2 files changed, 0 insertions, 837 deletions
diff --git a/net-wireless/wpa_supplicant/wpa_supplicant-2.6-r3.ebuild b/net-wireless/wpa_supplicant/wpa_supplicant-2.6-r3.ebuild
deleted file mode 100644
index 94efb65ea575..000000000000
--- a/net-wireless/wpa_supplicant/wpa_supplicant-2.6-r3.ebuild
+++ /dev/null
@@ -1,401 +0,0 @@
-# Copyright 1999-2017 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=6
-
-inherit eutils qmake-utils systemd toolchain-funcs readme.gentoo-r1
-
-DESCRIPTION="IEEE 802.1X/WPA supplicant for secure wireless transfers"
-HOMEPAGE="https://w1.fi/wpa_supplicant/"
-SRC_URI="https://w1.fi/releases/${P}.tar.gz"
-LICENSE="|| ( GPL-2 BSD )"
-
-SLOT="0"
-KEYWORDS="~alpha amd64 arm ~arm64 ~ia64 ~mips ppc ppc64 ~sparc x86 ~x86-fbsd"
-IUSE="ap dbus gnutls eap-sim fasteap +hs2-0 libressl p2p ps3 qt5 readline selinux smartcard ssl tdls uncommon-eap-types wimax wps kernel_linux kernel_FreeBSD"
-REQUIRED_USE="fasteap? ( !ssl ) smartcard? ( ssl )"
-
-CDEPEND="dbus? ( sys-apps/dbus )
-	kernel_linux? (
-		dev-libs/libnl:3
-		net-wireless/crda
-		eap-sim? ( sys-apps/pcsc-lite )
-	)
-	!kernel_linux? ( net-libs/libpcap )
-	qt5? (
-		dev-qt/qtcore:5
-		dev-qt/qtgui:5
-		dev-qt/qtsvg:5
-		dev-qt/qtwidgets:5
-	)
-	readline? (
-		sys-libs/ncurses:0=
-		sys-libs/readline:0=
-	)
-	ssl? (
-		gnutls? (
-			dev-libs/libgcrypt:0=
-			net-libs/gnutls:=
-		)
-		!gnutls? (
-			!libressl? ( dev-libs/openssl:0= )
-			libressl? ( dev-libs/libressl:0= )
-		)
-	)
-	!ssl? ( dev-libs/libtommath )
-"
-DEPEND="${CDEPEND}
-	virtual/pkgconfig
-"
-RDEPEND="${CDEPEND}
-	selinux? ( sec-policy/selinux-networkmanager )
-"
-
-DOC_CONTENTS="
-	If this is a clean installation of wpa_supplicant, you
-	have to create a configuration file named
-	${EROOT%/}/etc/wpa_supplicant/wpa_supplicant.conf
-	An example configuration file is available for reference in
-	${EROOT%/}/usr/share/doc/${PF}/
-"
-
-S="${WORKDIR}/${P}/${PN}"
-
-Kconfig_style_config() {
-		#param 1 is CONFIG_* item
-		#param 2 is what to set it = to, defaulting in y
-		CONFIG_PARAM="${CONFIG_HEADER:-CONFIG_}$1"
-		setting="${2:-y}"
-
-		if [ ! $setting = n ]; then
-			#first remove any leading "# " if $2 is not n
-			sed -i "/^# *$CONFIG_PARAM=/s/^# *//" .config || echo "Kconfig_style_config error uncommenting $CONFIG_PARAM"
-			#set item = $setting (defaulting to y)
-			sed -i "/^$CONFIG_PARAM/s/=.*/=$setting/" .config || echo "Kconfig_style_config error setting $CONFIG_PARAM=$setting"
-		else
-			#ensure item commented out
-			sed -i "/^$CONFIG_PARAM/s/$CONFIG_PARAM/# $CONFIG_PARAM/" .config || echo "Kconfig_style_config error commenting $CONFIG_PARAM"
-		fi
-}
-
-pkg_setup() {
-	if use ssl ; then
-		if use gnutls && use libressl ; then
-			elog "You have both 'gnutls' and 'libressl' USE flags enabled: defaulting to USE=\"gnutls\""
-		fi
-	else
-		elog "You have 'ssl' USE flag disabled: defaulting to internal TLS implementation"
-	fi
-}
-
-src_prepare() {
-	default
-
-	# net/bpf.h needed for net-libs/libpcap on Gentoo/FreeBSD
-	sed -i \
