Use patch tarball.

(Portage version: 2.1.10.49/cvs/Linux i686)

8 files changed, 20 insertions, 968 deletions

diff --git a/net-print/hplip/ChangeLog b/net-print/hplip/ChangeLog
index 933378ed56f2..619bbf8f4c5c 100644
--- a/net-print/hplip/ChangeLog
+++ b/net-print/hplip/ChangeLog
@@ -1,6 +1,13 @@
 # ChangeLog for net-print/hplip
 # Copyright 1999-2012 Gentoo Foundation; Distributed under the GPL v2
-# $Header: /var/cvsroot/gentoo-x86/net-print/hplip/ChangeLog,v 1.225 2012/05/06 11:00:22 billie Exp $
+# $Header: /var/cvsroot/gentoo-x86/net-print/hplip/ChangeLog,v 1.226 2012/05/06 11:42:45 billie Exp $
+
+  06 May 2012; Daniel Pielmeier <billie@gentoo.org>
+  -files/hplip-3.11.12-black-stripes-pcl5c.patch,
+  -files/hplip-3.11.12-fast-pp.patch, -files/hplip-3.11.12-udev-rules.patch,
+  hplip-3.12.2-r2.ebuild, -files/hplip-3.12.2-minimal.patch,
+  -files/hplip-3.12.2-sane.patch, hplip-3.12.4.ebuild:
+  Use patch tarball.
 
