian

9 files changed, 1142 insertions, 1 deletions

diff --git a/sys-boot/elilo/ChangeLog b/sys-boot/elilo/ChangeLog
new file mode 100644
index 000000000000..b6b70fb2ff39
--- /dev/null
+++ b/sys-boot/elilo/ChangeLog
@@ -0,0 +1,11 @@
+# ChangeLog for sys-boot/elilo
+# Copyright 2000-2004 Gentoo Technologies, Inc.; Distributed under the GPL v2
+# $Header: /var/cvsroot/gentoo-x86/sys-boot/elilo/ChangeLog,v 1.1 2004/01/23 16:21:39 agriffis Exp $
+
+*elilo-3.4 (23 Jan 2004)
+
+  23 Jan 2004; <agriffis@gentoo.org> elilo-3.4.ebuild,
+  files/elilo-3.3a-devscheme.patch, files/elilo-3.4,
+  files/elilo-3.4-makefile.patch, files/elilo.8-3.4, files/eliloalt.8-3.4:
+  New ebuild for elilo, stolen from Mandrake and Debian
+
diff --git a/sys-boot/elilo/Manifest b/sys-boot/elilo/Manifest
index 265ee8f9cfc5..097d314787c1 100644
--- a/sys-boot/elilo/Manifest
+++ b/sys-boot/elilo/Manifest
@@ -1,4 +1,5 @@
-MD5 cda6670281bd5d3ba667d35e1edd3049 elilo-3.4.ebuild 1762
+MD5 170751d8049b2c371326f017bea65442 elilo-3.4.ebuild 1750
+MD5 783b45fdac0028728f23e9f1b8ffea8b ChangeLog 478
 MD5 2b2d58955c4ad612fee3bcf9b977bc41 files/elilo-3.4-makefile.patch 338
 MD5 85650d47a2950be23774d73205b19e97 files/digest-elilo-3.4 61
 MD5 c41337651da1c5b597609856146438ec files/elilo-3.4 22707
diff --git a/sys-boot/elilo/elilo-3.4.ebuild b/sys-boot/elilo/elilo-3.4.ebuild
new file mode 100644
index 000000000000..72a3cc12ede8
--- /dev/null
+++ b/sys-boot/elilo/elilo-3.4.ebuild
@@ -0,0 +1,59 @@
+# Copyright 1999-2004 Gentoo Technologies, Inc.
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/sys-boot/elilo/elilo-3.4.ebuild,v 1.1 2004/01/23 16:21:39 agriffis Exp $
+
+DESCRIPTION="Linux boot loader for EFI-based systems such as IA-64"
+HOMEPAGE="http://developer.intel.com/technology/efi"
+SRC_URI="ftp://ftp.hpl.hp.com/pub/linux-ia64/${P}.tar.gz"
+KEYWORDS="~ia64"
+SLOT="0"
+LICENSE="GPL-2"
+IUSE=""
+
+# gnu-efi contains only static libs, so there's no run-time dep on it
+DEPEND=">=gnu-efi-3.0"
+RDEPEND="sys-boot/efibootmgr"
+
+src_unpack() {
+	unpack ${A} && cd ${S} || die "failed to unpack"
+	epatch ${FILESDIR}/elilo-3.4-makefile.patch || die "epatch failed"
+	epatch ${FILESDIR}/elilo-3.3a-devscheme.patch || die "epatch failed"
+}
+
+src_compile() {
+	local iarch
+	case $ARCH in
+		ia64) iarch=ia64 ;;
+		x86)  iarch=ia32 ;;		# for cross-compiling?
+		*)    die "unknown architecture: $ARCH" ;;
+	esac
+
+	# "prefix" on the next line specifies where to find gcc, as, ld,
+	# etc.  It's not the usual meaning of "prefix".  By blanking it we
+	# allow PATH to be searched.
+	emake -j1 prefix= CC="${CC}" ARCH=${iarch} || die "emake failed"
+
+	# unversion the man-pages and Debian's elilo script
+	cp ${FILESDIR}/elilo.8-${PV} elilo.8
+	cp ${FILESDIR}/eliloalt.8-${PV} eliloalt.8
+	cp ${FILESDIR}/elilo-${PV} elilo
+}
+
+src_install() {
+	dodir /usr/lib/elilo || die
+	dodir /usr/sbin || die
+
+	# install the efi executable in a known location
+	install -m755 elilo.efi ${D}/usr/lib/elilo || die
+
+	# install eliloalt
+	install -m755 tools/eliloalt ${D}/usr/sbin || die
+	doman eliloalt.8 || die
+
+	# text docs
+	dodoc docs/*
+
+	# install the debian elilo script
+	install -m755 elilo ${D}/usr/sbin || die
+	doman elilo.8 || die
+}
diff --git a/sys-boot/elilo/files/digest-elilo-3.4 b/sys-boot/elilo/files/digest-elilo-3.4
new file mode 100644
index 000000000000..6c9603e2135d
--- /dev/null
+++ b/sys-boot/elilo/files/digest-elilo-3.4
@@ -0,0 +1 @@
+MD5 e7357929dfca29436d35ad6386fc051c elilo-3.4.tar.gz 316518
diff --git a/sys-boot/elilo/files/elilo-3.3a-devscheme.patch b/sys-boot/elilo/files/elilo-3.3a-devscheme.patch
new file mode 100644
index 000000000000..3d8f0c42f55d
--- /dev/null
+++ b/sys-boot/elilo/files/elilo-3.3a-devscheme.patch
@@ -0,0 +1,124 @@
+--- elilo-3.3a/devschemes/simple.c.devscheme	2002-09-16 20:51:52.000000000 +0200
++++ elilo-3.3a/devschemes/simple.c	2003-05-26 15:05:13.000000000 +0200
+@@ -38,52 +38,50 @@ typedef struct {
+ } devices_types_t;
+ 
+ 
+-static UINT32 atapi_count, scsi_count, net_count;
++static UINT32 cdrom_count, hd_count, net_count;
+ 
+ static INTN
+-atapi_device(device_t *dev, EFI_DEVICE_PATH *dp)
++network_device(device_t *dev, EFI_DEVICE_PATH *dp)
+ {
+-	//ATAPI_DEVICE_PATH *atapi = (ATAPI_DEVICE_PATH *)dp;
++	//MAC_ADDR_DEVICE_PATH *mac = (MAC_ADDR_DEVICE_PATH *)dp;
+ 
+-	dev->name[0] = L'a';
+-	dev->name[1] = L't';
+-	dev->name[2] = L'a';
+-	dev->name[3] = L'p';
