From 89d6fee44de42605d58466807b458a8443ff5f00 Mon Sep 17 00:00:00 2001 From: Bjarke Istrup Pedersen Date: Sun, 23 May 2010 15:01:04 +0000 Subject: Bumping to 0.7.2 (Portage version: 2.2_rc67/cvs/Linux i686) --- net-wireless/hostapd/ChangeLog | 8 +- net-wireless/hostapd/hostapd-0.7.1.ebuild | 193 ------------------------------ net-wireless/hostapd/hostapd-0.7.2.ebuild | 193 ++++++++++++++++++++++++++++++ 3 files changed, 200 insertions(+), 194 deletions(-) delete mode 100644 net-wireless/hostapd/hostapd-0.7.1.ebuild create mode 100644 net-wireless/hostapd/hostapd-0.7.2.ebuild (limited to 'net-wireless/hostapd') diff --git a/net-wireless/hostapd/ChangeLog b/net-wireless/hostapd/ChangeLog index 02aac444f43f..5259db167e31 100644 --- a/net-wireless/hostapd/ChangeLog +++ b/net-wireless/hostapd/ChangeLog @@ -1,6 +1,12 @@ # ChangeLog for net-wireless/hostapd # Copyright 1999-2010 Gentoo Foundation; Distributed under the GPL v2 -# $Header: /var/cvsroot/gentoo-x86/net-wireless/hostapd/ChangeLog,v 1.106 2010/01/24 20:49:34 gurligebis Exp $ +# $Header: /var/cvsroot/gentoo-x86/net-wireless/hostapd/ChangeLog,v 1.107 2010/05/23 15:01:04 gurligebis Exp $ + +*hostapd-0.7.2 (23 May 2010) + + 23 May 2010; Bjarke Istrup Pedersen + -hostapd-0.7.1.ebuild, +hostapd-0.7.2.ebuild: + Bumping to 0.7.2, fixing bug #319923 *hostapd-0.7.1 (24 Jan 2010) diff --git a/net-wireless/hostapd/hostapd-0.7.1.ebuild b/net-wireless/hostapd/hostapd-0.7.1.ebuild deleted file mode 100644 index ad330b219d76..000000000000 --- a/net-wireless/hostapd/hostapd-0.7.1.ebuild +++ /dev/null @@ -1,193 +0,0 @@ -# Copyright 1999-2010 Gentoo Foundation -# Distributed under the terms of the GNU General Public License v2 -# $Header: /var/cvsroot/gentoo-x86/net-wireless/hostapd/hostapd-0.7.1.ebuild,v 1.1 2010/01/24 20:49:34 gurligebis Exp $ - -EAPI="2" - -inherit toolchain-funcs eutils - -DESCRIPTION="IEEE 802.11 wireless LAN Host AP daemon" -HOMEPAGE="http://hostap.epitest.fi" -SRC_URI="http://hostap.epitest.fi/releases/${P}.tar.gz" - -LICENSE="|| ( GPL-2 BSD )" -SLOT="0" -KEYWORDS="~amd64 ~ppc ~x86" -IUSE="debug ipv6 logwatch madwifi +ssl +wps" - -DEPEND="ssl? ( dev-libs/openssl ) - >=dev-libs/libnl-1.1 - madwifi? ( || - ( >net-wireless/madwifi-ng-tools-0.9.3 - net-wireless/madwifi-old ) )" -RDEPEND="${DEPEND}" - -S="${S}/hostapd" - -src_prepare() { - sed -i -e "s:/etc/hostapd:/etc/hostapd/hostapd:g" \ - "${S}/hostapd.conf" -} - -src_configure() { - local CONFIG="${S}/.config" - - # toolchain setup - echo "CC = $(tc-getCC)" > ${CONFIG} - - # EAP authentication methods - echo "CONFIG_EAP=y" >> ${CONFIG} - echo "CONFIG_EAP_MD5=y" >> ${CONFIG} - - if use ssl; then - # SSL authentication methods - echo "CONFIG_EAP_TLS=y" >> ${CONFIG} - echo "CONFIG_EAP_TTLS=y" >> ${CONFIG} - echo "CONFIG_EAP_MSCHAPV2=y" >> ${CONFIG} - echo "CONFIG_EAP_PEAP=y" >> ${CONFIG} - fi - - if use wps; then - # Enable Wi-Fi Protected Setup - echo "CONFIG_WPS=y" >> ${CONFIG} - echo "CONFIG_WPS_UPNP=y" >> ${CONFIG} - einfo "Enabling Wi-Fi Protected Setup support" - fi - - echo "CONFIG_EAP_GTC=y" >> ${CONFIG} - echo "CONFIG_EAP_SIM=y" >> ${CONFIG} - echo "CONFIG_EAP_AKA=y" >> ${CONFIG} - echo "CONFIG_EAP_PAX=y" >> ${CONFIG} - echo "CONFIG_EAP_PSK=y" >> ${CONFIG} - echo "CONFIG_EAP_SAKE=y" >> ${CONFIG} - echo "CONFIG_EAP_GPSK=y" >> ${CONFIG} - echo "CONFIG_EAP_GPSK_SHA256=y" >> ${CONFIG} - - einfo "Enabling drivers: " - - # drivers - echo "CONFIG_DRIVER_HOSTAP=y" >> ${CONFIG} - einfo " HostAP driver enabled" - echo "CONFIG_DRIVER_WIRED=y" >> ${CONFIG} - einfo " Wired driver enabled" - echo "CONFIG_DRIVER_PRISM54=y" >> ${CONFIG} - einfo " Prism54 driver enabled" - echo "CONFIG_DRIVER_NONE=y" >> ${CONFIG} - einfo " None driver enabled" - - if use madwifi; then - # Add include path for madwifi-driver headers - einfo " Madwifi driver enabled" - echo "CFLAGS += -I/usr/include/madwifi" >> ${CONFIG} - echo "CONFIG_DRIVER_MADWIFI=y" >> ${CONFIG} - else - einfo " Madwifi driver disabled" - fi - - einfo " nl80211 driver enabled" - echo "CONFIG_DRIVER_NL80211=y" >> ${CONFIG} - echo "CFLAGS += -I/usr/include/netlink" >> ${CONFIG} - echo "LIBS += -L/usr/lib" >> ${CONFIG} - - # misc - echo "CONFIG_PKCS12=y" >> ${CONFIG} - echo "CONFIG_RADIUS_SERVER=y" >> ${CONFIG} - echo "CONFIG_IAPP=y" >> ${CONFIG} - echo "CONFIG_IEEE80211R=y" >> ${CONFIG} - echo "CONFIG_IEEE80211W=y" >> ${CONFIG} - echo "CONFIG_IEEE80211N=y" >> ${CONFIG} - echo "CONFIG_PEERKEY=y" >> ${CONFIG} - echo "CONFIG_RSN_PREAUTH=y" >> ${CONFIG} - - if use ipv6; then - # IPv6 support - echo "CONFIG_IPV6=y" >> ${CONFIG} - fi - - if ! use debug; then - echo "CONFIG_NO_STDOUT_DEBUG=y" >> ${CONFIG} - fi - - # TODO: Add support for BSD drivers - - default_src_configure -} - -src_compile() { - default_src_compile - - #emake || die "emake failed" - - if use ssl; then - emake nt_password_hash || die "emake nt_password_hash failed" - emake hlr_auc_gw || die "emake hlr_auc_gw failed" - fi -} - -src_install() { - insinto /etc/hostapd - doins hostapd.conf hostapd.accept hostapd.deny \ - hostapd.eap_user hostapd.radius_clients hostapd.sim_db hostapd.wpa_psk - - dosbin hostapd - dobin hostapd_cli - - use ssl && dobin nt_password_hash - use ssl && dobin hlr_auc_gw - - newinitd "${FILESDIR}"/${PN}-init.d hostapd - newconfd "${FILESDIR}"/${PN}-conf.d hostapd - - doman hostapd.8 hostapd_cli.1 - - dodoc ChangeLog README - if use wps; then - dodoc README-WPS - fi - - docinto examples - dodoc wired.conf - - if use logwatch; then - insinto /etc/log.d/conf/services/ - doins logwatch/hostapd.conf - - exeinto /etc/log.d/scripts/services/ - doexe logwatch/hostapd - fi -} - -pkg_postinst() { - einfo - einfo "In order to use ${PN} you need to set up your wireless card" - einfo "for master mode in /etc/conf.d/net and then start" - einfo "/etc/init.d/hostapd." - einfo - einfo "Example configuration:" - einfo - einfo "config_wlan0=( \"192.168.1.1/24\" )" - einfo "channel_wlan0=\"6\"" - einfo "essid_wlan0=\"test\"" - einfo "mode_wlan0=\"master\"" - einfo - if use madwifi; then - einfo "This package compiles against the headers installed by" - einfo "madwifi-old, madwifi-ng or madwifi-ng-tools." - einfo "You should remerge ${PN} after upgrading