-		-e "s:\(#include <pcap\.h>\):#include <net/bpf.h>\n\1:" \
-		../src/l2_packet/l2_packet_freebsd.c || die
-
-	# People seem to take the example configuration file too literally (bug #102361)
-	sed -i \
-		-e "s:^\(opensc_engine_path\):#\1:" \
-		-e "s:^\(pkcs11_engine_path\):#\1:" \
-		-e "s:^\(pkcs11_module_path\):#\1:" \
-		wpa_supplicant.conf || die
-
-	# Change configuration to match Gentoo locations (bug #143750)
-	sed -i \
-		-e "s:/usr/lib/opensc:/usr/$(get_libdir):" \
-		-e "s:/usr/lib/pkcs11:/usr/$(get_libdir):" \
-		wpa_supplicant.conf || die
-
-	# systemd entries to D-Bus service files (bug #372877)
-	echo 'SystemdService=wpa_supplicant.service' \
-		| tee -a dbus/*.service >/dev/null || die
-
-	cd "${WORKDIR}/${P}" || die
-
-	if use wimax; then
-		# generate-libeap-peer.patch comes before
-		# fix-undefined-reference-to-random_get_bytes.patch
-		eapply "${FILESDIR}/${P}-generate-libeap-peer.patch"
-
-		# multilib-strict fix (bug #373685)
-		sed -e "s/\/usr\/lib/\/usr\/$(get_libdir)/" -i src/eap_peer/Makefile || die
-	fi
-
-	# bug (320097)
-	eapply "${FILESDIR}/${P}-do-not-call-dbus-functions-with-NULL-path.patch"
-
-	# bug (596332)
-	eapply "${FILESDIR}/${P}-libressl.patch"
-
-	# https://w1.fi/security/2017-1/wpa-packet-number-reuse-with-replayed-messages.txt
-	eapply "${FILESDIR}/2017-1/rebased-v2.6-0001-hostapd-Avoid-key-reinstallation-in-FT-handshake.patch"
-	eapply "${FILESDIR}/2017-1/rebased-v2.6-0002-Prevent-reinstallation-of-an-already-in-use-group-ke.patch"
-	eapply "${FILESDIR}/2017-1/rebased-v2.6-0003-Extend-protection-of-GTK-IGTK-reinstallation-of-WNM-.patch"
-	eapply "${FILESDIR}/2017-1/rebased-v2.6-0004-Prevent-installation-of-an-all-zero-TK.patch"
-	eapply "${FILESDIR}/2017-1/rebased-v2.6-0005-Fix-PTK-rekeying-to-generate-a-new-ANonce.patch"
-	eapply "${FILESDIR}/2017-1/rebased-v2.6-0006-TDLS-Reject-TPK-TK-reconfiguration.patch"
-	eapply "${FILESDIR}/2017-1/rebased-v2.6-0007-WNM-Ignore-WNM-Sleep-Mode-Response-without-pending-r.patch"
-	eapply "${FILESDIR}/2017-1/rebased-v2.6-0008-FT-Do-not-allow-multiple-Reassociation-Response-fram.patch"
-}
-
-src_configure() {
-	# Toolchain setup
-	tc-export CC
-
-	cp defconfig .config || die
-
-	# Basic setup
-	Kconfig_style_config CTRL_IFACE
-	Kconfig_style_config MATCH_IFACE
-	Kconfig_style_config BACKEND file
-	Kconfig_style_config IBSS_RSN
-	Kconfig_style_config IEEE80211W
-	Kconfig_style_config IEEE80211R
-
-	# Basic authentication methods
-	# NOTE: we don't set GPSK or SAKE as they conflict
-	# with the below options
-	Kconfig_style_config EAP_GTC
-	Kconfig_style_config EAP_MD5
-	Kconfig_style_config EAP_OTP
-	Kconfig_style_config EAP_PAX
-	Kconfig_style_config EAP_PSK
-	Kconfig_style_config EAP_TLV
-	Kconfig_style_config EAP_EXE
-	Kconfig_style_config IEEE8021X_EAPOL
-	Kconfig_style_config PKCS12
-	Kconfig_style_config PEERKEY
-	Kconfig_style_config EAP_LEAP
-	Kconfig_style_config EAP_MSCHAPV2
-	Kconfig_style_config EAP_PEAP
-	Kconfig_style_config EAP_TLS
-	Kconfig_style_config EAP_TTLS
-
-	# Enabling background scanning.