+-	dev->name[4] = L'i';
++	dev->name[0] = L'n';
++	dev->name[1] = L'e';
++	dev->name[2] = L't';
+ 
+-	SPrint(dev->name+5,FILEOPS_DEVNAME_MAXLEN-5-1,  L"%d", atapi_count);
+-	atapi_count++;
++	SPrint(dev->name+3,FILEOPS_DEVNAME_MAXLEN-3-1,  L"%d", net_count);
++	net_count++;
+ 
+ 	return 0;
+ }
+ 
+ static INTN
+-scsi_device(device_t *dev, EFI_DEVICE_PATH *dp)
++harddrive_device(device_t *dev, EFI_DEVICE_PATH *dp)
+ {
+ 	//SCSI_DEVICE_PATH *scsi = (SCSI_DEVICE_PATH *)dp;
+ 
+-	dev->name[0]   = L's';
+-	dev->name[1]   = L'c';
+-	dev->name[2]   = L's';
+-	dev->name[3]   = L'i';
++	dev->name[0]   = L'h';
++	dev->name[1]   = L'd';
+ 
+-	SPrint(dev->name+4, FILEOPS_DEVNAME_MAXLEN-4-1, L"%d", scsi_count);
+-	scsi_count++;
++	SPrint(dev->name+2, FILEOPS_DEVNAME_MAXLEN-2-1, L"%d", hd_count);
++	hd_count++;
+ 
+ 	return 0;
+ }
+ 
+ static INTN
+-network_device(device_t *dev, EFI_DEVICE_PATH *dp)
++cdrom_device(device_t *dev, EFI_DEVICE_PATH *dp)
+ {
+ 	//MAC_ADDR_DEVICE_PATH *mac = (MAC_ADDR_DEVICE_PATH *)dp;
+ 
+-	dev->name[0] = L'n';
+-	dev->name[1] = L'e';
+-	dev->name[2] = L't';
++	dev->name[0] = L'c';
++	dev->name[1] = L'd';
++	dev->name[2] = L'r';
++	dev->name[3] = L'o';
++	dev->name[4] = L'm';
+ 
+-	SPrint(dev->name+3, FILEOPS_DEVNAME_MAXLEN-3-1, L"%d", net_count);
+-	net_count++;
++	SPrint(dev->name+5, FILEOPS_DEVNAME_MAXLEN-5-1, L"%d", cdrom_count);
++	cdrom_count++;
+ 
+ 	return 0;
+ }
+@@ -92,9 +90,12 @@ network_device(device_t *dev, EFI_DEVICE
+  * what we are looking for in the device path
+  */
+ static devices_types_t dev_types[]={
+-	{ MESSAGING_DEVICE_PATH, MSG_ATAPI_DP, atapi_device},
+-	{ MESSAGING_DEVICE_PATH, MSG_SCSI_DP, scsi_device},
++  //	{ MESSAGING_DEVICE_PATH, MSG_ATAPI_DP, atapi_device},
++  //	{ MESSAGING_DEVICE_PATH, MSG_SCSI_DP, scsi_device},
+ 	{ MESSAGING_DEVICE_PATH, MSG_MAC_ADDR_DP, network_device},
++	{ MEDIA_DEVICE_PATH, MEDIA_HARDDRIVE_DP, harddrive_device},
++	{ MEDIA_DEVICE_PATH, MEDIA_CDROM_DP, cdrom_device},
++	//	{ MEDIA_DEVICE_PATH, MEDIA_PROTOCOL_DP, network_device},
+ 	{ 0, 0 , NULL}
+ };
+ 
+@@ -121,6 +122,7 @@ simple_scheme(device_t *tab, UINTN n)
+ 
+ 	for(i=0; i < n; i++) {
+ 		dp = DevicePathFromHandle(tab[i].dev);
++		Print(L"New Dev :");
+ 		if (dp == NULL) {
+ 			ERR_PRT((L"cannot get device path for device %d", i));
+ 			continue;
+@@ -128,6 +130,7 @@ simple_scheme(device_t *tab, UINTN n)
+ 		dp1 = dp = UnpackDevicePath(dp);
+ 
+ 		while (!IsDevicePathEnd(dp)) {
++		  Print(L"(%d,%d) ",DevicePathType(dp),DevicePathSubType(dp) );
+ 			p = dev_types;
+ 			while (p->type) {
+ 				if (   p->type == DevicePathType(dp) 
+@@ -135,6 +138,8 @@ simple_scheme(device_t *tab, UINTN n)
+ 					(*p->device_func)(tab+i, dp);
+ 				        goto done;
+ 				}
++				//				if (DevicePathType(dp) == MEDIA_DEVICE_PATH) Print(L"Unknown : %d : %d\n", DevicePathType(dp) , DevicePathSubType(dp) );
++
+ 
+ 				p++;
+ 			}
+@@ -142,6 +147,7 @@ simple_scheme(device_t *tab, UINTN n)
+ 		}
+ done:
+        		FreePool(dp1); 
++		Print(L"\n");
+ 	}
+ 	return 0;
+ }
diff --git a/sys-boot/elilo/files/elilo-3.4 b/sys-boot/elilo/files/elilo-3.4
new file mode 100644
index 000000000000..08bbb03527f4
--- /dev/null
+++ b/sys-boot/elilo/files/elilo-3.4
@@ -0,0 +1,804 @@
+#! /bin/sh
+
+###############################################################################
+##
+## elilo installs efi bootloader onto a bootstrap partition (based on ybin)
+## Copyright (C) 2001 Ethan Benson
+##
+## This program is free software; you can redistribute it and/or
+## modify it under the terms of the GNU General Public License
+## as published by the Free Software Foundation; either version 2
+## of the License, or (at your option) any later version.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+##
+###############################################################################
+
+PATH="/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin"
+## allow to run out of /target in boot-floppies
+if [ -n "$PATH_PREFIX" ] ; then
+    PATH="${PATH}:${PATH_PREFIX}/sbin:${PATH_PREFIX}/bin:${PATH_PREFIX}/usr/sbin:${PATH_PREFIX}/usr/bin:${PATH_PREFIX}/usr/local/sbin:${PATH_PREFIX}/usr/local/bin"
+fi
+PRG="${0##*/}"
+SIGINT="$PRG: Interrupt caught ... exiting"
+VERSION=3.4-4
+DEBUG=0
+VERBOSE=0
+TMP="${TMPDIR:-/tmp}"
+TARGET=
+# Beware, /EFI/gentoo occurs with double backslashes in the script too
+# so change those as well as EFIROOT, if need be.