   06 May 2012; Daniel Pielmeier <billie@gentoo.org> hplip-3.12.4.ebuild,
   -files/hplip-3.12.4-cupsddk.patch, -files/hplip-3.12.4-desktop.patch,
diff --git a/net-print/hplip/files/hplip-3.11.12-black-stripes-pcl5c.patch b/net-print/hplip/files/hplip-3.11.12-black-stripes-pcl5c.patch
deleted file mode 100644
index 288a887a7a44..000000000000
--- a/net-print/hplip/files/hplip-3.11.12-black-stripes-pcl5c.patch
+++ /dev/null
@@ -1,11 +0,0 @@
-diff -up hplip-3.10.2/prnt/hpcups/LJColor.h.skip-blank-lines hplip-3.10.2/prnt/hpcups/LJColor.h
---- hplip-3.10.2/prnt/hpcups/LJColor.h.skip-blank-lines	2010-02-24 23:04:09.000000000 +0000
-+++ hplip-3.10.2/prnt/hpcups/LJColor.h	2010-04-15 21:46:48.375754707 +0100
-@@ -48,6 +48,7 @@ public:
-     DRIVER_ERROR    Configure(Pipeline **pipeline);
-     DRIVER_ERROR    EndJob();
-     DRIVER_ERROR    FormFeed();
-+    bool            CanSkipRasters() {return false;}
- protected:
-     virtual DRIVER_ERROR addJobSettings();
-     void    configureRasterData();
diff --git a/net-print/hplip/files/hplip-3.11.12-fast-pp.patch b/net-print/hplip/files/hplip-3.11.12-fast-pp.patch
deleted file mode 100644
index 95170e9f514b..000000000000
--- a/net-print/hplip/files/hplip-3.11.12-fast-pp.patch
+++ /dev/null
@@ -1,855 +0,0 @@
-Speed up HPLIP's parallel port I/O
-
-HPLIP should stop emulating IEE1284 ECP in userspace; that requires so many
-ioctls that it's uncomfortably (and sometimes unusably) slow, even on fast
-systems.  Instead, it should use ppdev read/write calls, working around ppdev
-quirks/bugs as necessary.
-
-Until now, we avoided this because we feared that using ppdev would make us
-susceptible to variations in PC parallel port hardware.  However, it turns out
-that the kernel already addresses that problem: on PCs, the kernel defaults to
-software-emulated ECP, which is exactly what the current HPLIP code does.
-Using the kernel code avoids the massive ioctl overhead, and it makes it
-possible to use hardware-accelerated ECP in those cases where it works.
-
-To apply this patch, 'cd' into the unpacked hplip source directory and run:
-$ patch -p1 <../hplip-fast-pp-v2.patch
-$ libtoolize --force
-$ AUTOMAKE="automake --foreign" autoreconf
-(Remember to use the --enable-pp-build option with ./configure)
-
-Patch by Daniel Gnoutcheff <daniel@gnoutcheff.name>
-Thanks to Daniel Pielmeir for figuring out the autotools bits
-
-diff -ur hplip-3.12.2/configure.in hplip-3.12.2-fast-pp/configure.in
---- hplip-3.12.2/configure.in	2012-02-01 06:56:29.000000000 -0500
-+++ hplip-3.12.2-fast-pp/configure.in	2012-02-20 21:09:45.850744922 -0500
-@@ -222,6 +222,7 @@
- else
-    AC_MSG_RESULT(no)
- fi
-+AM_CONDITIONAL(PP_BUILD, test x$pp_build = xyes)
-    
- AC_MSG_CHECKING([for scanner build])
- AC_ARG_ENABLE(scan_build,
-diff -ur hplip-3.12.2/io/hpmud/pp.c hplip-3.12.2-fast-pp/io/hpmud/pp.c
---- hplip-3.12.2/io/hpmud/pp.c	2012-02-01 06:53:52.000000000 -0500
-+++ hplip-3.12.2-fast-pp/io/hpmud/pp.c	2012-02-20 19:28:27.990747569 -0500
-@@ -28,6 +28,8 @@
- 
- #include "hpmud.h"
- #include "hpmudi.h"
-+#include <signal.h>
-+#include <time.h>
- 
- mud_device_vf __attribute__ ((visibility ("hidden"))) pp_mud_device_vf = 
- {
-@@ -67,17 +69,6 @@
-    .channel_read = musb_dot4_channel_read
- };
- 
--static int frob_control(int fd, unsigned char mask, unsigned char val)
--{
--   struct ppdev_frob_struct frob;
--
--   /* Convert ieee1284 control values to PC-style (invert Strobe, AutoFd and Select) . */
--   frob.val = val ^ (mask & (PARPORT_CONTROL_STROBE | PARPORT_CONTROL_AUTOFD | PARPORT_CONTROL_SELECT));
--
--   frob.mask = mask;
--   return ioctl(fd, PPFCONTROL, &frob);
--}
--
- static unsigned char read_status(int fd)
- {
-    unsigned char status;
-@@ -88,493 +79,6 @@
-    return (status ^ PARPORT_STATUS_BUSY); 
- } 
- 
--static int wait_status(int fd, unsigned char mask, unsigned char val, int usec)
--{
--   struct timeval tmo, now;
--   struct timespec min;
--   unsigned char status;
--   int cnt=0;
--   
--   gettimeofday (&tmo, NULL);
--   tmo.tv_usec += usec;
--   tmo.tv_sec += tmo.tv_usec / 1000000;
--   tmo.tv_usec %= 1000000;
--
--   min.tv_sec = 0;
--   min.tv_nsec = 5000000;  /* 5ms */
--
--   while (1)
--   {
--      status = read_status(fd);
--      if ((status & mask) == val)
--      {
--	//         bug("found status=%x mask=%x val=%x cnt=%d: %s %d\n", status, mask, val, cnt, __FILE__, __LINE__);
--         return 0;
--      } 
--      cnt++;
--      //      nanosleep(&min, NULL);
--      gettimeofday(&now, NULL);
--      if ((now.tv_sec > tmo.tv_sec) || (now.tv_sec == tmo.tv_sec && now.tv_usec > tmo.tv_usec))
--      {
--         DBG("wait_status timeout status=%x mask=%x val=%x us=%d\n", status, mask, val, usec);
--         return -1;   /* timeout */
--      }
--   }
--}
--
--static int wait(int usec)
--{
--   struct timeval tmo, now;
--   int cnt=0;
--   
--   gettimeofday (&tmo, NULL);
--   tmo.tv_usec += usec;
--   tmo.tv_sec += tmo.tv_usec / 1000000;
--   tmo.tv_usec %= 1000000;
--
--   while (1)
--   {
--      cnt++;
--      gettimeofday(&now, NULL);
--      if ((now.tv_sec > tmo.tv_sec) || (now.tv_sec == tmo.tv_sec && now.tv_usec > tmo.tv_usec))