these packages." - einfo - einfo "Since you are using the madwifi-ng driver, you should disable or" - einfo "comment out wme_enabled from hostapd.conf, since it will" - einfo "cause problems otherwise (see bug #260377" - fi - #if [ -e "${KV_DIR}"/net/mac80211 ]; then - # einfo "This package now compiles against the headers installed by" - # einfo "the kernel source for the mac80211 driver. You should " - # einfo "re-emerge ${PN} after upgrading your kernel source." - #fi - - if use wps; then - einfo "You have enabled Wi-Fi Protected Setup support, please" - einfo "read the README-WPS file in /usr/share/doc/${P}" - einfo "for info on how to use WPS" - fi -} diff --git a/net-wireless/hostapd/hostapd-0.7.2.ebuild b/net-wireless/hostapd/hostapd-0.7.2.ebuild new file mode 100644 index 000000000000..a013f0586e35 --- /dev/null +++ b/net-wireless/hostapd/hostapd-0.7.2.ebuild @@ -0,0 +1,193 @@ +# Copyright 1999-2010 Gentoo Foundation +# Distributed under the terms of the GNU General Public License v2 +# $Header: /var/cvsroot/gentoo-x86/net-wireless/hostapd/hostapd-0.7.2.ebuild,v 1.1 2010/05/23 15:01:04 gurligebis Exp $ + +EAPI="2" + +inherit toolchain-funcs eutils + +DESCRIPTION="IEEE 802.11 wireless LAN Host AP daemon" +HOMEPAGE="http://hostap.epitest.fi" +SRC_URI="http://hostap.epitest.fi/releases/${P}.tar.gz" + +LICENSE="|| ( GPL-2 BSD )" +SLOT="0" +KEYWORDS="~amd64 ~ppc ~x86" +IUSE="debug ipv6 logwatch madwifi +ssl +wps" + +DEPEND="ssl? ( dev-libs/openssl ) + >=dev-libs/libnl-1.1 + madwifi? ( || + ( >net-wireless/madwifi-ng-tools-0.9.3 + net-wireless/madwifi-old ) )" +RDEPEND="${DEPEND}" + +S="${S}/hostapd" + +src_prepare() { + sed -i -e "s:/etc/hostapd:/etc/hostapd/hostapd:g" \ + "${S}/hostapd.conf" +} + +src_configure() { + local CONFIG="${S}/.config" + + # toolchain setup + echo "CC = $(tc-getCC)" > ${CONFIG} + + # EAP authentication methods + echo "CONFIG_EAP=y" >> ${CONFIG} + echo "CONFIG_EAP_MD5=y" >> ${CONFIG} + + if use ssl; then + # SSL authentication methods + echo "CONFIG_EAP_TLS=y" >> ${CONFIG} + echo "CONFIG_EAP_TTLS=y" >> ${CONFIG} + echo "CONFIG_EAP_MSCHAPV2=y" >> ${CONFIG} + echo "CONFIG_EAP_PEAP=y" >> ${CONFIG} + fi + + if use wps; then + # Enable Wi-Fi Protected Setup + echo "CONFIG_WPS=y" >> ${CONFIG} + echo "CONFIG_WPS_UPNP=y" >> ${CONFIG} + einfo "Enabling Wi-Fi Protected Setup support" + fi + + echo "CONFIG_EAP_GTC=y" >> ${CONFIG} + echo "CONFIG_EAP_SIM=y" >> ${CONFIG} + echo "CONFIG_EAP_AKA=y" >> ${CONFIG} + echo "CONFIG_EAP_PAX=y" >> ${CONFIG} + echo "CONFIG_EAP_PSK=y" >> ${CONFIG} + echo "CONFIG_EAP_SAKE=y" >> ${CONFIG} + echo "CONFIG_EAP_GPSK=y" >> ${CONFIG} + echo "CONFIG_EAP_GPSK_SHA256=y" >> ${CONFIG} + + einfo "Enabling drivers: " + + # drivers + echo "CONFIG_DRIVER_HOSTAP=y" >> ${CONFIG} + einfo " HostAP driver enabled" + echo "CONFIG_DRIVER_WIRED=y" >> ${CONFIG} + einfo " Wired driver enabled" + echo "CONFIG_DRIVER_PRISM54=y" >> ${CONFIG} + einfo " Prism54 driver enabled" + echo "CONFIG_DRIVER_NONE=y" >> ${CONFIG} + einfo " None driver enabled" + + if use madwifi; then + # Add include path for madwifi-driver