+EFIROOT=/EFI/gentoo
+export LC_COLLATE=C
+
+## catch signals, clean up junk in /tmp.
+trap "cleanup" 0
+trap "cleanup; exit 129" 1
+trap "echo 1>&2 $SIGINT ; cleanup; exit 130" 2
+trap "cleanup; exit 131" 3
+trap "cleanup; exit 143" 15
+
+## define default config file
+CONF=/etc/elilo.conf
+bootconf=$CONF
+ERR=" Error in $CONF:"
+
+## define default configuration
+boot=unconfigured
+
+## allow default to work on packaged and non-packaged elilo. 
+if [ -f /usr/local/lib/elilo/elilo.efi ] ; then
+    install=/usr/local/lib/elilo/elilo.efi
+elif [ -f /usr/lib/elilo/elilo.efi ] ; then
+    install=/usr/lib/elilo/elilo.efi
+fi
+
+## defaults
+efiboot=0
+autoconf=0
+fstype=vfat
+umountproc=0
+
+## elilo autoconf defaults
+label=Linux
+timeout=20
+root=/dev/sda3
+
+# image default is controlled by /etc/kernel-img.conf, if it exists
+if [ -f /etc/kernel-img.conf ] &&
+	egrep -q "^(image|link)_in_boot *= *yes" /etc/kernel-img.conf; then
+    image=/boot/vmlinuz
+else
+    image=/vmlinuz
+fi
+
+## make fake `id' if its missing, outputs 0 since if its missing we
+## are probably running on boot floppies and thus are root.
+if (command -v id > /dev/null 2>&1) ; then 
+    true
+else
+    id()
+    {
+    echo 0
+    }
+fi
+
+## --version output
+version()
+{
+echo \
+"$PRG $VERSION
+Written by Richard Hirst, based on work by Ethan Benson
+
+This is free software; see the source for copying conditions.  There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+}
+
+## --help output.
+usage()
+{
+echo \
+"Usage: $PRG [OPTION]...
+Update/install bootloader onto a bootstrap partition.
+
+  -b, --boot                 set bootstrap partition device [ -b /dev/sda1 ]
+  -i, --install              pathname to the actual bootloader binary
+                               default: /usr/{local/}lib/elilo/elilo.efi
+  -C, --config               use alternate configuration file [ -C config_file ]
+      --autoconf             auto-generate a /etc/elilo.conf
+      --efiboot              elilo auto configuration: create an efi boot
+                               manager entry for elilo
+      --timeout              elilo auto configuration: sets the time elilo
+			       will wait for user input before booting default
+                               image default: 20 (2 seconds)
+      --image                elilo auto configuration: sets the path to the
+			       kernel image. default: /vmlinuz
+      --label                elilo auto configuration: sets the image label
+                               default: Linux
+      --root                 elilo auto configuration: sets the root device
+                               default: /dev/sda3
+      --format               create a new FAT filesystem on the boot partition
+  -v, --verbose              make $PRG more verbose
+      --debug                print boring junk only useful for debugging
+  -h, --help                 display this help and exit
+  -V, --version              output version information and exit"
+}
+
+## we have to do some things differently with a retarded devfs name.
+ckdevfs()
+{
+    case "$1" in
+	/dev/ide/*|/dev/scsi/*|/dev/discs/*)
+	return 0
+	;;
+    *)
+	return 1
+	;;
+    esac
+}
+
+## the SmartArray RAID controllers use /dev/cciss/c0d0p1 kinds of names...
+ckcciss()
+{
+    case "$1" in
+	/dev/cciss/*)
+	return 0
+	;;
+    *)
+	return 1
+	;;
+    esac
+}
+
+
+## configuration file parsing. FIXME: need a method which can parse
+## image= sections.
+parseconf()
+{
+case "$1" in
+    str)
+       v=`grep "^$2[\ ,=]" "$CONF"` ; echo "${v#*=}"
+       ;;
+    flag)
+       grep "^$2\>" "$CONF" > /dev/null && echo 0 || echo 1
+       ;;
+    ck)
+       grep "^$2[\ ,=]" "$CONF" > /dev/null && echo 0 || echo 1
+       ;;
+esac
+}
+
+## check for existence of a configuration file, and make sure we have
+## read permission.
+confexist()
+{
+    if [ ! -e "$CONF" ] ; then
+	echo 1>&2 "$PRG: $CONF: No such file or directory"
+	return 1
+    elif [ ! -f "$CONF" ] ; then
+	echo 1>&2 "$PRG: $CONF: Not a regular file"
+	return 1
+    elif [ ! -r "$CONF" ] ; then
+	echo 1>&2 "$PRG: $CONF: Permission denied"
+	return 1
+    else
+	return 0
+    fi
+}
+
+## check to make sure the configuration file is sane and correct.
+## maybe this is an insane ammount of error checking, but I want to
+## make sure (hopefully) nothing unexpected ever happens.  and i just
+## like useful errors from programs.  every error just marks an error
+## variable so we give the user as much info as possible before we
+## abandon ship.