-	Kconfig_style_config BGSCAN_SIMPLE
-	Kconfig_style_config BGSCAN_LEARN
-
-	# Enabling mesh networks.
-	Kconfig_style_config MESH
-
-	if use dbus ; then
-		Kconfig_style_config CTRL_IFACE_DBUS
-		Kconfig_style_config CTRL_IFACE_DBUS_NEW
-		Kconfig_style_config CTRL_IFACE_DBUS_INTRO
-	fi
-
-	# Enable support for writing debug info to a log file and syslog.
-	Kconfig_style_config DEBUG_FILE
-	Kconfig_style_config DEBUG_SYSLOG
-
-	if use hs2-0 ; then
-		Kconfig_style_config INTERWORKING
-		Kconfig_style_config HS20
-	fi
-
-	if use uncommon-eap-types; then
-		Kconfig_style_config EAP_GPSK
-		Kconfig_style_config EAP_SAKE
-		Kconfig_style_config EAP_GPSK_SHA256
-		Kconfig_style_config EAP_IKEV2
-		Kconfig_style_config EAP_EKE
-	fi
-
-	if use eap-sim ; then
-		# Smart card authentication
-		Kconfig_style_config EAP_SIM
-		Kconfig_style_config EAP_AKA
-		Kconfig_style_config EAP_AKA_PRIME
-		Kconfig_style_config PCSC
-	fi
-
-	if use fasteap ; then
-		Kconfig_style_config EAP_FAST
-	fi
-
-	if use readline ; then
-		# readline/history support for wpa_cli
-		Kconfig_style_config READLINE
-	else
-		#internal line edit mode for wpa_cli
-		Kconfig_style_config WPA_CLI_EDIT
-	fi
-
-	# SSL authentication methods
-	if use ssl ; then
-		if use gnutls ; then
-			Kconfig_style_config TLS gnutls
-			Kconfig_style_config GNUTLS_EXTRA
-		else
-			Kconfig_style_config TLS openssl
-		fi
-	else
-		Kconfig_style_config TLS internal
-	fi
-
-	if use smartcard ; then
-		Kconfig_style_config SMARTCARD
-	fi
-
-	if use tdls ; then
-		Kconfig_style_config TDLS
-	fi
-
-	if use kernel_linux ; then
-		# Linux specific drivers
-		Kconfig_style_config DRIVER_ATMEL
-		Kconfig_style_config DRIVER_HOSTAP
-		Kconfig_style_config DRIVER_IPW
-		Kconfig_style_config DRIVER_NL80211
-		Kconfig_style_config DRIVER_RALINK
-		Kconfig_style_config DRIVER_WEXT
-		Kconfig_style_config DRIVER_WIRED
-
-		if use ps3 ; then
-			Kconfig_style_config DRIVER_PS3
-		fi
-
-	elif use kernel_FreeBSD ; then
-		# FreeBSD specific driver
-		Kconfig_style_config DRIVER_BSD
-	fi
-
-	# Wi-Fi Protected Setup (WPS)
-	if use wps ; then
-		Kconfig_style_config WPS
-		Kconfig_style_config WPS2
-		# USB Flash Drive
-		Kconfig_style_config WPS_UFD
-		# External Registrar
-		Kconfig_style_config WPS_ER
-		# Universal Plug'n'Play
-		Kconfig_style_config WPS_UPNP
-		# Near Field Communication
-		Kconfig_style_config WPS_NFC
-	fi
-
-	# Wi-Fi Direct (WiDi)
-	if use p2p ; then
-		Kconfig_style_config P2P
-		Kconfig_style_config WIFI_DISPLAY
-	fi
-
-	# Access Point Mode
-	if use ap ; then
-		Kconfig_style_config AP
-	fi
-
-	# Enable mitigation against certain attacks against TKIP
-	Kconfig_style_config DELAYED_MIC_ERROR_REPORT
-
-	# If we are using libnl 2.0 and above, enable support for it
-	# Bug 382159
-	# Removed for now, since the 3.2 version is broken, and we don't
-	# support it.