--      {
--         return 0;   /* timeout */
--      }
--   }
--}
--
--static int ecp_is_fwd(int fd)
--{
--   unsigned char status;
--
--   status = read_status(fd);
--   if ((status & PARPORT_STATUS_PAPEROUT) == PARPORT_STATUS_PAPEROUT)
--      return 1;
--   return 0;
--}
--
--static int ecp_is_rev(int fd)
--{
--   unsigned char status;
--
--   status = read_status(fd);
--   if ((status & PARPORT_STATUS_PAPEROUT) == 0)
--      return 1;
--   return 0;
--}
--
--static int ecp_rev_to_fwd(int fd)
--{
--   int dir=0;
--
--   if (ecp_is_fwd(fd))
--      return 0;
--
--   /* Event 47: write NReverseRequest/nInit=1 */
--   frob_control(fd, PARPORT_CONTROL_INIT, PARPORT_CONTROL_INIT);
--
--   /* Event 48: wait PeriphClk/nAck=1, PeriphAck/Busy=0 */
--   //   wait_status(fd, PARPORT_STATUS_PAPEROUT | PARPORT_STATUS_BUSY, PARPORT_STATUS_PAPEROUT, SIGNAL_TIMEOUT);
--
--   /* Event 49: wait nAckReverse/PError=1 */
--   wait_status(fd, PARPORT_STATUS_PAPEROUT, PARPORT_STATUS_PAPEROUT, PP_SIGNAL_TIMEOUT);
--
--   ioctl(fd, PPDATADIR, &dir);
--
--   return 0;
--}
--
--static int ecp_fwd_to_rev(int fd)
--{
--   int dir=1;
--
--   if (ecp_is_rev(fd))
--      return 0;
--
--   /* Event 33: NPeriphRequest/nFault=0, PeriphAck/Busy=0 */
--   wait_status(fd, PARPORT_STATUS_BUSY | PARPORT_STATUS_ERROR, 0, PP_DEVICE_TIMEOUT);
--
--   /* Event 38: write HostAck/nAutoFd=0 */
--   ioctl(fd, PPDATADIR, &dir);
--   frob_control(fd, PARPORT_CONTROL_AUTOFD, 0);
--   wait(PP_SETUP_TIMEOUT);
--   
--   /* Event 39: write NReverseRequest/nInit=0 (start bus reversal) */
--   frob_control(fd, PARPORT_CONTROL_INIT, 0);
--
--   /* Event 40: wait nAckReverse/PError=0 */
--   wait_status(fd, PARPORT_STATUS_PAPEROUT, 0, PP_SIGNAL_TIMEOUT);
--
--   return 0;
--}
--
--static int ecp_write_addr(int fd, unsigned char data)
--{
--   int cnt=0, len=0;
--   unsigned d=(data | 0x80); /* set channel address bit */
--
--   ecp_rev_to_fwd(fd);
--
--   /* Event 33: PeriphAck/Busy=0 */
--   if (wait_status(fd, PARPORT_STATUS_BUSY, 0, PP_SIGNAL_TIMEOUT))
--   {
--      BUG("ecp_write_addr transfer stalled\n"); 
--      goto bugout;
--   }
--
--   while (1)
--   {   
--      /* Event 34: write HostAck/nAutoFD=0 (channel command), data */
--      frob_control(fd, PARPORT_CONTROL_AUTOFD, 0);
--      ioctl(fd, PPWDATA, &d);
--
--      /* Event 35: write HostClk/NStrobe=0 */
--      frob_control(fd, PARPORT_CONTROL_STROBE, 0);
--
--      /* Event 36: wait PeriphAck/Busy=1 */
--      if (wait_status(fd, PARPORT_STATUS_BUSY, PARPORT_STATUS_BUSY, PP_SIGNAL_TIMEOUT))
--      {
--
--         /* Event 72: write NReverseRequest/nInit=0 (Host Transfer Recovery) */
--         frob_control(fd, PARPORT_CONTROL_INIT, 0);
--
--         /* Event 73: wait nAckReverse/PError=0 */
--         wait_status(fd, PARPORT_STATUS_PAPEROUT, 0, PP_SIGNAL_TIMEOUT);
--
--         /* Event 74: write NReverseRequest/nInit=1 */
--         frob_control(fd, PARPORT_CONTROL_INIT, PARPORT_CONTROL_INIT);
--
--         /* Event 75: wait nAckReverse/PError=1 */
--         wait_status(fd, PARPORT_STATUS_PAPEROUT, PARPORT_STATUS_PAPEROUT, PP_SIGNAL_TIMEOUT);
--
--         cnt++;
--         if (cnt > 4)
--         {
--            BUG("ecp_write_addr transfer stalled\n"); 
--            goto bugout;
--         }
--         BUG("ecp_write_addr host transfer recovery cnt=%d\n", cnt); 
--         continue;  /* retry */
--      }
--      break;  /* done */
--   } /* while (1) */
--
--   len = 1;
--      
--bugout:
--
--   /* Event 37: write HostClk/NStrobe=1 */
--   frob_control(fd, PARPORT_CONTROL_STROBE, PARPORT_CONTROL_STROBE);
--
--   return len;
--}
--
--static int ecp_write_data(int fd, unsigned char data)
--{
--   int cnt=0, len=0;
--
--   //   ecp_rev_to_fwd(fd);
--
--   /* Event 33: check PeriphAck/Busy=0 */
--   if (wait_status(fd, PARPORT_STATUS_BUSY, 0, PP_SIGNAL_TIMEOUT))
--   {
--      BUG("ecp_write_data transfer stalled\n"); 
--      goto bugout;
--   }
--
--   while (1)
--   {   
--      /* Event 34: write HostAck/nAutoFD=1 (channel data), data */
--      frob_control(fd, PARPORT_CONTROL_AUTOFD, PARPORT_CONTROL_AUTOFD);
--      ioctl(fd, PPWDATA, &data);
--
--      /* Event 35: write HostClk/NStrobe=0 */
--      frob_control(fd, PARPORT_CONTROL_STROBE, 0);
--
--      /* Event 36: wait PeriphAck/Busy=1 */
--      if (wait_status(fd, PARPORT_STATUS_BUSY, PARPORT_STATUS_BUSY, PP_SIGNAL_TIMEOUT))
--      {
--
--         /* Event 72: write NReverseRequest/nInit=0 (Host Transfer Recovery) */
--         frob_control(fd, PARPORT_CONTROL_INIT, 0);
--
--         /* Event 73: wait nAckReverse/PError=0 */
--         wait_status(fd, PARPORT_STATUS_PAPEROUT, 0, PP_SIGNAL_TIMEOUT);
--
--         /* Event 74: write NReverseRequest/nInit=1 */
--         frob_control(fd, PARPORT_CONTROL_INIT, PARPORT_CONTROL_INIT);
--
--         /* Event 75: wait nAckReverse/PError=1 */
--         wait_status(fd, PARPORT_STATUS_PAPEROUT, PARPORT_STATUS_PAPEROUT, PP_SIGNAL_TIMEOUT);
--
--         cnt++;
--         if (cnt > 4)
--         {
--            BUG("ecp_write_data transfer stalled\n"); 
--            goto bugout;
