Revision bump. Add zeroconf use flag, thanks to Piotr Mitas in bug #287156. Fix building of hpcups driver with USE="hpcups", thanks to John Feuerstein in bug #288751.

(Portage version: 2.1.6.13/cvs/Linux i686)

1 files changed, 265 insertions, 0 deletions

diff --git a/net-print/hplip/hplip-3.9.8-r3.ebuild b/net-print/hplip/hplip-3.9.8-r3.ebuild
new file mode 100644
index 000000000000..23ff2dbe4018
--- /dev/null
+++ b/net-print/hplip/hplip-3.9.8-r3.ebuild
@@ -0,0 +1,265 @@
+# Copyright 1999-2009 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/net-print/hplip/hplip-3.9.8-r3.ebuild,v 1.1 2009/10/15 18:13:32 billie Exp $
+
+EAPI="2"
+
+inherit fdo-mime linux-info python autotools
+
+DESCRIPTION="HP Linux Imaging and Printing System. Includes printer, scanner, fax drivers and service tools."
+HOMEPAGE="http://hplip.sourceforge.net/"
+SRC_URI="mirror://sourceforge/hplip/${P}.tar.gz"
+
+LICENSE="GPL-2"
+SLOT="0"
+KEYWORDS="~amd64 ~ppc ~ppc64 ~x86"
+
+IUSE="doc fax gtk +hpcups hpijs libnotify minimal parport policykit qt3 qt4 scanner snmp static-ppds -udev-acl zeroconf"
+
+# Note : libusb-compat untested (calchan 20090516)
+
+COMMON_DEPEND="
+	virtual/ghostscript
+	media-libs/jpeg
+	hpijs? ( >=net-print/foomatic-filters-3.0.20080507[cups] )
+	!static-ppds? ( || ( >=net-print/cups-1.4.0[zeroconf?] net-print/cupsddk ) )
+	udev-acl? ( >=sys-fs/udev-145[extras] )
+	!minimal? (
+		net-print/cups[zeroconf?]
+		virtual/libusb:0
+		>=dev-lang/python-2.4.4[threads,xml]
+		scanner? ( >=media-gfx/sane-backends-1.0.19-r1 )
+		snmp? (
+			net-analyzer/net-snmp
+			dev-libs/openssl
+		)
+	)"
+
+DEPEND="${COMMON_DEPEND}
+	dev-util/pkgconfig"
+
+RDEPEND="${COMMON_DEPEND}
+	!minimal? (
+		kernel_linux? ( >=sys-fs/udev-114 )
+		scanner? (
+			dev-python/imaging
+			gtk? ( media-gfx/xsane )
+			!gtk? ( media-gfx/sane-frontends )
+		)
+		fax? (
+			dev-python/reportlab
+			sys-apps/dbus
+			dev-python/dbus-python
+		)
+		qt3? ( !qt4? (
+			dev-python/PyQt
+		) )
+		qt4? (
+			dev-python/PyQt4[dbus,X]
+			dev-python/pygobject
+			libnotify? (
+				dev-python/notify-python
+			)
+			policykit? (
+				sys-auth/policykit
+			)
+		)
+	)"
+
+CONFIG_CHECK="~PARPORT ~PPDEV"
+ERROR_PARPORT="Please make sure parallel port support is enabled in your kernel (PARPORT and PPDEV)."
+
+pkg_setup() {
+	! use qt3 && ! use qt4 && ewarn "You need USE=qt4 or USE=qt3 for the hplip GUI."
+
+	use scanner && ! use gtk && ewarn "You need USE=gtk for the scanner GUI."
+
+	if ! use hpcups && ! use hpijs ; then
+		ewarn "Installing neither hpcups (USE=-hpcups) nor hpijs (USE=-hpijs) driver,"
+		ewarn "which is probably not what you want."
+		ewarn "You will almost certainly not be able to print."
