Delete older ebuilds.

2 files changed, 0 insertions, 270 deletions

diff --git a/app-misc/g15daemon/g15daemon-1.2.7-r1.ebuild b/app-misc/g15daemon/g15daemon-1.2.7-r1.ebuild
deleted file mode 100644
index 6e916cc0c98e..000000000000
--- a/app-misc/g15daemon/g15daemon-1.2.7-r1.ebuild
+++ /dev/null
@@ -1,132 +0,0 @@
-# Copyright 1999-2010 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/app-misc/g15daemon/g15daemon-1.2.7-r1.ebuild,v 1.5 2010/03/06 20:23:15 robbat2 Exp $
-
-inherit eutils linux-info perl-module python multilib
-
-DESCRIPTION="G15daemon takes control of the G15 keyboard, through the linux kernel uinput device driver"
-HOMEPAGE="http://g15daemon.sourceforge.net/"
-SRC_URI="mirror://sourceforge/${PN}/${P}.tar.bz2"
-
-LICENSE="GPL-2"
-SLOT="0"
-KEYWORDS="amd64 ppc ppc64 x86"
-IUSE="perl python"
-
-DEPEND="=virtual/libusb-0*
-	dev-libs/libdaemon
-	>=dev-libs/libg15-1.2.0
-	perl? ( >=dev-perl/Inline-0.4 )
-	python? ( dev-lang/python )"
-
-RDEPEND="${DEPEND}
-	perl? ( dev-perl/GDGraph )"
-
-uinput_check() {
-	ebegin "Checking for uinput support"
-	local rc=1
-	linux_config_exists && linux_chkconfig_present INPUT_UINPUT
-	rc=$?
-
-	if [[ $rc -ne 0 ]] ; then
-		eerror "To use g15daemon, you need to compile your kernel with uinput support."
-		eerror "Please enable uinput support in your kernel config, found at:"
-		eerror
-		eerror "Device Drivers -> Input Device ... -> Miscellaneous devices -> User level driver support."
-		eerror
-		eerror "Once enabled, you should have the /dev/input/uinput device."
-		eerror "g15daemon will not work without the uinput device."
-	fi
-}
-
-pkg_setup() {
-	linux-info_pkg_setup
-	uinput_check
-}
-
-src_unpack() {
-	unpack ${A}
-	if use perl; then
-		unpack "./${P}/lang-bindings/perl-G15Daemon-0.2.tar.gz"
-	fi
-	if use python; then
-		unpack "./${P}/lang-bindings/pyg15daemon-0.0.tar.bz2"
-	fi
-}
-
-src_compile() {
-	econf || die "configure failed"
-
-	emake || die "make failed"
-
-	if use perl; then
-		cd "${WORKDIR}/G15Daemon-0.2"
-		perl-module_src_compile
-	fi
-}
-
-src_install() {
-	emake DESTDIR="${D}" \
-		docdir=/usr/share/doc/${PF} install || die "make install failed"
-
-	# remove odd docs installed my make
-	rm "${D}/usr/share/doc/${PF}/"{LICENSE,README.usage}
-
-	insinto /usr/share/${PN}/contrib
-	doins contrib/xmodmaprc
-	doins contrib/xmodmap.sh
-	if use perl; then
-		doins contrib/testbindings.pl
-	fi
-
-	newconfd "${FILESDIR}/${P}.confd" ${PN}
-	newinitd "${FILESDIR}/${PF}.initd" ${PN}
-
-	if use perl; then
-		ebegin "Installing Perl Bindings (G15Daemon.pm)"
-		cd "${WORKDIR}/G15Daemon-0.2"
-		docinto perl
-		perl-module_src_install
-	fi
-
-	if use python; then
-		ebegin "Installing Python Bindings (g15daemon.py)"
-		cd "${WORKDIR}/pyg15daemon"
-		python_version
-
-		insinto /usr/$(get_libdir)/python${PYVER}/site-packages/g15daemon
-		doins g15daemon.py
-		docinto python
-		dodoc AUTHORS
-	fi
-
-	prepalldocs
-}
-
-pkg_postinst() {
-	if use python; then
-		python_version
-		python_mod_optimize /usr/$(get_libdir)/python${PYVER}/site-packages/g15daemon
-		echo ""
-	fi
-
-	elog "To use g15daemon, you need to add g15daemon to the default runlevel."
-	elog "This can be done with:"
-	elog "# /sbin/rc-update add g15daemon default"
-	elog "You can edit some g15daemon options at /etc/conf.d/g15daemon"
-	elog ""
-	elog "To have all new keys working in X11, you'll need create a "
-	elog "specific xmodmap in your home directory or edit the existent one."