+checkconf()
+{
+    if [ ! -e "$boot" ] ; then
+	echo 1>&2 "$PRG: $boot: No such file or directory"
+	local CONFERR=1
+    elif [ ! -b "$boot" -a ! -f "$boot" ] ; then
+	echo 1>&2 "$PRG: $boot: Not a regular file or block device"
+	local CONFERR=1
+    elif [ ! -w "$boot" -o ! -r "$boot" ] ; then
+	echo 1>&2 "$PRG: $boot: Permission denied"
+	CONFERR=1
+    fi
+
+    ## sanity check, make sure boot=bootstrap and not something dumb
+    ## like /dev/hda
+    case "$boot" in
+	*hda)
+	    echo 1>&2 "$PRG:$ERR \`boot=$boot' would result in the destruction of all data on $boot"
+	    local CONFERR=1
+	    ;;
+	*sda)
+	    echo 1>&2 "$PRG:$ERR \`boot=$boot' would result in the destruction of all data on $boot"
+	    local CONFERR=1
+	    ;;
+	*disc)
+	    echo 1>&2 "$PRG:$ERR \`boot=$boot' would result in the destruction of all data on $boot"
+	    local CONFERR=1
+	    ;;
+    esac
+
+    ## now make sure its not something dumb like the root partition
+    local ROOT="$(v=`df / 2> /dev/null | grep ^/dev/` ; echo ${v%%[ ]*})"
+    local BOOT="$(v=`df /boot 2> /dev/null | grep ^/dev/` ; echo ${v%%[ ]*})"
+    if [ "$boot" = "$ROOT" ] ; then
+	echo 1>&2 "$PRG:$ERR \`boot=$boot' would result in the destruction of the root filesystem"
+	local CONFERR=1
+    elif [ "$boot" = "$BOOT" ] ; then
+	echo 1>&2 "$PRG:$ERR \`boot=$boot' would result in the destruction of the /boot filesystem"
+	local CONFERR=1
+    fi
+
+    ## Make sure boot is not already mounted
+    mount | grep "^$boot " > /dev/null
+    if [ $? = 0 ] ; then
+	echo 1>&2 "$PRG: $boot appears to be mounted"
+	local CONFERR=1
+    fi
+
+    if [ ! -e "$install" ] ; then
+	echo 1>&2 "$PRG: $install: No such file or directory"
+	local CONFERR=1
+    elif [ ! -f "$install" ] ; then
+	echo 1>&2 "$PRG: $install: Not a regular file"
+	local CONFERR=1
+    elif [ ! -r "$install" ] ; then
+	echo 1>&2 "$PRG: $install: Permission denied"
+	local CONFERR=1
+    fi
+
+    if [ ! -e "$bootconf" ] ; then
+	echo 1>&2 "$PRG: $bootconf: No such file or directory"
+	local CONFERR=1
+    elif [ ! -f "$bootconf" ] ; then
+	echo 1>&2 "$PRG: $bootconf: Not a regular file"
+	local CONFERR=1
+    elif [ ! -r "$bootconf" ] ; then
+	echo 1>&2 "$PRG: $bootconf: Permission denied"
+	local CONFERR=1
+    fi
+
+    if [ ! -d /proc/efi/vars -a "$efiboot" = 1 ] ; then
+	echo 1>&2 "$PRG: /proc/efi/vars not available, boot menu not updated"
+	efiboot=0
+    fi
+
+    if [ "$efiboot" = 1 ] ; then
+	## see if efibootmgr exists and is executable
+	if (command -v efibootmgr > /dev/null 2>&1) ; then
+	    [ -x `command -v efibootmgr` ] || MISSING=1 ; else MISSING=1
+	fi
+
+	if [ "$MISSING" = 1 ] ; then
+	    efiboot=0
+	    echo 1>&2 "$PRG: Warning: \`efibootmgr' could not be found, boot menu not updated"
+	fi
+
+	if [ -f "$boot" ] ; then
+	    echo 1>&2 "$PRG: $boot is a regular file, disabling boot menu update"
+	    efiboot=0
+	fi
+    fi
+
+    if [ "$CONFERR" = 1 ] ; then
+	return 1
+    else
+	return 0
+    fi
+}
+
+
+mnt()
+{
+    ## we can even create bootstrap filesystem images directly if you
+    ## ever wanted too.
+    if [ -f "$boot" ] ; then
+	local loop=",loop"
+    fi
+
+    if [ -e "$TMP/bootstrap.$$" ] ; then
+	echo 1>&2 "$PRG: $TMP/bootstrap.$$ exists, aborting."
+	return 1
+    fi
+
+    mkdir -m 700 "$TMP/bootstrap.$$"
+    if [ $? != 0 ] ; then
+	echo 1>&2 "$PRG: Could not create mountpoint directory, aborting."
+	return 1
+    fi
+
+    mount | grep "^$boot " > /dev/null
+    if [ $? = 0 ] ; then
+	echo 1>&2 "$PRG: $boot appears to be mounted! aborting."
+	return 1
+    fi
+
+    [ "$VERBOSE" = 1 ] && echo "$PRG: Mounting $boot..."
+    mount -t "$fstype" -o rw,noexec,umask=077$loop "$boot" "$TMP/bootstrap.$$"
+    if [ $? != 0 ] ; then
+	echo 1>&2 "$PRG: An error occured mounting $boot"
+	return 1
+    fi
+
+    TARGET="$TMP/bootstrap.$$"
+    return 0
+}
+
+copyfiles()
+{
+    local BTFILE=elilo.efi
+    local CFFILE=elilo.conf
+    local imagefiles=`grep '^image[[:space:]]*=' $bootconf | \
+		sed 's/^image[[:space:]]*=[[:space:]]*//' | grep -v ':'`
+    local initrdfiles=`grep '^[[:space:]]*initrd[[:space:]]*=' $bootconf | \
+		sed 's/.*=[[:space:]]*//' | grep -v ':'`
+
+    ## Point of no return, removing the old EFI/gentoo tree
+    rm -rf $TARGET/$EFIROOT
+    if [ $? != 0 ]; then
+	echo 2>&1 "$PRG: Failed to delete old boot files, aborting"
+	return 1
+    fi
+    mkdir -p $TARGET/$EFIROOT
+
+    ## Add a README to warn that this tree is deleted every time elilo is run
+    echo -ne "\
+This directory tree is managed by /usr/sbin/elilo, and is deleted and\n\
+recreated every time elilo runs.  Any local changes will be lost.\n\
+" > $TARGET/$EFIROOT/README.TXT
+
+    ## this is probably insecure on modern filesystems, but i think
+    ## safe on crippled hfs/dosfs.