+		ewarn "Recommended USE flags: USE=\"hpcups -hpijs\")."
+	fi
+
+	if use minimal ; then
+		ewarn "Installing driver portions only, make sure you know what you are doing."
+	else
+		use parport && linux-info_pkg_setup
+	fi
+}
+
+src_prepare() {
+	sed -i -e "s/'skipstone']/'skipstone', 'epiphany']/" \
+		-e "s/'skipstone': ''}/'skipstone': '', 'epiphany': '--new-window'}/" \
+		base/utils.py  || die "Sed base/utils.py failed"
+
+	# bug 98428
+	sed -i -e "s:/usr/bin/env python:/usr/bin/python:g" hpssd.py || die "Sed hpssd.py failed"
+
+	# Force recognition of Gentoo distro by hp-check
+	sed -i \
+		-e "s:file('/etc/issue', 'r').read():'Gentoo':" \
+		installer/core_install.py || die "Sed installer/core_install.py failed"
+
+	# SYSFS deprecated - https://bugs.launchpad.net/hplip/+bug/346390
+	sed -i -e "s/SYSFS/ATTRS/g" -e "s/sysfs/attrs/g" data/rules/56-hpmud_support.rules \
+		data/rules/55-hpmud.rules || die "Sed 55-hpmud.rules 56-hpmud_support.rules failed"
+
+	sed -i \
+		-e s:/usr/lib/cups/driver:$(cups-config --serverbin)/driver:g \
+		installer/core_install.py || die "Sed installer/core_install.py failed"
+
+	# Use system foomatic-rip instead of foomatic-rip-hplip
+	local i
+	for i in ppd/{hpcups,hpijs}/*.ppd.gz
+	do
+		rm -f ${i}.temp
+		gunzip -c ${i} | sed 's/foomatic-rip-hplip/foomatic-rip/g' | gzip > ${i}.temp || die "Sed *.ppd.gz failed"
+		mv ${i}.temp ${i}
+	done
+
+	local qt_ver
+	if use qt3 || use qt4 ; then
+		use qt3 && qt_ver="3"
+		use qt4 && qt_ver="4"
+		sed -i \
+			-e "s/%s --force-startup/%s --force-startup --qt${qt_ver}/" \
+			-e "s/'--force-startup'/'--force-startup', '--qt${qt_ver}'/" \
+			base/device.py || die "Sed base/device.py failed"
+		sed -i \
+			-e "s/Exec=hp-systray/Exec=hp-systray --qt${qt_ver}/" \
+			hplip-systray.desktop.in || die "Sed hplip-systray.desktop.in failed"
+	fi
+
+	# htmldocs are not installed under docdir/html
+	# the following sed enables --htmldir configure switch in src_configure
+	if use doc ; then
+			sed -i -e 's/www\([0-9]\)dir = $(docdir)/www\1dir = $(htmldir)/g' Makefile.am || die "Sed Makefile.am failed"
+	fi
+
+	eautoreconf
+}
+
+src_configure() {
+	local drv_build gui_build myconf
+
+	if use qt3 || use qt4 ; then
+		gui_build="--enable-gui-build"
+		if use qt4 ; then
+			gui_build="${gui_build} --enable-qt4 --disable-qt3"
+			if use policykit ; then
+				myconf="--enable-policykit"
+			else
+				myconf="--disable-policykit"
+			fi
+		else
+			use qt3 && gui_build="${gui_build} --enable-qt3 --disable-qt4"
+		fi
+	else
+		gui_build="--disable-gui-build --disable-qt3 --disable-qt4"
+	fi
+
+	if use fax || use qt4 ; then
+		myconf="${myconf} --enable-dbus-build"
+	else
+		myconf="${myconf} --disable-dbus-build"
+	fi
+
+	if use hpcups ; then
+		drv_build="$(use_enable hpcups hpcups-install)"
+		if use static-ppds ; then
+			drv_build="${drv_build} --enable-cups-ppd-install"
+			drv_build="${drv_build} --disable-cups-drv-install"
+		else
+			drv_build="${drv_build} --enable-cups-drv-install"