-	if has_version ">=dev-libs/libnl-3.2"; then
-		Kconfig_style_config LIBNL32
-	fi
-
-	if use qt5 ; then
-		pushd "${S}"/wpa_gui-qt4 > /dev/null || die
-		eqmake5 wpa_gui.pro
-		popd > /dev/null || die
-	fi
-}
-
-src_compile() {
-	einfo "Building wpa_supplicant"
-	emake V=1 BINDIR=/usr/sbin
-
-	if use wimax; then
-		emake -C ../src/eap_peer clean
-		emake -C ../src/eap_peer
-	fi
-
-	if use qt5; then
-		einfo "Building wpa_gui"
-		emake -C "${S}"/wpa_gui-qt4
-	fi
-}
-
-src_install() {
-	dosbin wpa_supplicant
-	dobin wpa_cli wpa_passphrase
-
-	# baselayout-1 compat
-	if has_version "<sys-apps/baselayout-2.0.0"; then
-		dodir /sbin
-		dosym ../usr/sbin/wpa_supplicant /sbin/wpa_supplicant
-		dodir /bin
-		dosym ../usr/bin/wpa_cli /bin/wpa_cli
-	fi
-
-	if has_version ">=sys-apps/openrc-0.5.0"; then
-		newinitd "${FILESDIR}/${PN}-init.d" wpa_supplicant
-		newconfd "${FILESDIR}/${PN}-conf.d" wpa_supplicant
-	fi
-
-	exeinto /etc/wpa_supplicant/
-	newexe "${FILESDIR}/wpa_cli.sh" wpa_cli.sh
-
-	readme.gentoo_create_doc
-	dodoc ChangeLog {eap_testing,todo}.txt README{,-WPS} \
-		wpa_supplicant.conf
-
-	newdoc .config build-config
-
-	doman doc/docbook/*.{5,8}
-
-	if use qt5 ; then
-		into /usr
-		dobin wpa_gui-qt4/wpa_gui
-		doicon wpa_gui-qt4/icons/wpa_gui.svg
-		make_desktop_entry wpa_gui "WPA Supplicant Administration GUI" "wpa_gui" "Qt;Network;"
-	fi
-
-	use wimax && emake DESTDIR="${D}" -C ../src/eap_peer install
-
-	if use dbus ; then
-		pushd "${S}"/dbus > /dev/null || die
-		insinto /etc/dbus-1/system.d
-		newins dbus-wpa_supplicant.conf wpa_supplicant.conf
-		insinto /usr/share/dbus-1/system-services
-		doins fi.epitest.hostap.WPASupplicant.service fi.w1.wpa_supplicant1.service
-		popd > /dev/null || die
-
-		# This unit relies on dbus support, bug 538600.
-		systemd_dounit systemd/wpa_supplicant.service
-	fi
-
-	systemd_dounit "systemd/wpa_supplicant@.service"
-	systemd_dounit "systemd/wpa_supplicant-nl80211@.service"
-	systemd_dounit "systemd/wpa_supplicant-wired@.service"
-}
-
-pkg_postinst() {
-	readme.gentoo_print_elog
-
-	if [[ -e "${EROOT%/}"/etc/wpa_supplicant.conf ]] ; then
-		echo
-		ewarn "WARNING: your old configuration file ${EROOT%/}/etc/wpa_supplicant.conf"
-		ewarn "needs to be moved to ${EROOT%/}/etc/wpa_supplicant/wpa_supplicant.conf"
-	fi
-
-	# Mea culpa, feel free to remove that after some time --mgorny.