--         }
--         BUG("ecp_write_data host transfer recovery cnt=%d\n", cnt); 
--         continue;  /* retry */
--      }
--      break;  /* done */
--   } /* while (1) */
--
--   len = 1;
--      
--bugout:
--
--   /* Event 37: write HostClk/NStrobe=1 */
--   frob_control(fd, PARPORT_CONTROL_STROBE, PARPORT_CONTROL_STROBE);
--
--   return len;
--}
--
--static int ecp_read_data(int fd, unsigned char *data)
--{
--   int len=0;
--
--   //   ecp_fwd_to_rev(fd);
--
--   /* Event 43: wait PeriphClk/NAck=0 */
--   if (wait_status(fd, PARPORT_STATUS_ACK, 0, PP_SIGNAL_TIMEOUT))
--   {
--      len = -1;
--      goto bugout;
--   }
--   ioctl(fd, PPRDATA, data);
--
--   /* Event 44: write HostAck/nAutoFd=1 */
--   frob_control(fd, PARPORT_CONTROL_AUTOFD, PARPORT_CONTROL_AUTOFD);
--
--   /* Event 45: wait PeriphClk/NAck=1 */
--   wait_status(fd, PARPORT_STATUS_ACK, PARPORT_STATUS_ACK, PP_SIGNAL_TIMEOUT);
--
--   /* Event 46: write HostAck/nAutoFd=0 */
--   frob_control(fd, PARPORT_CONTROL_AUTOFD, 0);
--
--   len = 1;
--      
--bugout:
--
--   return len;
--}
--
--static int ecp_read(int fd, void *buffer, int size, int usec)
--{
--   int i=0;
--   unsigned char *p = (unsigned char *)buffer;
--   
--   ecp_fwd_to_rev(fd);
--
--   while (i < size)
--   {
--      if (ecp_read_data(fd, p+i) != 1)
--      {
--         usec-=PP_SIGNAL_TIMEOUT;
--         if (usec > 0)
--            continue;
--
--//         return -1;
--         return -ETIMEDOUT;   /* timeout */
--      }
--      i++;
--   }
--   return i;
--}
--
--static int ecp_write(int fd, const void *buffer, int size)
--{
--   int i;
--   unsigned char *p = (unsigned char *)buffer;
--   static int timeout=0;
--
--   if (timeout)
--   {
--      timeout=0;
--      return -1;        /* report timeout */
--   }
--   
--   ecp_rev_to_fwd(fd);
--
--   for (i=0; i < size; i++)
--   {
--      if (ecp_write_data(fd, p[i]) != 1)
--      {
--         if (i)
--            timeout=1;  /* save timeout, report bytes written */
--         else
--            i=-1;       /* report timeout */
--         break;
--      }
--   }
--   return i;
--}
--
--static int nibble_read_data(int fd, unsigned char *data)
--{
--   int len=0;
--   unsigned char nibble;   
--
--   /* Event 7: write HostBusy/nAutoFd=0 */
--   frob_control(fd, PARPORT_CONTROL_AUTOFD, 0);
--
--   /* Event 8: peripheral sets low-order nibble. */
--
--   /* Event 9: wait PtrClk/NAck=0 */
--   if (wait_status(fd, PARPORT_STATUS_ACK, 0, PP_SIGNAL_TIMEOUT))
--   {
--      len = -1;
--      goto bugout;
--   }
--   nibble = read_status(fd) >> 3;
--   nibble = ((nibble & 0x10) >> 1) | (nibble & 0x7);
--   *data = nibble;
--
--   /* Event 10: write HostBusy/nAutoFd=1 */
--   frob_control(fd, PARPORT_CONTROL_AUTOFD, PARPORT_CONTROL_AUTOFD);
--
--   /* Event 11: wait PtrClk/NAck=1 */
--   wait_status(fd, PARPORT_STATUS_ACK, PARPORT_STATUS_ACK, PP_SIGNAL_TIMEOUT);
--
--   /* Event 7: write HostBusy/nAutoFd=0 */
--   frob_control(fd, PARPORT_CONTROL_AUTOFD, 0);
--
--   /* Event 8: peripheral sets high-order nibble. */
--
--   /* Event 9: wait PtrClk/NAck=0 */
--   if (wait_status(fd, PARPORT_STATUS_ACK, 0, PP_SIGNAL_TIMEOUT))
--   {
--      len = -1;
--      goto bugout;
--   }
--   nibble = read_status(fd) >> 3;
--   nibble = ((nibble & 0x10) >> 1) | (nibble & 0x7);
--   *data |= (nibble<<4);
--
--   /* Event 10: write HostBusy/nAutoFd=1 */
--   frob_control(fd, PARPORT_CONTROL_AUTOFD, PARPORT_CONTROL_AUTOFD);
--
--   /* Event 11: wait PtrClk/NAck=1 */
--   wait_status(fd, PARPORT_STATUS_ACK, PARPORT_STATUS_ACK, PP_SIGNAL_TIMEOUT);
--
--   len = 1;
--      
--bugout:
--
--   return len;
--}
--
--static int nibble_read(int fd, int flag, void *buffer, int size, int usec)
--{
--   int i=0;
--   unsigned char *p = (unsigned char *)buffer;
--   int m = IEEE1284_MODE_NIBBLE | flag;
--   int mc = IEEE1284_MODE_COMPAT;
--   unsigned char status;
--
--   ioctl (fd, PPNEGOT, &mc);
--   if (ioctl (fd, PPNEGOT, &m))
--   {
--      DBG("nibble_read negotiation failed: %m\n");
--      return -1;
--   }
--
--   while (i < size)
--   {
--      if (nibble_read_data(fd, p+i) != 1)
--      {
--         usec-=PP_SIGNAL_TIMEOUT;
--         if (usec > 0)
--            continue;
--
--//         return -1;
--         return -ETIMEDOUT;   /* timeout */
--      }
--
--      i++;
--
--      /* More data? */
--      status = read_status(fd);
--      if (status & PARPORT_STATUS_ERROR)
--      {
--         /* Event 7: write HostBusy/nAutoFd=0, idle phase */
--         frob_control(fd, PARPORT_CONTROL_AUTOFD, 0);
--         
--         break;  /* done */
--      }
--   }
--
--   return i;
--}
--
--static int compat_write_data(int fd, unsigned char data)
--{
--   int len=0;
--
--   /* wait Busy=0 */
--   if (wait_status(fd, PARPORT_STATUS_BUSY, 0, PP_DEVICE_TIMEOUT))
--   {
--      BUG("compat_write_data transfer stalled\n"); 
--      goto bugout;
--   }
--
--   ioctl(fd, PPWDATA, &data);
--   wait(PP_SETUP_TIMEOUT);
--
--   /* write NStrobe=0 */
--   frob_control(fd, PARPORT_CONTROL_STROBE, 0);
--
--   /* wait Busy=1 */
--   if (wait_status(fd, PARPORT_STATUS_BUSY, PARPORT_STATUS_BUSY, PP_SIGNAL_TIMEOUT))