+			drv_build="${drv_build} --disable-cups-ppd-install"
+		fi
+	else
+		drv_build="--disable-hpcups-install --disable-cups-drv-install"
+		drv_build="${drv_build} --disable-cups-ppd-install"
+	fi
+
+	if use hpijs ; then
+		drv_build="${drv_build} $(use_enable hpijs hpijs-install)"
+		if use static-ppds ; then
+			drv_build="${drv_build} --enable-foomatic-ppd-install"
+			drv_build="${drv_build} --disable-foomatic-drv-install"
+		else
+			drv_build="${drv_build} --enable-foomatic-drv-install"
+			drv_build="${drv_build} --disable-foomatic-ppd-install"
+		fi
+	else
+		drv_build="${drv_build} --disable-hpijs-install"
+		drv_build="${drv_build} --disable-foomatic-drv-install"
+		drv_build="${drv_build} --disable-foomatic-ppd-install"
+	fi
+
+	econf \
+		--disable-dependency-tracking \
+		--disable-cups11-build \
+		--disable-lite-build \
+		--disable-new-hpcups \
+		--disable-foomatic-rip-hplip-install \
+		--disable-shadow-build \
+		--with-cupsbackenddir=$(cups-config --serverbin)/backend \
+		--with-cupsfilterdir=$(cups-config --serverbin)/filter \
+		--htmldir=/usr/share/doc/${P}/html \
+		${drv_build} \
+		${gui_build} \
+		${myconf} \
+		$(use_enable doc doc-build) \
+		$(use_enable fax fax-build) \
+		$(use_enable minimal hpijs-only-build) \
+		$(use_enable parport pp-build) \
+		$(use_enable scanner scan-build) \
+		$(use_enable snmp network-build) \
+		$(use_enable udev-acl udev-acl-rules)
+}
+
+src_install() {
+	emake DESTDIR="${D}" install || die "Emake install failed"
+
+	# Bug #201023
+	rm -f "${D}"/etc/sane.d/dll.conf
+
+	# bug 106035/259763
+	if ! use qt3 && ! use qt4 ; then
+		rm -r "${D}"/usr/share/applications "${D}"/etc/xdg
+	fi
+
+	# kde3 autostart hack
+	if [[ -d /usr/kde/3.5/share/autostart ]] && use !minimal ; then
+		insinto /usr/kde/3.5/share/autostart
+		doins hplip-systray.desktop
+	fi
+}
+
+pkg_preinst() {
+	# avoid collisions with cups-1.2 compat symlinks
+	if [ -e "${ROOT}"/usr/lib/cups/backend/hp ] && [ -e "${ROOT}"/usr/libexec/cups/backend/hp ] ; then
+		rm "${ROOT}"/usr/libexec/cups/backend/hp{,fax}
+	fi
+}
+
+pkg_postinst() {
+	use !minimal && python_mod_optimize /usr/share/${PN}
+	fdo-mime_desktop_database_update
+
+	elog "You should run hp-setup as root if you are installing hplip for the first time,"
+	elog "and may also need to run it if you are upgrading from an earlier version."
+	elog
+	elog "If your device is connected using USB, users will need to be in the lp group to"
+	elog "access it."
+	elog
+	elog "This release doesn't use an init script anymore, so you should probably do a"
+	elog "'rc-update del hplip' if you are updating from an old version."
+	elog
+	elog "Starting with versions of hplip >=3.9.8 mDNS is the default network search"
+	elog "mechanism. To make use of it you need to activate the zeroconf flag. If you"
+	elog "prefer the SLP method you have to choose this when configuring the device."
+}
+
+pkg_postrm() {
+	use !minimal && python_mod_cleanup /usr/share/${PN}
+	fdo-mime_desktop_database_update
+}