+    [ "$VERBOSE" = 1 ] && echo "$PRG: Installing primary bootstrap $install onto $boot..."
+    cp -f "$install" "$TARGET/$EFIROOT/$BTFILE"
+    if [ $? != 0 ] ; then
+	echo 1>&2 "$PRG: An error occured while writing to $boot"
+	return 1
+    fi
+
+    [ "$VERBOSE" = 1 ] && echo "$PRG: Installing $bootconf on $boot..."
+    ## we comment out boot= and install=, because they are only really
+    ## needed in the /etc/elilo.conf file, and elilo.efi currently
+    ## doesn't understand them.  We also need to add /EFI/gentoo on to
+    ## the front of any paths that don't contain colons (device paths).
+    sed -e "s|^boot[[:space:]]*=|# &|" -e "s|^install[[:space:]]*=|# &|" \
+	-e "s|\(^image[[:space:]]*=[[:space:]]*\)\([^:]*\)$|\1$EFIROOT\2|" \
+	-e "s|\(^[[:space:]]*initrd[[:space:]]*=[[:space:]]*\)\([^:]*\)$|\1$EFIROOT\2|" \
+	< "$bootconf" > "$TARGET/$EFIROOT/$CFFILE"
+    if [ $? != 0 ] ; then
+	echo 1>&2 "$PRG: An error occured while writing to $boot"
+	return 1
+    fi
+
+    [ "$DEBUG" = 1 ] && echo "----" && cat "$TARGET/$EFIROOT/$CFFILE" && echo "----"
+
+    for i in $imagefiles $initrdfiles; do
+	[ "$VERBOSE" = 1 ] && echo "$PRG: Installing $i on $boot..."
+	if [ -f $i ]; then
+	    mkdir -p `dirname "$TARGET/$EFIROOT/$i"`
+	    if [ $? != 0 ] ; then
+		echo 1>&2 "$PRG: An error occured creating directory `dirname $EFIROOT/$i` on $boot"
+		return 1
+	    fi
+	    cp -f "$i" "$TARGET/$EFIROOT/$i"
+	    if [ $? != 0 ] ; then
+		echo 1>&2 "$PRG: An error occured writing $i to $boot"
+		return 1
+	    fi
+	else
+	    echo "$PRG: Warning: $i not found"
+	fi
+    done
+
+    sync ; sync
+
+    ## update the boot-device variable in EFI.
+    if [ "$efiboot" = 1 ] ; then
+	[ "$VERBOSE" = 1 ] && echo "$PRG: Updating EFI boot-device variable..."
+	efiquiet="-q"
+	[ "$VERBOSE" = 1 ] && efiquiet=""
+	if ckdevfs "$boot" ; then
+	    local BOOTDISK="${boot%/*}/disc"
+	    local BOOTPART="${boot##*part}"
+	elif ckcciss "$boot" ; then
+	    local BOOTDISK="${boot%p[0-9]*}"
+	    local BOOTPART="${boot##*[a-z]}"
+	else
+	    local BOOTDISK="${boot%%[0-9]*}"
+	    local BOOTPART="${boot##*[a-z]}"
+	fi
+	if [ -z "$BOOTDISK" -o -z "$BOOTPART" ] ; then
+	    echo 2>&1 "$PRG: Could not determine boot disk, aborting..."
+	    return 1
+	fi
+
+	[ "$DEBUG" = 1 ] && echo 1>&2 "$PRG: DEBUG: boot-disk      = $BOOTDISK"
+	[ "$DEBUG" = 1 ] && echo 1>&2 "$PRG: DEBUG: boot-partition = $BOOTPART"
+	# delete other entries with name "Gentoo Linux"
+	for b in `efibootmgr | grep "Gentoo Linux" | awk '{print substr($1,5,4) }'`; do
+	    efibootmgr $efiquiet -b $b -B
+	done
+	# Add a new entry for this installation
+	efibootmgr $efiquiet -c -d $BOOTDISK -p $BOOTPART -w -L "Gentoo Linux" \
+		-l \\EFI\\gentoo\\elilo.efi -u -- elilo -C \\EFI\\gentoo\\elilo.conf
+	if [ $? != 0 ] ; then
+	    echo 1>&2 "$PRG: An error occured while updating boot menu, we'll ignore it"
+	fi
+	# Now, if 2nd and 3rd boot entries are for floppy and CD/DVD,
+	# move them up to 1st and 2nd, making our entry the 3rd.
+	bootorder=$(efibootmgr | sed -n 's/^BootOrder: \(.*\)$/\1/p')
+	boot1st=$(echo $bootorder | sed -n "s/\(....\).*$/\1/p")
+	boot2nd=$(echo $bootorder | sed -n "s/....,\(....\).*$/\1/p")
+	boot3rd=$(echo $bootorder | sed -n "s/....,....,\(....\).*$/\1/p")
+	boot456=$(echo $bootorder | sed -n "s/....,....,....\(.*\).*$/\1/p")
+	name2nd=$(efibootmgr | sed -n "s/^Boot$boot2nd[\*] \(.*\)$/\1/p")
+	name3rd=$(efibootmgr | sed -n "s/^Boot$boot3rd[\*] \(.*\)$/\1/p")
+	name23="@$name2nd@$name3rd"
+	if ( echo $name23 | grep -qi "@floppy" ); then
+	    if ( echo $name23 | grep -qi "@cd") || ( echo $name23 | grep -qi "@dvd"); then
+		efibootmgr $efiquiet -o $boot2nd,$boot3rd,$boot1st$boot456
+	    fi
+	fi
+    fi
+
+    return 0
+}
+
+## mkefifs function.