--   {
--      BUG("compat_write_data transfer stalled\n"); 
--      goto bugout;
--   }
--
--   /* write nStrobe=1 */
--   frob_control(fd, PARPORT_CONTROL_STROBE, PARPORT_CONTROL_STROBE);
--
--   len = 1;
--      
--bugout:
--   return len;
--}
--
--static int compat_write(int fd, const void *buffer, int size)
--{
--   int i=0;
--   unsigned char *p = (unsigned char *)buffer;
--   int m = IEEE1284_MODE_COMPAT;
--   static int timeout=0;
--
--   if (timeout)
--   {
--      timeout=0;
--      return -1;        /* report timeout */
--   }
--
--   if (ioctl(fd, PPNEGOT, &m))
--   {
--      BUG("compat_write failed: %m\n");
--      goto bugout;
--   }
--
--   for (i=0; i < size; i++)
--   {
--      if (compat_write_data(fd, p[i]) != 1)
--      {
--         if (i)
--            timeout=1;  /* save timeout, report bytes written */
--         else
--            i=-1;       /* report timeout */
--         break;
--      }
--   }
--
--bugout:
--   return i;
--}
--
- static int claim_pp(int fd)
- {
-    int stat=1;
-@@ -617,11 +121,23 @@
- 
- static int device_id(int fd, char *buffer, int size)
- {
--   int len=0, maxSize;
-+   int len=0, maxSize, mode;
- 
-    maxSize = (size > 1024) ? 1024 : size;   /* RH8 has a size limit for device id */
- 
--   len = nibble_read(fd, IEEE1284_DEVICEID, buffer, maxSize, 0);
-+   /* reset (in case someone else stopped in the middle of reading the device
-+    * ID) */
-+   mode = IEEE1284_MODE_COMPAT;
-+   ioctl(fd, PPNEGOT, &mode);
-+
-+   mode = IEEE1284_MODE_NIBBLE | IEEE1284_DEVICEID;
-+   ioctl(fd, PPNEGOT, &mode);
-+   len = read(fd, buffer, maxSize);
-+
-+   /* Reset (for safety) */
-+   mode = IEEE1284_MODE_COMPAT;
-+   ioctl(fd, PPNEGOT, &mode);
-+
-    if (len < 0)
-    {
-       BUG("unable to read device-id ret=%d\n", len);
-@@ -720,24 +236,134 @@
-    return 0;
- }
- 
-+static int ecp_write_addr(int fd, unsigned char addr)
-+{
-+   /* Currently, PPSETMODE always resets the kernel's idea of the current phase
-+    * to equal that of the inital phase of the given mode (i.e.
-+    * IEEE1284_PH_FWD_IDLE for ECP).  However, we're not actually changing the
-+    * mode, we're just modifying the "send command bytes" flag; thus, we do
-+    * *not* want the phase to change.  We workaround the kernel's bad behavor by
-+    * forcibly refreshing its phase setting whenever we call PPSETMODE.
-+    */ 
-+   int mode, phase, cmdmode, len, retval;
-+
-+   /* To send an address, we send an ECP command byte with the high bit set
-+    * and the address in the other 7 bits. */
-+   unsigned char command = addr | 0x80;
-+
-+   /* Enable command mode */
-+   ioctl(fd, PPGETMODE, &mode);
-+   cmdmode = mode | IEEE1284_ADDR;
-+   ioctl(fd, PPGETPHASE, &phase);
-+   ioctl(fd, PPSETMODE, &cmdmode);
-+   ioctl(fd, PPSETPHASE, &phase);
-+
-+   len = write(fd, &command, 1);
-+
-+   /* Restore original mode */
-+   ioctl(fd, PPGETPHASE, &phase);
-+   ioctl(fd, PPSETMODE, &mode);
-+   ioctl(fd, PPSETPHASE, &phase);
-+
-+   if (len == 1)
-+      retval = len;
-+   else
-+   {
-+      BUG("ecp_write_addr transfer failed\n");
-+      retval = -errno;
-+   } 
-+
-+   return retval; 
-+}
-+
-+static void setup_timeout(int timeout_usec, timer_t *timeout_timer)
-+{ 
-+   struct sigevent timeout_sigevent = 
-+   {
-+      .sigev_notify = SIGEV_NONE
-+   };
-+   struct itimerspec timeout = 
-+   {
-+      .it_value = 
-+      {
-+         .tv_sec = timeout_usec / 1000000,
-+         .tv_nsec = (timeout_usec % 1000000) * 1000
-+      },
-+      .it_interval = 
-+      {
-+         .tv_sec = 0,
-+         .tv_nsec = 0
-+      }
-+   };
-+
-+   timer_create(CLOCK_MONOTONIC, &timeout_sigevent, timeout_timer);
-+   timer_settime(*timeout_timer, 0, &timeout, NULL);
-+}
-+
-+static int timeout_not_expired(timer_t *timer)
-+{
-+   struct itimerspec timeout;
-+   timer_gettime(*timer, &timeout);
-+   return timeout.it_value.tv_sec > 0 || timeout.it_value.tv_nsec > 0;
-+}
-+
-+enum io_operation
-+{
-+   IO_READ,
-+   IO_WRITE
-+};
-+
-+static int ppdev_io_with_timeout(enum io_operation operation, 
-+      int fd, void *buf, int buf_size, int timeout_usec)
-+{ 
-+   /* As of Linux 2.6.39, ppdev's read and write implementations do not honor
-+    * the timeout values given by PPSETTIME ioctls.  Furthermore, when using
-+    * blocking IO, ppdev reads and writes will block forever until at least one
-+    * byte is transfered, which is a problem if, say, the peripheral has lost
-+    * power and will never respond.  To avoid these issues, we use non-blocking
-+    * IO and we implement the timeout ourselves. */
-+
-+   int offset = 0, retval = 0, error = 0;
-+   timer_t timeout_timer;
-+
-+   setup_timeout(timeout_usec, &timeout_timer);
-+   
-+   do {
-+      switch (operation)
-+      {
-+         case IO_READ:
-+            retval = read(fd, buf + offset, buf_size - offset);
-+            break;
-+         case IO_WRITE:
-+            retval = write(fd, buf + offset, buf_size - offset);
-+            break;
-+      }
-+
-+      if (retval >= 0)
-+         offset += retval;
-+      else if (errno != EAGAIN)