-	local fn
-	for fn in wpa_supplicant{,@wlan0}.service; do
-		if [[ -e "${EROOT%/}"/etc/systemd/system/network.target.wants/${fn} ]]
-		then
-			ebegin "Moving ${fn} to multi-user.target"
-			mv "${EROOT%/}"/etc/systemd/system/network.target.wants/${fn} \
-				"${EROOT%/}"/etc/systemd/system/multi-user.target.wants/ || die
-			eend ${?} \
-				"Please try to re-enable ${fn}"
-		fi
-	done
-
-	systemd_reenable wpa_supplicant.service
-}
diff --git a/net-wireless/wpa_supplicant/wpa_supplicant-2.6-r5.ebuild b/net-wireless/wpa_supplicant/wpa_supplicant-2.6-r5.ebuild
deleted file mode 100644
index db98a23c929a..000000000000
--- a/net-wireless/wpa_supplicant/wpa_supplicant-2.6-r5.ebuild
+++ /dev/null
@@ -1,436 +0,0 @@
-# Copyright 1999-2018 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=6
-
-inherit eutils qmake-utils systemd toolchain-funcs readme.gentoo-r1
-
-DESCRIPTION="IEEE 802.1X/WPA supplicant for secure wireless transfers"
-HOMEPAGE="https://w1.fi/wpa_supplicant/"
-SRC_URI="https://w1.fi/releases/${P}.tar.gz"
-LICENSE="|| ( GPL-2 BSD )"
-
-SLOT="0"
-KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~ia64 ~mips ~ppc ~ppc64 ~sparc ~x86 ~x86-fbsd"
-IUSE="ap dbus eap-sim eapol_test fasteap gnutls +hs2-0 libressl p2p privsep ps3 qt5 readline selinux smartcard ssl tdls uncommon-eap-types wimax wps kernel_linux kernel_FreeBSD"
-REQUIRED_USE="smartcard? ( ssl )"
-
-CDEPEND="dbus? ( sys-apps/dbus )
-	kernel_linux? (
-		dev-libs/libnl:3
-		net-wireless/crda
-		eap-sim? ( sys-apps/pcsc-lite )
-	)
-	!kernel_linux? ( net-libs/libpcap )
-	qt5? (
-		dev-qt/qtcore:5
-		dev-qt/qtgui:5
-		dev-qt/qtsvg:5
-		dev-qt/qtwidgets:5
-	)
-	readline? (
-		sys-libs/ncurses:0=
-		sys-libs/readline:0=
-	)
-	ssl? (
-		gnutls? (
-			dev-libs/libgcrypt:0=
-			net-libs/gnutls:=
-		)
-		!gnutls? (
-			!libressl? ( >=dev-libs/openssl-1.0.2k:0= )
-			libressl? ( dev-libs/libressl:0= )
-		)
-	)
-	!ssl? ( dev-libs/libtommath )
-"
-DEPEND="${CDEPEND}
-	virtual/pkgconfig
-"
-RDEPEND="${CDEPEND}
-	selinux? ( sec-policy/selinux-networkmanager )
-"
-
-DOC_CONTENTS="
-	If this is a clean installation of wpa_supplicant, you
-	have to create a configuration file named
-	${EROOT%/}/etc/wpa_supplicant/wpa_supplicant.conf
-	An example configuration file is available for reference in
-	${EROOT%/}/usr/share/doc/${PF}/
-"
-
-S="${WORKDIR}/${P}/${PN}"
-
-Kconfig_style_config() {
-		#param 1 is CONFIG_* item
-		#param 2 is what to set it = to, defaulting in y
-		CONFIG_PARAM="${CONFIG_HEADER:-CONFIG_}$1"
-		setting="${2:-y}"
-
-		if [ ! $setting = n ]; then
-			#first remove any leading "# " if $2 is not n
-			sed -i "/^# *$CONFIG_PARAM=/s/^# *//" .config || echo "Kconfig_style_config error uncommenting $CONFIG_PARAM"
-			#set item = $setting (defaulting to y)
-			sed -i "/^$CONFIG_PARAM/s/=.*/=$setting/" .config || echo "Kconfig_style_config error setting $CONFIG_PARAM=$setting"
-			if [ -z "$( grep ^$CONFIG_PARAM= .config )" ] ; then
-				echo "$CONFIG_PARAM=$setting" >>.config
-			fi
-		else
-			#ensure item commented out
-			sed -i "/^$CONFIG_PARAM/s/$CONFIG_PARAM/# $CONFIG_PARAM/" .config || echo "Kconfig_style_config error commenting $CONFIG_PARAM"
-		fi
-}
-
-pkg_setup() {
-	if use ssl ; then
-		if use gnutls && use libressl ; then
-			elog "You have both 'gnutls' and 'libressl' USE flags enabled: defaulting to USE=\"gnutls\""