headers + einfo " Madwifi driver enabled" + echo "CFLAGS += -I/usr/include/madwifi" >> ${CONFIG} + echo "CONFIG_DRIVER_MADWIFI=y" >> ${CONFIG} + else + einfo " Madwifi driver disabled" + fi + + einfo " nl80211 driver enabled" + echo "CONFIG_DRIVER_NL80211=y" >> ${CONFIG} + echo "CFLAGS += -I/usr/include/netlink" >> ${CONFIG} + echo "LIBS += -L/usr/lib" >> ${CONFIG} + + # misc + echo "CONFIG_PKCS12=y" >> ${CONFIG} + echo "CONFIG_RADIUS_SERVER=y" >> ${CONFIG} + echo "CONFIG_IAPP=y" >> ${CONFIG} + echo "CONFIG_IEEE80211R=y" >> ${CONFIG} + echo "CONFIG_IEEE80211W=y" >> ${CONFIG} + echo "CONFIG_IEEE80211N=y" >> ${CONFIG} + echo "CONFIG_PEERKEY=y" >> ${CONFIG} + echo "CONFIG_RSN_PREAUTH=y" >> ${CONFIG} + + if use ipv6; then + # IPv6 support + echo "CONFIG_IPV6=y" >> ${CONFIG} + fi + + if ! use debug; then + echo "CONFIG_NO_STDOUT_DEBUG=y" >> ${CONFIG} + fi + + # TODO: Add support for BSD drivers + + default_src_configure +} + +src_compile() { + default_src_compile + + #emake || die "emake failed" + + if use ssl; then + emake nt_password_hash || die "emake nt_password_hash failed" + emake hlr_auc_gw || die "emake hlr_auc_gw failed" + fi +} + +src_install() { + insinto /etc/hostapd + doins hostapd.conf hostapd.accept hostapd.deny \ + hostapd.eap_user hostapd.radius_clients hostapd.sim_db hostapd.wpa_psk + + dosbin hostapd + dobin hostapd_cli + + use ssl && dobin nt_password_hash + use ssl && dobin hlr_auc_gw + + newinitd "${FILESDIR}"/${PN}-init.d hostapd + newconfd "${FILESDIR}"/${PN}-conf.d hostapd + + doman hostapd.8 hostapd_cli.1 + + dodoc ChangeLog README + if use wps; then + dodoc README-WPS + fi + + docinto examples + dodoc wired.conf + + if use logwatch; then + insinto /etc/log.d/conf/services/ + doins logwatch/hostapd.conf + + exeinto /etc/log.d/scripts/services/ + doexe logwatch/hostapd + fi +} + +pkg_postinst() { + einfo + einfo "In order to use ${PN} you need to set up your wireless card" + einfo "for master mode in /etc/conf.d/net and then start" + einfo "/etc/init.d/hostapd." + einfo + einfo "Example configuration:" + einfo + einfo "config_wlan0=( \"192.168.1.1/24\" )" + einfo "channel_wlan0=\"6\"" + einfo "essid_wlan0=\"test\"" + einfo "mode_wlan0=\"master\"" + einfo + if use madwifi; then + einfo "This package compiles against the headers installed by" + einfo "madwifi-old, madwifi-ng or madwifi-ng-tools." + einfo "You should remerge ${PN} after upgrading these packages." + einfo + einfo "Since you are using the madwifi-ng driver, you should disable or" + einfo "comment out wme_enabled from hostapd.conf, since it will" + einfo "cause problems otherwise (see bug #260377" + fi + #if [ -e "${KV_DIR}"/net/mac80211 ]; then + # einfo "This package now compiles against the headers installed by" + # einfo "the kernel source for the mac80211 driver. You should " + # einfo "re-emerge ${PN} after upgrading your kernel source." + #fi + + if use wps; then + einfo "You have enabled Wi-Fi Protected Setup support, please" + einfo "read the README-WPS file in /usr/share/doc/${P}" + einfo "for info on how to use WPS" + fi +} -- cgit v1.2.3-65-gdbad