-+         error = errno;
-+   } while (!error && offset < buf_size && timeout_not_expired(&timeout_timer));
-+
-+   timer_delete(timeout_timer);
-+
-+   if (error)
-+      return -error;
-+   else if (offset == 0)
-+      return -ETIMEDOUT;
-+   else
-+      return offset;
-+}
-+
- /*********************************************************************************************************************************
-  * Parallel port mud_device functions.
-  */
- 
- int __attribute__ ((visibility ("hidden"))) pp_write(int fd, const void *buf, int size, int usec)
- {
--   int len=0, m;
-+   int len;
- 
--   ioctl(fd, PPGETMODE, &m);
--
--   if (m & (IEEE1284_MODE_ECPSWE | IEEE1284_MODE_ECP))
--   {
--      len = ecp_write(fd, buf, size);
--   }
--   else
--   {  
--      len = compat_write(fd, buf, size);
--   }
-+   len = ppdev_io_with_timeout(IO_WRITE, fd, (void *)buf, size, usec);
- 
-    DBG("write fd=%d len=%d size=%d\n", fd, len, size);
-    DBG_DUMP(buf, len < 32 ? len : 32);
-@@ -747,19 +373,9 @@
- 
- int __attribute__ ((visibility ("hidden"))) pp_read(int fd, void *buf, int size, int usec)
- {
--   int len=0, m;
--//   int sec = usec/1000000;
--
--   ioctl(fd, PPGETMODE, &m);
-+   int len;
- 
--   if (m & (IEEE1284_MODE_ECPSWE | IEEE1284_MODE_ECP))
--   {  
--      len = ecp_read(fd, buf, size, usec);
--   }
--   else
--   {
--      len = nibble_read(fd, 0, buf, size, usec);
--   }
-+   len = ppdev_io_with_timeout(IO_READ, fd, buf, size, usec);
- 
-    DBG("read fd=%d len=%d size=%d usec=%d\n", fd, len, size, usec);
-    DBG_DUMP(buf, len < 32 ? len : 32);
-@@ -779,9 +395,11 @@
- 
-    if (pd->id[0] == 0)
-    {
--      /* First client, open actual kernal device, use blocking i/o. */
-+      /* First client, open actual kernal device, use non-blocking i/o. See
-+       * comment in ppdev_io_with_timeout() for why we use non-blocking i/o.
-+       */
-       hpmud_get_uri_datalink(pd->uri, dev, sizeof(dev));
--      if ((fd = open(dev, O_RDWR | O_NOCTTY)) < 0)            
-+      if ((fd = open(dev, O_RDWR | O_NOCTTY | O_NONBLOCK)) < 0)            
-       {
-          BUG("unable to open %s: %m\n", pd->uri);
-          goto bugout;
-@@ -1037,7 +655,7 @@
-          goto bugout;
- 
-       /* Negotiate ECP mode. */
--      m = IEEE1284_MODE_ECPSWE;
-+      m = IEEE1284_MODE_ECP;
-       if (ioctl(pd->open_fd, PPNEGOT, &m)) 
-       {
-          BUG("unable to negotiate %s ECP mode: %m\n", pd->uri);
-@@ -1046,7 +664,7 @@
- 
-       /* Enable MLC mode with ECP channel-77. */
-       ecp_write_addr(pd->open_fd, 78);
--      ecp_write(pd->open_fd, "\0", 1);
-+      write(pd->open_fd, "\0", 1);
-       ecp_write_addr(pd->open_fd, 77);
- 
-       /* MLC initialize */
-@@ -1099,7 +717,7 @@
-       pd->mlc_up=0;
- 
-       ecp_write_addr(pd->mlc_fd, 78);     /* disable MLC mode with ECP channel-78 */
--      ecp_write(pd->mlc_fd, "\0", 1);
-+      write(pd->mlc_fd, "\0", 1);
- 
-       m = IEEE1284_MODE_NIBBLE;
-       ioctl(pd->mlc_fd, PPNEGOT, &m);
-@@ -1129,7 +747,7 @@
-          goto bugout;
- 
-       /* Negotiate ECP mode. */
--      m = IEEE1284_MODE_ECPSWE;
-+      m = IEEE1284_MODE_ECP;
-       if (ioctl(pd->open_fd, PPNEGOT, &m)) 
-       {
-          BUG("unable to negotiate %s ECP mode: %m\n", pd->uri);
-@@ -1138,7 +756,7 @@
- 
-       /* Enable MLC mode with ECP channel-77. */
-       ecp_write_addr(pd->open_fd, 78);
--      ecp_write(pd->open_fd, "\0", 1);
-+      write(pd->open_fd, "\0", 1);
-       ecp_write_addr(pd->open_fd, 77);
- 
-       /* DOT4 initialize */
-@@ -1191,7 +809,7 @@
-       pd->mlc_up=0;
- 
-       ecp_write_addr(pd->mlc_fd, 78);     /* disable MLC mode with ECP channel-78 */
--      ecp_write(pd->mlc_fd, "\0", 1);
-+      write(pd->mlc_fd, "\0", 1);
- 
-       m = IEEE1284_MODE_NIBBLE;
-       ioctl(pd->mlc_fd, PPNEGOT, &m);
-diff -ur hplip-3.12.2/io/hpmud/pp.h hplip-3.12.2-fast-pp/io/hpmud/pp.h
---- hplip-3.12.2/io/hpmud/pp.h	2012-02-01 06:53:52.000000000 -0500
-+++ hplip-3.12.2-fast-pp/io/hpmud/pp.h	2012-02-20 19:28:27.990747569 -0500
-@@ -60,18 +60,11 @@
-  *   0 - Strobe *
-  * 
-  *              * inverted
-- *
-- * Notes:
-- *   For ECP mode use low-level parport ioctl instead of high-level parport read/writes because its more reliable. High-level support
-- *   for Compatible and Nibble modes are probably ok, but for consistency low-level parport ioctl is used.
-- *
-  */
- 
--#define PP_DEVICE_TIMEOUT 30000000   /* device timeout (us) */
- //#define PP_SIGNAL_TIMEOUT 1000000   /* signal timeout (us), too long for 1ms timeout, DES 8/18/08  */
- //#define PP_SIGNAL_TIMEOUT 1000   /* signal timeout (us), too short for DJ540, DES 8/18/08 */  
- #define PP_SIGNAL_TIMEOUT 100000   /* signal timeout (us), DES 8/18/08 */
--#define PP_SETUP_TIMEOUT 10   /* setup timeout (us) */
- 
- struct _mud_device;
- struct _mud_channel;
-diff -ur hplip-3.12.2/Makefile.am hplip-3.12.2-fast-pp/Makefile.am
---- hplip-3.12.2/Makefile.am	2012-02-01 06:53:57.000000000 -0500
-+++ hplip-3.12.2-fast-pp/Makefile.am	2012-02-20 21:26:21.210745149 -0500
-@@ -73,6 +73,9 @@
- libhpmud_la_LDFLAGS = -version-info 0:6:0 -lusb -lpthread