-	elog ""
-	elog "Create the xmodmap:"
-	elog "cp /usr/share/g15daemon/contrib/xmodmaprc ~/.Xmodmap"
-	elog ""
-	elog "Adding keycodes to an existing xmodmap:"
-	elog "cat /usr/share/g15daemon/contrib/xmodmaprc >> ~/.Xmodmap"
-}
-
-pkg_postrm() {
-	if use python; then
-		python_mod_cleanup "/usr/$(get_libdir)/python*/site-packages/g15daemon"
-	fi
-}
diff --git a/app-misc/g15daemon/g15daemon-1.9.5.3-r2.ebuild b/app-misc/g15daemon/g15daemon-1.9.5.3-r2.ebuild
deleted file mode 100644
index 75c3f89efd2e..000000000000
--- a/app-misc/g15daemon/g15daemon-1.9.5.3-r2.ebuild
+++ /dev/null
@@ -1,138 +0,0 @@
-# Copyright 1999-2010 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/app-misc/g15daemon/g15daemon-1.9.5.3-r2.ebuild,v 1.5 2010/03/06 20:23:15 robbat2 Exp $
-
-EAPI=2
-
-inherit eutils linux-info perl-module python multilib base
-
-DESCRIPTION="G15daemon takes control of the G15 keyboard, through the linux kernel uinput device driver"
-HOMEPAGE="http://g15daemon.sourceforge.net/"
-SRC_URI="mirror://sourceforge/${PN}/${P}.tar.gz"
-
-LICENSE="GPL-2"
-SLOT="0"
-KEYWORDS="amd64 ~ppc ~ppc64 x86"
-IUSE="perl python"
-
-DEPEND="=virtual/libusb-0*
-	>=dev-libs/libg15-1.2.4
-	>=dev-libs/libg15render-1.2
-	perl? ( >=dev-perl/Inline-0.4 )
-	python? ( dev-lang/python )"
-
-RDEPEND="${DEPEND}
-	perl? ( dev-perl/GDGraph )"
-
-PATCHES=( "${FILESDIR}/${P}-forgotten-open-mode.patch" )
-uinput_check() {
-	ebegin "Checking for uinput support"
-	local rc=1
-	linux_config_exists && linux_chkconfig_present INPUT_UINPUT
-	rc=$?
-
-	if [[ $rc -ne 0 ]] ; then
-		eerror "To use g15daemon, you need to compile your kernel with uinput support."
-		eerror "Please enable uinput support in your kernel config, found at:"
-		eerror
-		eerror "Device Drivers -> Input Device ... -> Miscellaneous devices -> User level driver support."
-		eerror
-		eerror "Once enabled, you should have the /dev/input/uinput device."
-		eerror "g15daemon will not work without the uinput device."
-	fi
-}
-
-pkg_setup() {
-	linux-info_pkg_setup
-	uinput_check
-}
-
-src_unpack() {
-	unpack ${A}
-	if use perl; then
-		unpack "./${P}/lang-bindings/perl-G15Daemon-0.2.tar.gz"
-	fi
-	if use python; then
-		unpack "./${P}/lang-bindings/pyg15daemon-0.0.tar.bz2"
-	fi
-}
-
-src_compile() {
-	emake || die "make failed"
-
-	if use perl; then
-		cd "${WORKDIR}/G15Daemon-0.2"
-		perl-module_src_compile
-	fi
-}
-
-src_install() {
-	emake DESTDIR="${D}" \
-		docdir=/usr/share/doc/${PF} install || die "make install failed"
-
-	# remove odd docs installed my make
-	rm "${D}/usr/share/doc/${PF}/"{LICENSE,README.usage}
-
-	insinto /usr/share/${PN}/contrib
-	doins contrib/xmodmaprc
-	doins contrib/xmodmap.sh
-	if use perl; then
-		doins contrib/testbindings.pl
-	fi
-
-	newconfd "${FILESDIR}/${PN}-1.2.7.confd" ${PN}
-	newinitd "${FILESDIR}/${PN}-1.2.7-r2.initd" ${PN}
-	dobin "${FILESDIR}/g15daemon-hotplug"
-	insinto /etc/udev/rules.d
-	doins "${FILESDIR}/99-g15daemon.rules"
-
-	insinto /etc
-	doins "${FILESDIR}"/g15daemon.conf
-
-	if use perl; then
-		ebegin "Installing Perl Bindings (G15Daemon.pm)"
-		cd "${WORKDIR}/G15Daemon-0.2"
-		docinto perl
-		perl-module_src_install
-	fi
-
-	if use python; then
-		ebegin "Installing Python Bindings (g15daemon.py)"
-		cd "${WORKDIR}/pyg15daemon"
-		python_version
-
-		insinto /usr/$(get_libdir)/python${PYVER}/site-packages/g15daemon
-		doins g15daemon.py
-
-		docinto python
-		dodoc AUTHORS
-	fi
-}
-
-pkg_postinst() {
-	if use python; then
-		python_version
-		python_mod_optimize /usr/$(get_libdir)/python${PYVER}/site-packages/g15daemon
-		echo ""
-	fi
-
-	elog "To use g15daemon, you need to add g15daemon to the default runlevel."
-	elog "This can be done with:"
-	elog "# /sbin/rc-update add g15daemon default"
-	elog "You can edit some g15daemon options at /etc/conf.d/g15daemon"
-	elog ""
-	elog "To have all new keys working in X11, you'll need create a "
-	elog "specific xmodmap in your home directory or edit the existent one."
-	elog ""
-	elog "Create the xmodmap:"
-	elog "cp /usr/share/g15daemon/contrib/xmodmaprc ~/.Xmodmap"
-	elog ""
-	elog "Adding keycodes to an existing xmodmap:"
-	elog "cat /usr/share/g15daemon/contrib/xmodmaprc >> ~/.Xmodmap"
-}
-
-pkg_postrm() {
-	if use python; then
-		python_mod_cleanup "/usr/$(get_libdir)/python*/site-packages/g15daemon"
-	fi
-}