+mkefifs()
+{
+    mount | grep "^$boot\>" > /dev/null
+    if [ $? = 0 ] ; then
+	echo 1>&2 "$PRG: $boot appears to be mounted! aborting."
+        return 1
+    fi
+
+    if (command -v mkdosfs > /dev/null 2>&1) ; then
+	[ -x `command -v mkdosfs` ] || FAIL=1 ; else FAIL=1 ; fi
+	if [ "$FAIL" = 1 ] ; then
+	    echo 1>&2 "$PRG: mkdosfs is not installed or cannot be found"
+	    return 1
+	fi
+
+    [ "$VERBOSE" = 1 ] && echo "$PRG: Creating DOS filesystem on $boot..."
+    mkdosfs -n bootstrap "$boot" > /dev/null
+    if [ $? != 0 ] ; then
+	echo 1>&2 "$PRG: DOS filesystem creation failed!"
+	return 1
+    fi
+    return 0
+}
+
+mkconf()
+{
+## defaults for this are defined at the beginning of the script with
+## other variables.
+
+# We want to create an append= line from the current /proc/cmdline,
+# so things like console=ttyS0 get picked up automatically.
+# We also want to filter out bits of cmdline we are not interested in.
+
+if [ -f /proc/cmdline ]; then
+  cmdline=`cat /proc/cmdline`
+else
+  echo 1>&2 "$PRG: Warning: couldn't read /proc/cmdline, may need to add append=... to elilo.conf"
+  cmdline=""
+fi
+
+append=`echo $cmdline | tr ' ' '\n' | grep -v "^BOOT_IMAGE=" | grep -v "^root=" | grep -v "^ro$" | tr '\n' ' '`
+if [ ! -z "$append" ]; then append="append=\"$append\""; fi
+
+echo \
+"## elilo configuration file generated by elilo $VERSION
+
+install=$install
+boot=$boot
+delay=$timeout
+default=$label
+$append
+
+image=$image
+	label=$label
+	root=$root
+	read-only
+
+image=${image}.old
+	label=${label}OLD
+	root=$root
+	read-only
+" > "$TMPCONF" || return 1
+
+    ## Copy the new elilo.conf to /etc
+    if [ -f $CONF ]; then
+	echo 1>&2 "$PRG: backing up existing $CONF as ${CONF}-"
+	rm -f ${CONF}-
+	mv $CONF ${CONF}-
+    fi
+    cp -f "$TMPCONF" "$CONF"
+    if [ $? != 0 ] ; then
+	echo 1>&2 "$PRG: An error occured while writing to $conf"
+	return 1
+    fi
+
+return 0
+}
+
+# check partition will be big enough for all we want to add to it
+
+chkspace()
+{
+    local imagefiles=`grep '^image[[:space:]]*=' $bootconf | \
+		sed 's/^image[[:space:]]*=[[:space:]]*//' | grep -v ':'`
+    local initrdfiles=`grep '^[[:space:]]*initrd[[:space:]]*=' $bootconf | \
+		sed 's/.*=[[:space:]]*//' | grep -v ':'`
+    local bytesneeded=`cat $imagefiles $initrdfiles $install $bootconf 2>/dev/null | wc -c`
+    # convert to KB, allowing 5% overhead
+    local kbneeded=$(( bytesneeded / 1024 + bytesneeded / 20480 ))
+    local kbavailable=$(df -k $TARGET | sed -n "s|^$boot[[:space:]]\+[0-9]\+[[:space:]]\+[0-9]\+[[:space:]]\+\([0-9]\+\).*$|\1|p")
+    if [ -z $kbavailable ]; then
+	echo 2>&1 "$PRG: unable to determine space on $boot, aborting"
+	return 1
+    fi
+    if [ -d $TARGET/$EFIROOT ]; then
+	local kbused=$(du -ks $TARGET/$EFIROOT | sed -n "s/[ 	].*$//p")
+    else
+        local kbused=0
+    fi
+    [ "$VERBOSE" = 1 ] && echo "$PRG: ${kbneeded}KB needed, ${kbavailable}KB free, ${kbused}KB to reuse"
+    kbavailable=$(( kbavailable + kbused ))
+    if [ "$kbavailable" -lt "$kbneeded" ] ; then
+        echo 1>&2 "$PRG: Insufficient space on $boot, need ${kbneeded}KB, only ${kbavailable}KB available"
+        return 1
+    fi
+return 0
+}
+
+
+## take out the trash.
+cleanup()
+{
+    if [ -n "$TARGET" ]; then
+	TARGET=
+        [ "$VERBOSE" = 1 ] && echo "$PRG: Unmounting $boot"
+	umount "$boot"
+	[ $? != 0 ] && echo 2>&1 "$PRG: Warning, failed to unmount $TARGET"
+    fi
+    if [ -n "$TMPCONF" ] ; then rm -f "$TMPCONF" ; fi
+    if [ -d "$TMP/bootstrap.$$" ] ; then rmdir "$TMP/bootstrap.$$" ; fi
+    if [ "$umountproc" = 1 ] ; then umount /proc ; fi
+    return 0
+}
+
+##########
+## Main ##
+##########
+
+## absurdly bloated case statement to parse command line options.
+if [ $# != 0 ] ; then
+    while true ; do
+	case "$1" in 
+	    -V|--version)
+		version
+		exit 0
+		;;
+	    -h|--help)
+		usage
+		exit 0
+		;;
+	    --debug)
+		DEBUG=1
+		shift
+		;;
+	    -v|--verbose)
+		VERBOSE=1
+		shift
+		;;
+	    --force)
+		# allow --force for now, boot-floppies 3.0.20 and
+		# systemconfigurator use that instead of --format
+		echo 1>&2 "$PRG: Warning: --force is now deprecated.  Use --for\mat."
+		echo 1>&2 "Try \`$PRG --help' for more information."