-		fi
-	else
-		elog "You have 'ssl' USE flag disabled: defaulting to internal TLS implementation"
-	fi
-}
-
-src_prepare() {
-	default
-
-	# net/bpf.h needed for net-libs/libpcap on Gentoo/FreeBSD
-	sed -i \
-		-e "s:\(#include <pcap\.h>\):#include <net/bpf.h>\n\1:" \
-		../src/l2_packet/l2_packet_freebsd.c || die
-
-	# People seem to take the example configuration file too literally (bug #102361)
-	sed -i \
-		-e "s:^\(opensc_engine_path\):#\1:" \
-		-e "s:^\(pkcs11_engine_path\):#\1:" \
-		-e "s:^\(pkcs11_module_path\):#\1:" \
-		wpa_supplicant.conf || die
-
-	# Change configuration to match Gentoo locations (bug #143750)
-	sed -i \
-		-e "s:/usr/lib/opensc:/usr/$(get_libdir):" \
-		-e "s:/usr/lib/pkcs11:/usr/$(get_libdir):" \
-		wpa_supplicant.conf || die
-
-	# systemd entries to D-Bus service files (bug #372877)
-	echo 'SystemdService=wpa_supplicant.service' \
-		| tee -a dbus/*.service >/dev/null || die
-
-	cd "${WORKDIR}/${P}" || die
-
-	if use wimax; then
-		# generate-libeap-peer.patch comes before
-		# fix-undefined-reference-to-random_get_bytes.patch
-		eapply "${FILESDIR}/${P}-generate-libeap-peer.patch"
-
-		# multilib-strict fix (bug #373685)
-		sed -e "s/\/usr\/lib/\/usr\/$(get_libdir)/" -i src/eap_peer/Makefile || die
-	fi
-
-	# bug (320097)
-	eapply "${FILESDIR}/${P}-do-not-call-dbus-functions-with-NULL-path.patch"
-
-	# bug (596332)
-	eapply "${FILESDIR}/${P}-libressl.patch"
-
-	# https://w1.fi/security/2017-1/wpa-packet-number-reuse-with-replayed-messages.txt
-	eapply "${FILESDIR}/2017-1/rebased-v2.6-0001-hostapd-Avoid-key-reinstallation-in-FT-handshake.patch"
-	eapply "${FILESDIR}/2017-1/rebased-v2.6-0002-Prevent-reinstallation-of-an-already-in-use-group-ke.patch"
-	eapply "${FILESDIR}/2017-1/rebased-v2.6-0003-Extend-protection-of-GTK-IGTK-reinstallation-of-WNM-.patch"
-	eapply "${FILESDIR}/2017-1/rebased-v2.6-0004-Prevent-installation-of-an-all-zero-TK.patch"
-	eapply "${FILESDIR}/2017-1/rebased-v2.6-0005-Fix-PTK-rekeying-to-generate-a-new-ANonce.patch"
-	eapply "${FILESDIR}/2017-1/rebased-v2.6-0006-TDLS-Reject-TPK-TK-reconfiguration.patch"
-	eapply "${FILESDIR}/2017-1/rebased-v2.6-0007-WNM-Ignore-WNM-Sleep-Mode-Response-without-pending-r.patch"
-	eapply "${FILESDIR}/2017-1/rebased-v2.6-0008-FT-Do-not-allow-multiple-Reassociation-Response-fram.patch"
-
-	# bug (640492)
-	sed -i 's#-Werror ##' wpa_supplicant/Makefile || die
-}
-
-src_configure() {
-	# Toolchain setup
-	tc-export CC
-
-	cp defconfig .config || die
-
-	# Basic setup
-	Kconfig_style_config CTRL_IFACE
-	Kconfig_style_config MATCH_IFACE
-	Kconfig_style_config BACKEND file
-	Kconfig_style_config IBSS_RSN
-	Kconfig_style_config IEEE80211W
-	Kconfig_style_config IEEE80211R
-
-	# Basic authentication methods
-	# NOTE: we don't set GPSK or SAKE as they conflict
-	# with the below options
-	Kconfig_style_config EAP_GTC
-	Kconfig_style_config EAP_MD5
-	Kconfig_style_config EAP_OTP
-	Kconfig_style_config EAP_PAX
-	Kconfig_style_config EAP_PSK
-	Kconfig_style_config EAP_TLV
-	Kconfig_style_config EAP_EXE
-	Kconfig_style_config IEEE8021X_EAPOL
-	Kconfig_style_config PKCS12
-	Kconfig_style_config PEERKEY
-	Kconfig_style_config EAP_LEAP
-	Kconfig_style_config EAP_MSCHAPV2
-	Kconfig_style_config EAP_PEAP
-	Kconfig_style_config EAP_TLS
-	Kconfig_style_config EAP_TTLS
-
-	# Enabling background scanning.