- endif

- libhpmud_la_CFLAGS = -DMUDNAME=\"$(MUDNAME)\" -DCONFDIR=\"$(hplip_confdir)\"

-+if PP_BUILD

-+libhpmud_la_LDFLAGS += -lrt

-+endif

- 

- # ip library

- lib_LTLIBRARIES += libhpip.la

diff --git a/net-print/hplip/files/hplip-3.11.12-udev-rules.patch b/net-print/hplip/files/hplip-3.11.12-udev-rules.patch
deleted file mode 100644
index 912b49905705..000000000000
--- a/net-print/hplip/files/hplip-3.11.12-udev-rules.patch
+++ /dev/null
@@ -1,15 +0,0 @@
-diff -Naur hplip-3.11.12-old/data/rules/56-hpmud_support.rules hplip-3.11.12/data/rules/56-hpmud_support.rules
---- hplip-3.11.12-old/data/rules/56-hpmud_support.rules	2011-12-16 22:32:05.047473799 +0100
-+++ hplip-3.11.12/data/rules/56-hpmud_support.rules	2011-12-16 22:33:45.759355234 +0100
-@@ -7,9 +7,9 @@
- LABEL="pid_test"
- 
- # Check for LaserJet products (0x03f0xx17).
--ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="??17", ENV{hp_model}="$attrs{product}", ENV{hp_test}="yes"
-+ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="??17", RUN+="/bin/sh -c 'hp_model=%E{ID_MODEL} /usr/bin/hp-mkuri -c &'"
- # Check for LaserJet products (0x03f0xx2a).
--ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="??2a", ENV{hp_model}="$attrs{product}", ENV{hp_test}="yes"
-+ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="??2a", RUN+="/bin/sh -c 'hp_model=%E{ID_MODEL} /usr/bin/hp-mkuri -c &'"
- ENV{hp_test}=="yes", RUN+="/bin/sh -c '/usr/bin/hp-mkuri -c &'"
- 
- LABEL="hpmud_rules_end"
diff --git a/net-print/hplip/files/hplip-3.12.2-minimal.patch b/net-print/hplip/files/hplip-3.12.2-minimal.patch
deleted file mode 100644
index a33b7286fcde..000000000000
--- a/net-print/hplip/files/hplip-3.12.2-minimal.patch
+++ /dev/null
@@ -1,25 +0,0 @@
---- configure.in	2012-02-01 12:56:29.000000000 +0100
-+++ configure.in	2012-02-13 20:06:15.570726513 +0100
-@@ -472,7 +472,7 @@
- 
- # Check conditional packages.
- 
--if test "$hpijs_only_build" = "no" && test "$network_build" = "yes"; then
-+if test "$hpijs_only_build" = "no" && test "$network_build" = "yes" && test "$hpcups_only_build" = "no"; then
- #   AC_CHECK_LIB([crypto], [CRYPTO_free], [LIBS="$LIBS"], [AC_MSG_ERROR([cannot find net-snmp support (or --disable-network-build)], 4)])
- #   AC_CHECK_LIB([netsnmp], [snmp_timeout], [LIBS="$LIBS" AC_DEFINE([HAVE_LIBNETSNMP])], [AC_MSG_ERROR([cannot find net-snmp support (or --disable-network-build)], 4)])
- #   AC_CHECK_HEADERS(net-snmp/net-snmp-config.h,, [AC_MSG_ERROR([cannot find net-snmp-devel support (or --disable-network-build)], 5)])
-@@ -489,11 +489,11 @@
- fi
- fi
- 
--if test "$hpijs_only_build" = "no" && test "$pp_build" = "yes"; then
-+if test "$hpijs_only_build" = "no" && test "$pp_build" = "yes" && test "$hpcups_only_build" = "no"; then
-    AC_CHECK_HEADERS(linux/ppdev.h, ,[AC_MSG_ERROR([cannot find ppdev-devel support (or --disable-pp-build)], 8)])
- fi
- 
--if test "$hpijs_only_build" = "no"; then
-+if test "$hpijs_only_build" = "no" && test "$hpcups_only_build" = "no"; then
-    AC_CHECK_LIB([cups], [cupsDoFileRequest], [LIBS="$LIBS"], [AC_MSG_ERROR([cannot find libcups support], 9)])
-    AC_CHECK_HEADERS(cups/cups.h, ,[AC_MSG_ERROR([cannot find cups-devel support], 3)])
-    AC_CHECK_LIB([usb], [usb_init], [LIBS="$LIBS"], [AC_MSG_ERROR([cannot find libusb support], 2)])
diff --git a/net-print/hplip/files/hplip-3.12.2-sane.patch b/net-print/hplip/files/hplip-3.12.2-sane.patch
deleted file mode 100644
index 14d15b4a348e..000000000000
--- a/net-print/hplip/files/hplip-3.12.2-sane.patch
+++ /dev/null
@@ -1,11 +0,0 @@
-diff -Naur hplip-3.12.2-old/scan/sane.py hplip-3.12.2/scan/sane.py
---- hplip-3.12.2-old/scan/sane.py	2012-02-28 18:32:25.237883282 +0100
-+++ hplip-3.12.2/scan/sane.py	2012-02-28 18:34:00.899673377 +0100
-@@ -272,6 +272,7 @@
-             self.last_opt = self.dev.setOption(opt.index, value)
-         except scanext.error:
-             log.error("Unable to set option %s to value %s" % (key, value))
-+            return
- 
-         # do binary AND to find if we have to reload options:
-         if self.last_opt & scanext.INFO_RELOAD_OPTIONS:
diff --git a/net-print/hplip/hplip-3.12.2-r2.ebuild b/net-print/hplip/hplip-3.12.2-r2.ebuild
index cfe36db99576..5692db70dd24 100644
--- a/net-print/hplip/hplip-3.12.2-r2.ebuild
+++ b/net-print/hplip/hplip-3.12.2-r2.ebuild
@@ -1,6 +1,6 @@
 # Copyright 1999-2012 Gentoo Foundation
 # Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/net-print/hplip/hplip-3.12.2-r2.ebuild,v 1.4 2012/05/05 15:50:38 billie Exp $
+# $Header: /var/cvsroot/gentoo-x86/net-print/hplip/hplip-3.12.2-r2.ebuild,v 1.5 2012/05/06 11:42:45 billie Exp $
 