+		FORMAT=yes
+		shift
+		;;
+	    --format)
+		FORMAT=yes
+		shift
+		;;
+	    --autoconf)
+		autoconf=1
+		shift
+		;;
+	    -b|--boot)
+		if [ -n "$2" ] ; then
+		    boot="$2"
+		    ARGBT=1
+		    shift 2
+		else
+		    echo 1>&2 "$PRG: option requires an argument $1"
+		    echo 1>&2 "Try \`$PRG --help' for more information."
+		    exit 1
+		fi
+		;;
+	    -i|--install)
+		if [ -n "$2" ] ; then
+		    install="$2"
+		    ARGBF=1
+		    shift 2
+		else
+		    echo 1>&2 "$PRG: option requires an argument $1"
+		    echo 1>&2 "Try \`$PRG --help' for more information."
+		    exit 1
+		fi
+		;;
+	    -C|--config)
+		if [ -n "$2" ] ; then
+		    CONF="$2"
+		    bootconf="$2"
+		    ERR=" Error in $CONF:"
+		    shift 2
+		else
+		    echo 1>&2 "$PRG: option requires an argument $1"
+		    echo 1>&2 "Try \`$PRG --help' for more information."
+		    exit 1
+		fi
+		;;
+	    --efiboot)
+		efiboot=1
+		ARGNV=1
+		shift
+		;;
+	    --timeout)
+		if [ -n "$2" ] ; then
+		    timeout="$2"
+		    bootconf=auto
+		    shift 2
+		else
+		    echo 1>&2 "$PRG: option requires an argument $1"
+		    echo 1>&2 "Try \`$PRG --help' for more information."
+		    exit 1
+		fi
+		;;
+	    --image)
+		if [ -n "$2" ] ; then
+		    image="$2"
+		    bootconf=auto
+		    shift 2
+		else
+		    echo 1>&2 "$PRG: option requires an argument $1"
+		    echo 1>&2 "Try \`$PRG --help' for more information."
+		    exit 1
+		fi
+		;;
+	    --label)
+		if [ -n "$2" ] ; then
+		    label="$2"
+		    bootconf=auto
+		    shift 2
+		else
+		    echo 1>&2 "$PRG: option requires an argument $1"
+		    echo 1>&2 "Try \`$PRG --help' for more information."
+		    exit 1
+		fi
+		;;
+	    --root)
+		if [ -n "$2" ] ; then
+		    root="$2"
+		    bootconf=auto
+		    shift 2
+		else
+		    echo 1>&2 "$PRG: option requires an argument $1"
+		    echo 1>&2 "Try \`$PRG --help' for more information."
+		    exit 1
+		fi
+		;;
+	    "")
+		break
+		;;
+	    *)
+		echo 1>&2 "$PRG: unrecognized option \`$1'"
+		echo 1>&2 "Try \`$PRG --help' for more information."
+		exit 1
+		;;
+	esac
+    done
+fi
+
+## check that are root
+if [ `id -u` != 0 ] ; then
+    echo 1>&2 "$PRG: requires root privileges, go away."
+    exit 1
+fi
+
+## check that autoconf options are only specified with --autoconf
+if [ "$bootconf" = "auto" -a "$autoconf" = "0" ] ; then
+    echo 1>&2 "$PRG: Auto-config options specified without --autoconf."
+    exit 1;
+fi
+
+## check that specified config file exists, unless we are to generate it,
+## which case we assume all options are done on the command line.
+if [ "$autoconf" = "0" ] ; then
+    confexist || exit 1
+fi
+
+## /proc is needed to parse /proc/partitions, etc.
+if [ ! -f /proc/uptime ]; then
+    [ "$VERBOSE" = 1 ] && echo "$PRG: Mounting /proc..."
+    mount -t proc proc /proc 2> /dev/null
+    if [ $? != 0 ]; then
+	echo 1>&2 "$PRG: Failed to mount /proc, aborting."
+	exit 1
+    fi
+    umountproc=1
+fi
+
+## elilo.conf autogeneration. MUST have secure mktemp to
+## avoid race conditions. GNU's mktemp qualifies.
+if [ "$autoconf" = "1" ] ; then
+    TMPCONF=`mktemp -q "$TMP/$PRG.XXXXXX"`
+    if [ $? != 0 ] ; then
+	echo 1>&2 "$PRG: Could not create temporary file, aborting."
+	exit 1
+    fi
+    mkconf
+    if [ $? != 0 ] ; then
+	echo 1>&2 "$PRG: An error occured generating elilo.conf, aborting."
+	exit 1
+    fi
+
+    bootconf="$TMPCONF"
+fi
+
+## Checks if each option was defined on the command line, and if so
+## don't read it from the configuration file. this avoids
+## configuration options from being set null, as well as command line
+## options from being clobbered.
+[ "$ARGBT" != 1 -a $(parseconf ck boot) = 0 ] && boot=`parseconf str boot`
+
+## ffs!! rtfm! foad!
+if [ "$boot" = unconfigured ] ; then
+    echo 1>&2 "$PRG: You must specify the device for the bootstrap partition. (ie: -b /dev/hdaX)"
+    echo 1>&2 "$PRG: Try \`$PRG --help' for more information."
+    exit 1
+fi
+
+## validate configuration for sanity.
+checkconf || exit 1
+
+if [ "$FORMAT" = "yes" ]; then
+    mkefifs || exit 1
+fi
+
+[ "$VERBOSE" = 1 ] && echo "$PRG: Checking filesystem on $boot..."
+dosfsck $boot > /dev/null
+if [ $? != 0 ]; then
+    echo 1>&2 "$PRG: Filesystem on $boot is corrupt, please fix that and rerun $PRG."
+    exit 1
+fi
+
+mnt || exit 1
+chkspace || exit 1
+copyfiles || exit 1
+
+umount $TARGET
+if [ $? != 0 ]; then
+    echo 1>&2 "$PRG: Failed to unmount $boot"
+    exit 1
+fi
+TARGET=
+
+[ "$VERBOSE" = 1 ] && echo "$PRG: Installation complete."