-	Kconfig_style_config BGSCAN_SIMPLE
-	Kconfig_style_config BGSCAN_LEARN
-
-	if use dbus ; then
-		Kconfig_style_config CTRL_IFACE_DBUS
-		Kconfig_style_config CTRL_IFACE_DBUS_NEW
-		Kconfig_style_config CTRL_IFACE_DBUS_INTRO
-	fi
-
-	if use eapol_test ; then
-		Kconfig_style_config EAPOL_TEST
-	fi
-
-	# Enable support for writing debug info to a log file and syslog.
-	Kconfig_style_config DEBUG_FILE
-	Kconfig_style_config DEBUG_SYSLOG
-
-	if use hs2-0 ; then
-		Kconfig_style_config INTERWORKING
-		Kconfig_style_config HS20
-	fi
-
-	if use uncommon-eap-types; then
-		Kconfig_style_config EAP_GPSK
-		Kconfig_style_config EAP_SAKE
-		Kconfig_style_config EAP_GPSK_SHA256
-		Kconfig_style_config EAP_IKEV2
-		Kconfig_style_config EAP_EKE
-	fi
-
-	if use eap-sim ; then
-		# Smart card authentication
-		Kconfig_style_config EAP_SIM
-		Kconfig_style_config EAP_AKA
-		Kconfig_style_config EAP_AKA_PRIME
-		Kconfig_style_config PCSC
-	fi
-
-	if use fasteap ; then
-		Kconfig_style_config EAP_FAST
-	fi
-
-	if use readline ; then
-		# readline/history support for wpa_cli
-		Kconfig_style_config READLINE
-	else
-		#internal line edit mode for wpa_cli
-		Kconfig_style_config WPA_CLI_EDIT
-	fi
-
-	# SSL authentication methods
-	if use ssl ; then
-		if use gnutls ; then
-			Kconfig_style_config TLS gnutls
-			Kconfig_style_config GNUTLS_EXTRA
-		else
-			Kconfig_style_config TLS openssl
-			Kconfig_style_config EAP_PWD
-
-			# Enabling mesh networks.
-			Kconfig_style_config MESH
-		fi
-	else
-		Kconfig_style_config TLS internal
-	fi
-
-	if use smartcard ; then
-		Kconfig_style_config SMARTCARD
-	fi
-
-	if use tdls ; then
-		Kconfig_style_config TDLS
-	fi
-
-	if use kernel_linux ; then
-		# Linux specific drivers
-		Kconfig_style_config DRIVER_ATMEL
-		Kconfig_style_config DRIVER_HOSTAP
-		Kconfig_style_config DRIVER_IPW
-		Kconfig_style_config DRIVER_NL80211
-		Kconfig_style_config DRIVER_RALINK
-		Kconfig_style_config DRIVER_WEXT
-		Kconfig_style_config DRIVER_WIRED
-
-		if use ps3 ; then
-			Kconfig_style_config DRIVER_PS3
-		fi
-
-	elif use kernel_FreeBSD ; then
-		# FreeBSD specific driver
-		Kconfig_style_config DRIVER_BSD
-	fi
-
-	# Wi-Fi Protected Setup (WPS)
-	if use wps ; then
-		Kconfig_style_config WPS
-		Kconfig_style_config WPS2
-		# USB Flash Drive
-		Kconfig_style_config WPS_UFD
-		# External Registrar
-		Kconfig_style_config WPS_ER
-		# Universal Plug'n'Play
-		Kconfig_style_config WPS_UPNP
-		# Near Field Communication
-		Kconfig_style_config WPS_NFC
-	fi
-
-	# Wi-Fi Direct (WiDi)
-	if use p2p ; then
-		Kconfig_style_config P2P
-		Kconfig_style_config WIFI_DISPLAY
-	fi
-
-	# Access Point Mode
-	if use ap ; then
-		Kconfig_style_config AP
-	fi
-
-	# Enable essentials for AP/P2P
-	if use ap || use p2p ; then
-		# Enabling HT support (802.11n)
-		Kconfig_style_config IEEE80211N
-
-		# Enabling VHT support (802.11ac)
-		Kconfig_style_config IEEE80211AC
-	fi
-
-	# Enable mitigation against certain attacks against TKIP
-	Kconfig_style_config DELAYED_MIC_ERROR_REPORT
-
-	if use privsep ; then
-		Kconfig_style_config PRIVSEP
-	fi
-
-	# If we are using libnl 2.0 and above, enable support for it
-	# Bug 382159
-	# Removed for now, since the 3.2 version is broken, and we don't
-	# support it.