 EAPI=4
 
@@ -12,7 +12,8 @@ inherit fdo-mime linux-info python autotools
 
 DESCRIPTION="HP Linux Imaging and Printing. Includes printer, scanner, fax drivers and service tools."
 HOMEPAGE="http://hplipopensource.com/hplip-web/index.html"
-SRC_URI="mirror://sourceforge/hplip/${P}.tar.gz"
+SRC_URI="mirror://sourceforge/hplip/${P}.tar.gz
+		http://dev.gentoo.org/~billie/distfiles/${P}-patches-1.tar.xz"
 
 LICENSE="GPL-2"
 SLOT="0"
@@ -95,53 +96,15 @@ pkg_setup() {
 src_prepare() {
 	use !minimal && python_convert_shebangs -q -r 2 .
 
+	EPATCH_SUFFIX="patch" \
+	EPATCH_FORCE="yes" \
+	epatch "${WORKDIR}"
+
 	# Fix for Gentoo bug #345725
 	sed -i -e "s|/etc/udev/rules.d|/lib/udev/rules.d|" \
 		$(find ./ -type f -exec grep -l '/etc/udev/rules.d' '{}' '+') \
 		|| die
 
-	# Do not install desktop files if there is no gui
-	# Upstream bug: https://bugs.launchpad.net/hplip/+bug/452113
-	epatch "${FILESDIR}"/${PN}-3.11.1-desktop.patch
-
-	# Browser detection through xdg-open
-	# Upstream bug: https://bugs.launchpad.net/hplip/+bug/482674
-	epatch "${FILESDIR}"/${PN}-3.9.10-browser.patch
-
-	# Use cups-config when checking for cupsddk
-	# Upstream bug: https://bugs.launchpad.net/hplip/+bug/483136
-	epatch "${FILESDIR}"/${PN}-3.9.12-cupsddk.patch
-
-	# Htmldocs are not installed under docdir/html so enable htmldir configure
-	# switch
-	# Upstream bug: https://bugs.launchpad.net/hplip/+bug/483217
-	epatch "${FILESDIR}"/${PN}-3.11.1-htmldir.patch
-
-	# Let 56-hpmud_support.rules call hp-mkuri to make it work with newer udev
-	# Upstream bug: None
-	epatch "${FILESDIR}"/${PN}-3.11.12-udev-rules.patch
-
-	# CVE-2010-4267 SNMP Response Processing Buffer Overflow Vulnerability
-	# http://secunia.com/advisories/42956/
-	# https://bugzilla.redhat.com/show_bug.cgi?id=662740
-	epatch "${FILESDIR}"/${PN}-3.10.9-cve-2010-4267.patch
-
-	# Fix black stripes on pcl5c printouts
-	# Upstream bug: https://bugs.launchpad.net/hplip/+bug/561264
-	epatch "${FILESDIR}"/${PN}-3.11.12-black-stripes-pcl5c.patch
-
-	# Fix parallel port cpu usage
-	# Upstream bug: https://bugs.launchpad.net/hplip/+bug/750796
-	epatch "${FILESDIR}"/${PN}-3.11.12-fast-pp.patch
-
-	# Fix minmal/hpijs_only/hpcups_only install
-	# Upstream bug: https://bugs.launchpad.net/hplip/+bug/932918
-	epatch "${FILESDIR}"/${P}-minimal.patch
-
-	# Fix Option parsing in sane/scan.py
-	# Upstream bug: https://bugs.launchpad.net/hplip/+bug/927708
-	epatch "${FILESDIR}"/${P}-sane.patch
-
 	# Force recognition of Gentoo distro by hp-check
 	sed -i \
 		-e "s:file('/etc/issue', 'r').read():'Gentoo':" \
diff --git a/net-print/hplip/hplip-3.12.4.ebuild b/net-print/hplip/hplip-3.12.4.ebuild
index 53b21f69b2a4..d25a768c0403 100644
--- a/net-print/hplip/hplip-3.12.4.ebuild
+++ b/net-print/hplip/hplip-3.12.4.ebuild
@@ -1,6 +1,6 @@
 # Copyright 1999-2012 Gentoo Foundation
 # Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/net-print/hplip/hplip-3.12.4.ebuild,v 1.5 2012/05/06 11:00:22 billie Exp $
+# $Header: /var/cvsroot/gentoo-x86/net-print/hplip/hplip-3.12.4.ebuild,v 1.6 2012/05/06 11:42:45 billie Exp $
 
 EAPI=4
 
@@ -94,18 +94,17 @@ pkg_setup() {
 }
 
 src_prepare() {
-
 	use !minimal && python_convert_shebangs -q -r 2 .
 
+	EPATCH_SUFFIX="patch" \
+	EPATCH_FORCE="yes" \
+	epatch "${WORKDIR}"
+
 	# Fix for Gentoo bug #345725
 	sed -i -e "s|/etc/udev/rules.d|/lib/udev/rules.d|" \
 		$(find ./ -type f -exec grep -l '/etc/udev/rules.d' '{}' '+') \
 		|| die
 
-	EPATCH_SUFFIX="patch" \
-	EPATCH_FORCE="yes" \
-	epatch "${WORKDIR}"
-
 	# Force recognition of Gentoo distro by hp-check
 	sed -i \
 		-e "s:file('/etc/issue', 'r').read():'Gentoo':" \