+
+exit 0
diff --git a/sys-boot/elilo/files/elilo-3.4-makefile.patch b/sys-boot/elilo/files/elilo-3.4-makefile.patch
new file mode 100644
index 000000000000..2a315c0352f6
--- /dev/null
+++ b/sys-boot/elilo/files/elilo-3.4-makefile.patch
@@ -0,0 +1,8 @@
+--- elilo-3.4/Make.defaults.makefile	2002-10-08 20:50:27.000000000 +0200
++++ elilo-3.4/Make.defaults	2003-05-26 14:59:04.000000000 +0200
+@@ -123,3 +121,5 @@
+   OBJCOPY	= $(prefix)objcopy
+  endif
+ endif
++
++CFLAGS += $(shell if $(CC) -fno-merge-constants -S -o /dev/null -xc /dev/null >/dev/null 2>&1; then echo "-fno-merge-constants"; fi)
diff --git a/sys-boot/elilo/files/elilo.8-3.4 b/sys-boot/elilo/files/elilo.8-3.4
new file mode 100644
index 000000000000..a88dcec3d015
--- /dev/null
+++ b/sys-boot/elilo/files/elilo.8-3.4
@@ -0,0 +1,113 @@
+.TH ELILO 8 "18 Mar 2002"
+.SH NAME
+elilo \- install EFI boot loader
+.SH SYNOPSIS
+.B elilo
+.RI [ options ]
+.SH DESCRIPTION
+This manual page documents briefly the
+.B elilo
+command, which was written specifically for the Debian distribution to
+simplify configuring and using the elilo.efi bootloader.  The command works
+equally on Gentoo Linux.
+.sp
+There are two parts to elilo, the bootloader itself and this utility which
+installs or updates a bootload configuration.
+.sp
+The primary function of elilo is to copy files necessary for booting
+Gentoo Linux from the main filesystem to a subdirectory /EFI/gentoo
+on the boot partition.  These include elilo.efi, elilo.conf, and the kernel
+and ramdisk images referenced by elilo.conf.  
+.sp
+In addition, elilo can create a default
+configuration file, /etc/elilo.conf, and can invoke efibootmgr to create
+an entry in the EFI Boot Manager menu such that a system will autoboot
+in to Gentoo Linux on power up.
+.sp
+.B elilo 
+requires a couple of extra parameters in elilo.conf that elio.efi does
+not currently support. 
+These are needed so that a normal run of elilo with no parameters can find 
+the elilo.efi binary and boot partition in order to rebuild it.
+They are:
+.sp
+install=<path to elilo.efi>
+.br
+boot=<boot partition>
+.sp
+.SH OPTIONS
+This program follows the usual GNU command line syntax, with long
+options starting with two dashes (`-').
+.TP
+.B \-b, \-\-boot
+set bootstrap partition device [ -b /dev/sda1 ]
+.TP
+.B \-i, \-\-install
+pathname to the actual bootloader binary,
+default: /usr/{local/}lib/elilo/elilo.efi
+.TP
+.B \-C, \-\-config
+use alternate configuration file [ -C config_file ]
+.TP
+.B \-\-autoconf
+auto-generate a /etc/elilo.conf.  Typically only used during system
+installation.  In normal use, an elilo.conf file already exists and will not
+be modified by elilo.
+.TP
+.B \-\-efiboot
+elilo auto configuration: create an efi boot manager entry for elilo.  This
+option requires that the 
+.B efibootmgr
+package also be installed.
+.TP
+.B \-\-timeout
+elilo auto configuration: sets the time elilo
+will wait for user input before booting default
+image default: 20 (2 seconds)
+.TP
+.B \-\-image
+elilo auto configuration: sets the path to the
+kernel image. default: /vmlinuz
+.TP
+.B \-\-label
+elilo auto configuration: sets the image label
+default: Linux
+.TP
+.B \-\-root
+elilo auto configuration: sets the root device default: /dev/sda3
+.TP
+.B \-\-format
+create a new FAT filesystem on the boot partition.  Use this cautiously if
+you have more than one operating system installed, and they may be sharing
+the same EFI partition!
+.TP
+.B \-v, \-\-verbose
+make elilo more verbose
+.TP
+.B \-\-debug
+print boring junk only useful for debugging
+.TP
+.B \-h, \-\-help
+display this help and exit
+.TP
+.B \-V, \-\-version
+output version information and exit
+.SH FILES
+.I /etc/elilo.conf	
+.br
+.I /usr/lib/elilo/elilo.efi 
+.SH SEE ALSO
+.BR efibootmgr (8)
+.sp
+Additional information about 
+.B elilo
+is available in the /usr/share/doc/elilo directory.
+.SH AUTHOR
+The
+.B elilo
+program and this manual page were written by 
+Richard Hirst <rhirst@linuxcare.com> and Bdale Garbee <bdale@gag.com> 
+as additions to the 
+.B elilo
+bootloader package from Stephane Eranian <eranian@hpl.hp.com>
+for the Debian GNU/Linux system (but may be used by others).  
diff --git a/sys-boot/elilo/files/eliloalt.8-3.4 b/sys-boot/elilo/files/eliloalt.8-3.4
new file mode 100644
index 000000000000..81bcdf6e80a8
--- /dev/null
+++ b/sys-boot/elilo/files/eliloalt.8-3.4
@@ -0,0 +1,20 @@
+.TH ELILOALT 8 "18 Mar 2002"
+.SH NAME
+eliloalt \- manipulate elilo alternate
+.SH SYNOPSIS
+.B eliloalt
+.RI [ options ]
+.SH DESCRIPTION
+The
+.B eliloalt 
+command makes it possible to coerce elilo to boot an alternate
+kernel configuration one time only, as when engaging in kernel development or
+debugging.
+.sp
+.SH SEE ALSO
+Additional information about 
+.B eliloalt
+is available in the /usr/share/doc/elilo directory.
+.SH AUTHOR
+This manual page was written by Bdale Garbee <bdale@gag.com> 
+for the Debian GNU/Linux system (but may be used by others).