-	if has_version ">=dev-libs/libnl-3.2"; then
-		Kconfig_style_config LIBNL32
-	fi
-
-	if use qt5 ; then
-		pushd "${S}"/wpa_gui-qt4 > /dev/null || die
-		eqmake5 wpa_gui.pro
-		popd > /dev/null || die
-	fi
-}
-
-src_compile() {
-	einfo "Building wpa_supplicant"
-	emake V=1 BINDIR=/usr/sbin
-
-	if use wimax; then
-		emake -C ../src/eap_peer clean
-		emake -C ../src/eap_peer
-	fi
-
-	if use qt5; then
-		einfo "Building wpa_gui"
-		emake -C "${S}"/wpa_gui-qt4
-	fi
-
-	if use eapol_test ; then
-		emake eapol_test
-	fi
-}
-
-src_install() {
-	dosbin wpa_supplicant
-	use privsep && dosbin wpa_priv
-	dobin wpa_cli wpa_passphrase
-
-	# baselayout-1 compat
-	if has_version "<sys-apps/baselayout-2.0.0"; then
-		dodir /sbin
-		dosym ../usr/sbin/wpa_supplicant /sbin/wpa_supplicant
-		dodir /bin
-		dosym ../usr/bin/wpa_cli /bin/wpa_cli
-	fi
-
-	if has_version ">=sys-apps/openrc-0.5.0"; then
-		newinitd "${FILESDIR}/${PN}-init.d" wpa_supplicant
-		newconfd "${FILESDIR}/${PN}-conf.d" wpa_supplicant
-	fi
-
-	exeinto /etc/wpa_supplicant/
-	newexe "${FILESDIR}/wpa_cli.sh" wpa_cli.sh
-
-	readme.gentoo_create_doc
-	dodoc ChangeLog {eap_testing,todo}.txt README{,-WPS} \
-		wpa_supplicant.conf
-
-	newdoc .config build-config
-
-	doman doc/docbook/*.{5,8}
-
-	if use qt5 ; then
-		into /usr
-		dobin wpa_gui-qt4/wpa_gui
-		doicon wpa_gui-qt4/icons/wpa_gui.svg
-		make_desktop_entry wpa_gui "WPA Supplicant Administration GUI" "wpa_gui" "Qt;Network;"
-	else
-		rm "${ED}"/usr/share/man/man8/wpa_gui.8
-	fi
-
-	use wimax && emake DESTDIR="${D}" -C ../src/eap_peer install
-
-	if use dbus ; then
-		pushd "${S}"/dbus > /dev/null || die
-		insinto /etc/dbus-1/system.d
-		newins dbus-wpa_supplicant.conf wpa_supplicant.conf
-		insinto /usr/share/dbus-1/system-services
-		doins fi.epitest.hostap.WPASupplicant.service fi.w1.wpa_supplicant1.service
-		popd > /dev/null || die
-
-		# This unit relies on dbus support, bug 538600.
-		systemd_dounit systemd/wpa_supplicant.service
-	fi
-
-	if use eapol_test ; then
-		dobin eapol_test
-	fi
-
-	systemd_dounit "systemd/wpa_supplicant@.service"
-	systemd_dounit "systemd/wpa_supplicant-nl80211@.service"
-	systemd_dounit "systemd/wpa_supplicant-wired@.service"
-}
-
-pkg_postinst() {
-	readme.gentoo_print_elog
-
-	if [[ -e "${EROOT%/}"/etc/wpa_supplicant.conf ]] ; then
-		echo
-		ewarn "WARNING: your old configuration file ${EROOT%/}/etc/wpa_supplicant.conf"
-		ewarn "needs to be moved to ${EROOT%/}/etc/wpa_supplicant/wpa_supplicant.conf"
-	fi
-
-	# Mea culpa, feel free to remove that after some time --mgorny.
-	local fn
-	for fn in wpa_supplicant{,@wlan0}.service; do
-		if [[ -e "${EROOT%/}"/etc/systemd/system/network.target.wants/${fn} ]]
-		then
-			ebegin "Moving ${fn} to multi-user.target"
-			mv "${EROOT%/}"/etc/systemd/system/network.target.wants/${fn} \
-				"${EROOT%/}"/etc/systemd/system/multi-user.target.wants/ || die
-			eend ${?} \
-				"Please try to re-enable ${fn}"
-		fi
-	done
-
-	systemd_reenable wpa_supplicant.service
-}